• ALUMA-HYDE® II BROWNELLS More Detail

    ALUMA-HYDE® II BROWNELLS

    $12.99 - $14.99$12.99 - $14.99

    Durable Epoxy Base Paint Withstands Bore Cleaners & Solvents The special feature of Aluma-Hyde II (and the reason for its development) is its increased resistance to bore cleaners, solvents and other cleaning chemicals, even trichloroethylene. Today’s family of fast, aggressive bore cleaners really do a terrific job getting dirty gun bores sparkling clean, but they can wreak particular havoc with any other finish they contact. After full cure, Aluma-Hyde II proved solvent-proof to all but the most aggressive, copper-removing bore solvents. Aluma-Hyde II is formulated with a hard-curing epoxy base that contains additional, high-density pigment for a durable finish that sticks to all properly prepared aluminum and alloy surfaces, steel and plastics - it’s great on synthetic stocks. Aluma-Hyde II is available in a variety of colors to help the gunsmith match the vast number of applications found in the average gunshop. Matte finishes are available in Parkerizing Gray (medium gray), Dark Parkerizing Gray (medium dark), Stainless Steel Gray (light), Matte Ruger Gray closely matches the factory color but reduces reflections, Earth Brown, Matte Clear, O.D. Green for creating camo pattern stocks, Desert Tan (light, desert-tan sand), Coyote (light, gray-brown) and the original favorite, Matte Black. To compliment the matte finishes, Semi-Gloss Black, Gloss Ruger Gray closely matches the factory color and shine. Gloss Clear help expand the overall applications of this time- and money-saving product. We like the Matte Black color for refinishing those used AR-15 buttstocks and handguards you pick up when building a parts gun, knock-around “truck” guns and, of course, anodized parts. Aluma-Hyde II dries to the touch in only minutes and reaches full cure in about a week. Here’s the way we apply it: Warm the part and the Aluma-Hyde II to about 90? F.; spend a couple of minutes shaking the daylights out of the Aluma-Hyde II and apply a medium coat for good coverage. You can recoat in a few minutes but don’t wait more than thirty minutes. Once Aluma-Hyde II starts curing, you must wait until it’s fully cured to recoat. You can cut the cure time to approximately two days by circulating warm air (90? F. works fine) past the part. Absolutely no primer coat is required for a tough, durable, abrasion-resistant, rustproof finish that blends beautifully and compliments all gun finishing applications. Brownells Guntechs recommend use of 084-179-004 All Purpose Clean Out Nozzle prior to attempting to spray this product. 1911, Issue:04, Page:062 AR-15, Issue:04, Page:077 Brownells Christmas , Issue:5X, Page:020 Big Book Catalog, Issue:68, Page:436 Law Enforcement / Police Store, Issue:07, Page:054 Mini-Catalogs, Issue:05, Page:010 New Product Supplement, Issue:581, Page:014

    HOT!
  • ACRAGLAS GEL® BROWNELLS More Detail

    ACRAGLAS GEL® BROWNELLS

    $14.99 - $159.99$14.99 - $159.99

    Super New Acraglas, Nylon Epoxy Derivative, Butter-Smooth Consistency, Mixes With Atomized Metals Over the years we had hundreds of customer requests for an epoxy accurizing compound with a butter-smooth consistency which would neither run, drip or leach out from between wood and metal after being placed in the gun stock. After many years of research and testing, we perfected a modified version of our popular Acraglas® that gives the same super accurizing bedding job and also meets those specialized smooth application features you have asked for. Acraglas Gel was designed to take advantage of the latest technological advancements in epoxy research. It has the best possible advantages built into it for those that want a butter-smooth type of Acraglas. Nylon Derivatives are formulated into Acraglas Gel and provide greater "thin strength," shock resistance and stability over normal temperature extremes. Slightly less shrinkage than that of Acraglas, which has an amazing 1/10th of 1%. 1-to-1 mixing ratio gives a stable, molecular lattice structure to Acraglas Gel that will not crack, craze or sugar-out as will other 1-to-1 epoxies. Plus, this exclusive, 1-to-1 mix ratio, by volume, simplifies mixing and measuring small amounts accurately. Slightly longer pot life to give the user more time when doing the actual bedding. Longer cure time - The molecular structure of Acraglas Gel has been controlled so for the first few hours after the epoxy sets it remains slightly flexible, some of which flexibility is retained when fully cured. Readily blends with atomized aluminum, steel and stainless steel particles, thus making it possible for the user to create his own reinforced epoxy whenever such type epoxy is desired. Standard mix for optimum results is 1 part metal particles-to-3 parts mixed Acraglas Gel by volume. Can be dyed the same as Acraglas to match the characteristics of the gun stock being worked on. The above features of Acraglas Gel give you an idea of how completely we fulfilled your requests for a companion product for Acraglas ... The Acraglas Gel stay-in-one-spot feature ... sophisticated molecular structure ... slightly longer pot life and curing time ... the ability to mix in aluminum or steel, make this a product we are proud to offer to you and which, of course, we guarantee 100% as to quality of product, or your money back. USING GLASS FLOC Because of the characteristics of the lattice, molecular structure of Acraglas Gel, the advantages of glass floc are already incorporated in the finished epoxy so the addition of floc is not recommended or needed. ACRAGLAS GEL KIT - 2 fl. oz. (59 ml) Resin, 2 fl. oz. (59 ml) Hardener, 7/8 fl. oz. (26 ml) Release Agent, Measuring Spoon, re-useable Poly Mixing Dish, Mixing Stick, Brown Dye, Black Dye and Complete Instructions. ACRAGLAS GEL SHOP KIT - 8 fl. oz. (237 ml) Resin, 8 fl. oz. (237 ml) Hardener, 3 fl. oz. (89 ml) Release Agent, Measuring Spoon Set, 2 re-useable Poly Mixing Dishes, 25 Wide Mixing Sticks, 3 Paks Brown Dye, 3 Packets Black Dye, Instructions. Brownells Christmas , Issue:5X, Page:020 Big Book Catalog, Issue:68, Page:452 Law Enforcement / Police Store, Issue:02, Page:035 Mini-Catalogs, Issue:15, Page:007 New Product Supplement, Issue:581, Page:011 Sinclair, Issue:4X, Page:019

    HOT!
  • AR-15 ARMORER'S WRENCH BROWNELLS More Detail

    AR-15 ARMORER'S WRENCH BROWNELLS

    $59.99$59.99

    Brownells new AR-15 Armorer's Wrench works with either encapsulated or peg-style barrel nuts.  The long handle ends with a carbine buttstock wrench that features four teeth that ensure full engagement of all four notches in an M4-style receiver extension nut for easy removal and installation.   Also includes a 1/2" square drive opening for torque wrench application, 5/8" and 3/4" slots to fit receiver A2 receiver extensions and flash suppressors. AR-15, Issue:11, Page:084 Brownells Christmas , Issue:5X, Page:021 Big Book Catalog, Issue:68, Page:696

    HOT!
  • ROLL PIN HOLDERS BROWNELLS More Detail

    ROLL PIN HOLDERS BROWNELLS

    $14.99 - $49.99$14.99 - $49.99

    Hollow-Ended "Starter" Punches For Roll PinsHolds roll pins perfectly aligned for starting correctly. Especially good on the tiny, tough-to-grab ones, or those in tight places. 1/16" is notched to clear M16/AR-15 rear sight. 3.5mm excellent for holding the pin that retains the breech block on Sig handguns. Finish driving with roll pin punch. O/A in chart means "Overall". Available individually or as a set of 5. AR-15, Issue:11, Page:082 AR-15, Issue:11, Page:083 Brownells Christmas , Issue:2X, Page:019 Big Book Catalog, Issue:68, Page:082 Big Book Catalog, Issue:68, Page:083 Big Book Catalog, Issue:68, Page:466 Big Book Catalog, Issue:68, Page:515 Law Enforcement / Police Store, Issue:08, Page:056 Mini-Catalogs, Issue:05, Page:005 New Product Supplement, Issue:564, Page:001

    HOT!
  • AR-15/M16 UPPER RECEIVER ACTION BLOCK BROWNELLS More Detail

    AR-15/M16 UPPER RECEIVER ACTION BLOCK BROWNELLS

    $59.99 - $79.99$59.99 - $79.99

    Protect Receiver From Damage When Clamping Heavy-duty blocks allow you to firmly clamp AR-15/M16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. High pressure, solvent resistant, structural Rynite block and insert surround the entire upper receiver and support it inside and out to make rebarreling the AR-15/M16 an easy, one-man job. Lets you tightly clamp a carry handle receiver or flattop receiver in a large bench vise for barrel removal/installation. Torque generated while tightening the barrel nut is transmitted to the block and insert, not the receiver. Minimizes the possibility of damage to the barrel detent pin and receiver detent notch. Holds securely without marring the finish.  DO NOT USE ON BILLET UPPERS OR DAMAGE TO THE UPPER CAN RESULT. AR-15, Issue:11, Page:082 AR-15, Issue:11, Page:083 AR-15, Issue:11, Page:085 Brownells Christmas , Issue:4X, Page:016 Big Book Catalog, Issue:68, Page:082 Big Book Catalog, Issue:68, Page:083 Big Book Catalog, Issue:68, Page:086 Law Enforcement / Police Store, Issue:08, Page:054 Mini-Catalogs, Issue:05, Page:006 Sinclair, Issue:4S, Page:023

    HOT!
  • AR-15/M16 LOWER RECEIVER VISE BLOCK BROWNELLS More Detail

    AR-15/M16 LOWER RECEIVER VISE BLOCK BROWNELLS

    $49.99 - $79.99$49.99 - $79.99

    Protect Receiver From Damage When Clamping Heavy-duty blocks allow you to firmly clamp AR-15/M16 receiver halves in a vise without risk of crushing, twisting, or otherwise distorting them when applying vise pressure or torquing the barrel nut. Keeps your rifle secure for safe, effective cleaning, assembly, and repair. Unbreakable urethane vise block takes all the clamping force, so your expensive lower receiver won’t be damaged or distorted. Insert block into the magazine housing from the top or bottom, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Will not mar or scratch the finish. Fits tightly in most receivers and may require filing to fit others.  AR-15, Issue:11, Page:082 AR-15, Issue:11, Page:083 AR-15, Issue:11, Page:085 Brownells Christmas , Issue:4X, Page:016 Big Book Catalog, Issue:68, Page:082 Big Book Catalog, Issue:68, Page:083 Big Book Catalog, Issue:68, Page:086 Law Enforcement / Police Store, Issue:08, Page:054 Mini-Catalogs, Issue:05, Page:006 Sinclair, Issue:4S, Page:023

    HOT!
  • OXPHO-BLUE® BROWNELLS More Detail

    OXPHO-BLUE® BROWNELLS

    $9.99 - $44.99$9.99 - $44.99

    Finest Professional Cold Blue On The Market-Period! Originally developed for the occasional bluer who is not equipped to completely polish a gun prior to bluing, Oxpho Blue - because of its ease of application and remarkably superior results - has become a favorite of the professional gunsmith as well. With Oxpho-Blue, all you need do in most cases, is dampen a piece of cotton flannel and give the area a good rubbing. The chemical goes through the oil on the gun, removes thin rust and blues the steel underneath. No after-rust. For looks, the final finish was not intended to approach the beauty of the well-polished, hot-blued gun. It has developed, however, that in the hands of a careful craftsman, not only is the Oxpho-Blue finish beautiful, but it is also more durable and weather resistant than any other known chemical finish. Oxpho-Blue has other outstanding features worthy of note: Absolutely no after-rust. Phosphate-like surface forms under the blue. Rust removing qualities of the solution, making it unnecessary to remove mild rust in the usual manner. "Wetting" characteristics of the solution, giving it the ability to penetrate oil, dirt, etc., on the surface of the gun; blue the metal underneath; remove rust and dirt; leave the gun blued and ready for oiling. Beauty and high durability of the finish: vigorous rubbing with No. 0 steel wool is one of our favorite application methods - the more rubbing, the more brilliant it comes and, since abrasion is part of the process, normal contact from gun cases, brush and clothing won't wear your bluing. (Note: It is possible to get a surface so dense with Oxpho-Blue that water will puddle on it!) For Neighbor Kid and Mr. Average Sportsman, a beat-up gun can be made to look quite presentable by following this recent application technique; dampen a shoe shine cloth with Oxpho-Blue and blue the gun with a shoe shine motion - without taking too much trouble to remove old dirt, grease, rust, etc. This particular gimmick actually obsoletes all other kinds of bluing for retail sale, for any youngster can make his old man's gun look quite presentable. For gun club members, neighborhood shooters, etc., one bottle takes care of the lot. (The rub-on features works wonders on tools and instruments which have been blackened and show bright along the edges: just dampen a cloth with Oxpho-Blue, rub the bright areas briskly and they are as black as before, but tougher.) Big Book Catalog, Issue:68, Page:432

    HOT!
  • UNCLE MIKE'S SLING SWIVEL STUD KIT BROWNELLS More Detail

    UNCLE MIKE'S SLING SWIVEL STUD KIT BROWNELLS

    $8.99 - $89.99$8.99 - $89.99

    Every Swivel Stud & Part You NeedSaves money and "scrounge-time" by putting all the most needed swivel stud parts at your fingertips. Uncle Mike's is the most popular brand on the market, so you'll have what most of your customer's guns need. Big Book Catalog, Issue:68, Page:255 Big Book Catalog, Issue:68, Page:256 New Product Supplement, Issue:565, Page:001

    HOT!
  • SIGHT PRO MGW More Detail

    SIGHT PRO MGW

    $17.99 - $329.99$17.99 - $329.99

    Main Sight Tool- A must have for Gunsmiths and Armorers.  The Sight Pro uses a unique clamping shoe design, plus 4 slide support pads and a white nylon spacer block to lock the slide in place while adjusting or replacing sights.  Two cuts on the lower section of the tool allow you to lock it in a bench vise. Shoes do not come with Sight Tool. Degree Block Assembly- Made for Glock and HK angled sight, this 30 degree block assembly allows you to easily adjust or replace the angled sights, preventing marring or damage that might occur if you used the straight wall press. Slide Shoe- Unique clamping shoes are firearm specific.  These work with the MGW Sight Pro. Square Block Assembly- Square Block Assembly-Replacement assembly for worn or damaged square blocks for the Sight Pro. 1911, Issue:11, Page:063 Brownells Christmas , Issue:5X, Page:020 Big Book Catalog, Issue:68, Page:158 Big Book Catalog, Issue:68, Page:518

    HOT!
  • SEMI-AUTO SIGHT MOVER MGW More Detail

    SEMI-AUTO SIGHT MOVER MGW

    $99.99 - $139.99$99.99 - $139.99

    Adjusts, Removes & Installs Sights Without Damage Safely moves fixed sights right or left in their dovetails without deforming slide or sight. Specifically designed for use with factory and aftermarket Tritium night sights, which are too fragile for the traditional hammer-and-punch sight installation method; works equally well with iron sights. Thumbscrew securely locks the slide so it’s fully supported in the rigid, machined aluminum body. Separate slots in the screw mechanism engage the sight and firmly, yet gently, concentrate screw force to loosen sights from even extremely tight dovetails. Hardened steel handle provides plenty of leverage, while self-lubricating, oil-impregnated Oilite® bronze bearings and extra-fine threads ensure smooth, precise movement. Beretta/Glock fit rear sights only. Glock Flat-Side fits aftermarket rear sights with straight, non-sloped sides for standard- and large-frame Glock pistols. SIG fits rear sights on all SIGs except SIG-PRO. Smith & Wesson M&P fits both and front and rear sights; will not fit Pro models with 5" barrel. Will not fit the Shield model. Separate Shield model available. Springfield XD fits both front and rear sights on all XD models except front sight on 5" barrel Tactical model. These do not work on the front sights of Pro/Tactical or sub compact XD/XDM model front sights. Will not work on XD-S slides. 1911 will not work with most Kimber slide/sight combinations. Only works on rear sights. Not for installing or adjusting front sights. Sig fits P220, P225, P226, P228, P239 only. Does not fit Sig Pro series. Does not fit P220 Elite Shadow. Does not work on adjustable sights. Glock 42 Adapter Kit fits the MGW309 and MGW309S Sight Movers to fit the new compact Glock 42 pistols. The adapter kit includes the adapter spacer and the shoe. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. 1911, Issue:11, Page:061 Big Book Catalog, Issue:68, Page:156 Big Book Catalog, Issue:68, Page:515 Big Book Catalog, Issue:68, Page:518 Law Enforcement / Police Store, Issue:08, Page:056 Mini-Catalogs, Issue:05, Page:012 Personal Protection, Issue:01, Page:052

    HOT!
  • AR-15/M16 CRITICAL TOOLS KIT BROWNELLS More Detail

    AR-15/M16 CRITICAL TOOLS KIT BROWNELLS

    $109.99$109.99

    Essential Tools Needed To Build, Customize Or Rebarrel Any AR Convenient kit has essential tools you need to build, repair, or modify a custom AR-15/M16 rifle - without duplicating the common tools you already have. Includes our top-quality Brownells Armorer's Wrench, necessary for installation and removal of any barrel with either encapsulated or peg-style barrel nuts. Also has wrenches for flash hiders, M4-style castle nut, and A2 buffer tube nut. Lower Receiver Vise Block snaps into the magwell just like a magazine to provide a secure clamping surface for a vise without risk of damaging or distorting the receiver. Heavy-duty clamshell Upper Receiver Action Block lets you clamp the upper in a vise to remove or install the barrel or perform other work without crushing, twisting, or damaging it. Fits carry handle and flattop receivers. Two pivot pin tools: one retracts the spring-loaded detent, so you can remove the pivot pin completely from the receiver; the other retains the detent and spring while installing the pivot pin. Bolt Catch Pin Punch has a flat handle that clears the left side of the magwell for easy removal of the bolt catch pivot pin by driving it to the rear.  DO NOT USE ON BILLET UPPERS OR DAMAGE TO THE UPPER CAN RESULT. AR-15, Issue:11, Page:081 Brownells Christmas , Issue:4X, Page:016 Big Book Catalog, Issue:68, Page:081 Personal Protection, Issue:01, Page:052

    HOT!
  • MAGNA-TIP SUPER SETS™ BROWNELLS More Detail

    MAGNA-TIP SUPER SETS™ BROWNELLS

    $69.99 - $129.99$69.99 - $129.99

    Screwdrivers to Precisely Fit Virtually Any Gun Screw Slot, 44 Custom Bits, 9 Shank SizesEvery gunsmith knows no two screw slots are ever exactly the same. Because so many factories use outside vendors for screws, slot sizes can vary, even within the same model of gun. If you want to be professional about your work, you custom grind each bit to the correct size, a frustrating and time-consuming task without a Super Set. The Super Set comes in graduated 22-bit, 44-bit, and 58-bit configurations, so you’ll always have a screwdriver blade that precisely fits the size and width of virtually any screw slot. You get flat blades in 9 different widths from .120" to .360", each with four to six blade thicknesses from .030" through .070" in .005"or .010" increments. Each 1½" long bit is marked with its blade width and relative thickness number, 3 for thinnest, 4 for next thicker, etc.   The 22 Bit Starter Super Set eases you into the powerful Super-Set concept with the 22 straight bits (#120-3, #120-5, #150-4, #150-6, #180-3, #180-5, #210-4, #210-6, #240-3, #240-5, #240-7, #270-4, #270-6, #300-3, #300-5, #300-7, #340-4, #340-6, #340-8 ,#360-3, #360-5, #360-7), your choice of one handle, and the heavy duty box, and tray. When you’re ready to expand your set, the Super Set Add-On Pak lets you upgrade it to the same configuration as the 44-bit Super Set.The 44 Bit Super Set Plus has all 44 slotted screws below (#120-3, #120-4, #120-5, #120-6, #150-3, #150-4, #150-5, #150-6, #180-3, #180-4, #180-5, #180-6, #210-3, #210-4, #210-5, #210-6, #210-7, #240-3, #240-4, #240-5, #240-6, #240-7, #270-3, #270-4, #270-5, #270-6, #270-7, #300-3, #300-4, #300-5, #300-6, #300-7, #340-3, #340-4, #340-5, #340-6, #340-7, #340-8, #360-3, #360-4, #360-5, #360-6, #360-7, #360-8), one handle of your choice, a Stubby Handle (just the ticket for working in tight places), and the heavy duty box and tray.The 58 Bit Master Super Set Plus adds 10 hex-head bits (#185-9, #185-10, #185-00, #185-0, #185-1, #185-2, #185-3, #185-4, #185-5, #185-6), 3 Phillips-head bits (#440-1, #440-2, #440-0), and a 1/8" square bit for Remington buttplates to the contents of the 44 Bit Super Set Plus. It's the most incredible screwdriver system you will ever use! Brownells Christmas , Issue:5X, Page:020 Big Book Catalog, Issue:68, Page:470 Law Enforcement / Police Store, Issue:08, Page:056 Mini-Catalogs, Issue:05, Page:004 New Product Supplement, Issue:581, Page:010 Personal Protection, Issue:01, Page:051

    HOT!
  • HEADSPACE GAUGES FORSTER More Detail

    HEADSPACE GAUGES FORSTER

    $28.99 - $35.99$28.99 - $35.99

    Absolutely Essential For Accurate, Safe, Chamber Work The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. AR-15, Issue:11, Page:087 Big Book Catalog, Issue:68, Page:088 Big Book Catalog, Issue:68, Page:495 Law Enforcement / Police Store, Issue:01, Page:015 New Product Supplement, Issue:602, Page:022

    HOT!
  • AR-15 ARMORER'S PUNCH SET OBSIDIAN ARMS More Detail

    AR-15 ARMORER'S PUNCH SET OBSIDIAN ARMS

    $45.00$45.00

    The AR-15 Armor Punch Set contains all punches needed to assemble an AR-15 Lower Receiver.  They are made from 4140 alloy steel, heat treated, and QPQ finished.  Includes: 3 starter punches, 3 roll pin punches, 1 flat punch, 1 double sided delrin plastic punch. AR-15, Issue:11, Page:086 Brownells Christmas , Issue:5X, Page:020 Big Book Catalog, Issue:68, Page:087

    HOT!
  • MATCH RIFLE HEADSPACE GAUGES FORSTER More Detail

    MATCH RIFLE HEADSPACE GAUGES FORSTER

    $28.99 - $249.99$28.99 - $249.99

    In .001" Increments For Precise Measurement Of "Match Grade" Chambers Lets you know the exact headspace dimension on any rifle chambered in .308 Win., .223, or .22LR. Covers every size chamber all the way from Go to Field, in .001" increments. Perfect for match shooters, armorers, or sportsmen looking for the most accurate, and reliable way to track locking lug and chamber wear on high quality, match grade barrels. Each gauge is precision-ground to the exact tolerance listed. MIXING AND MATCHING BRANDS OF HEADSPCAE GAUGES Don't do it !! That's the short answer, here's why. It boils down to tolerance stacking. Each Headspace Gauge manufacturer works within a range specified by SAAMI. Manufacturer "A" may work at the high end of the range while Manufacturer "B's" gauges are in the middle of the tolerance range. Mixing the two could give an inaccuratereading. By sticking with one brand within a particular caliber, you will eliminate a variable. If you have a Forster, .308 GO gauge, get a Forster, .308 NO GO. Use Clymer with Clymer and Manson Precision with Manson Precision, etc. You can use any brand of headspace gauge with any other brand of chambering reamer. e.g. Forster Headspace Gauges with Clymer Reamers, Manson Precision Gauges with JGS Reamers, etc. AR-15, Issue:11, Page:087 Big Book Catalog, Issue:68, Page:088 Big Book Catalog, Issue:68, Page:495 Law Enforcement / Police Store, Issue:01, Page:015

    HOT!
  • ACRAGLAS® BROWNELLS More Detail

    ACRAGLAS® BROWNELLS

    $24.99 - $199.99$24.99 - $199.99

    Accurize With Acraglas, Now Includes Brown & Black Dyes, Easy-To-Use Kit, Strengthens Stock, Acid & Waterproof, Simplifies Inletting The word ACRAGLAS has proven, during the many years it has been used by shooters, to be a true and fair product description. For Acraglas, as its name implies, is an accurizing material designed for the exclusive purpose of making a rifle shoot more accurately. Granted, it is a superior bedding compound used and sold as such by dealers, stock manufacturers and gunsmiths - but the fact remains: its prime purpose is to accurize a rifle. THE AMERICAN RIFLEMAN To quote L.R.W. in the American Rifleman Dope Bag, “Acraglas will be found an excellent preparation to correct poor bedding and the revitalized rifle should respond with considerably better accuracy.” “It’s a boon for the lazy, too, because if you are inletting a stock blank you simply cut out too much wood all the way around, gob the wood well with Acraglas, put the metal in (properly treated with release agent coming with the kit) and set aside for about 24 hours. When the metal is removed, the result is perfect bedding for the action - good, strong, and reliable bedding it is, too.” PROVEN IN THE FIELD As the manufacturers of Acraglas, we cannot help but be very proud, too, of the many individual shooters and teams who have won big bore regional and Perry matches with Acraglassed guns ... and of the hunters who have sent us “before and after” targets made when sighting in their game rifles after using Acraglas. The basic materials used in Acraglas are those developed for the aircraft industry. These we have adapted to gun work. Some of the many unusual features of Acraglas are:   Acraglas shrinks less than 1⁄10th of 1% when hardening. This is very important to you as a shooter, for the tighter your bedding job, the better the job. It must be remembered, too, that many of the plastics will shrink more than 5% when hardening, thus canceling their true values as accurizing materials. So perfectly does Acraglas fit your barrel and action that any stamping marks in the steel will also be there in the Acraglas ... impossible to “Bed” any closer. Acraglas actually strengthens your stock because of its own great strength and resistance to breakage or warpage! Acraglas is acid proof, waterproof, has superior insulating qualities, resists alkalies and will not rot or deteriorate. It is quite well known that many of the so-called “plastic glasses” do deteriorate and products made from them are only guaranteed 5 years. Acraglas is highly resistant to impact and will not dent. Should it ever be damaged, or if an improper job is done the first time, it can easily be corrected or mended by using the same materials as in the Kit. Thus, it makes the perfect recoil shoulder. Unlike paints or air drying plastics, Acraglas hardens by chemical action. So, a hard surface indicates a hard interior ready for finishing. The mixture becomes hot before reaching setting temperature. It then “kicks over” and begins to harden, reaching full hardness in 48 hours, altho’ it can be worked, sanded and finished before then. Acraglas has a shelf life of over 5 years! Acraglas has been so compounded by our research engineers that you have ample time to properly seat the barreled action in the inletted stock before it starts to harden. Therefore, when using it you do not need to become nervous and rushed, but can take your time and do the First Class Job you are capable of doing. Being a superior bedding compound, you get a double- barreled benefit when using Acraglas: - An excellent bedding job that does not carry the stigma of “plastic bedding” and you have concentrated your real efforts on accurizing your gun - all at the same time! For your own enlightenment you should check among your shooting friends and note how many are proud of their guns being Accurized with Acraglas. Acraglas completely seals the inletted side of the gun stock against all moisture, gun oils, solvents and sprays. Moisture being absorbed by the stock can cause the finest woods to warp or twist, forcing the gun to shoot different groups on different days. Oils and solvents will eventually make the most beautiful of woods dirty looking where allowed to soak in and, in rare cases, actually ruin the wood. Acraglas has another feature that is strictly a side benefit - but, one our gunsmith customers have found out for themselves and use extensively. The bonding strength of Acraglas is phenomenal - will actually stick “anything to anything” (except certain poly-plastics). The letters in our files make one shake his head in wonder. It seems our gunsmiths have repaired everything from false teeth, toilet bowls, pipes, chairs, cribs, cars, radios, TV’s, skis, sleds, tables, flintlock rifles, caplock rifles and modern gun stocks without number. What it amounts to is this: You name something that has been busted and one of them has undoubtedly used Acraglas to fix it! But, we play this down. We are not in the glue business. There are a jillion glues but only one Acraglas! RELEASE AGENT Our traditional Release Agent and our easy-to-ship, Non-Flammable Release Agent selectively lets Acraglas bond to the stock but not to the barreled action. Both products present nearly indentical physical characteristics, and are applied in exactly the same manner with no noticeable difference in dry time. Both form a smooth, vinyl-like coating between the bedding compound and metal. Non-Flammable Release Agent is a non-flammable, non-hazardous formula that can be transported by air, immediately upon request, safely and legally within and outside the Continental U. S., so there’s no more waiting for ground shipments to arrive when you need an Acraglas kit or extra release agent in a hurry. WHO USES ACRAGLAS AND WHY STOCK MANUFACTURERS - For special custom accurizing jobs and for resale to dealer and retail accounts. PROFESSIONAL STOCKMAKERS - For obtaining skin-tight bedding around receivers, at the chamber on the barrel and at the forend tip on certain jobs. GUNSMITHS - For the complete gamut of stock work - the complete inletting job, the accurizing of an erratic shooting gun and for the super-duper stock where the same techniques are used as by the fulltime stockmaker. GUN HOBBYISTS AND BUFFS - To accurize their present guns or to bed and accurize guns they are stocking; also, to simplify bedding barreled actions into inletted stocks purchased from stock manufacturers ... a great boon for the man who likes to do the job himself - and wants the best results. INSTRUCTIONS AND COLOR Acraglas in itself is amber-clear. To make it match your stock - black or brown - we furnish two special, acrylic dyes with each Kit. With them you can color the Acraglas mix to blend properly with the color of your individual stock - wood or synthetic. The brown dye nicely matches “normal” walnut but if your stock is exceptionally light walnut, or made of maple, myrtle, cherry, etc., you may want to leave out the dye for a closer match. Just remember, the color you see in the cup will darken somewhat when the Acraglas is in the stock. But, you don’t have to match the color, many shooters like to create contrast at the joining of barrel and stock to add a point of distinction to their gun and make sure others know they’ve taken the time to do a first-rate glass bedding job. Complete, easy-to-follow Instructions are packaged with each Kit. These tell you how to mix and use. FOLLOW THEM CAREFULLY. We guarantee Acraglas 100%. ACRAGLAS KIT - 2 fl. oz. (59 ml) Resin, 7⁄8 fl. oz. (26 ml) Hardener, 7⁄8 fl. oz. (26 ml) Release Agent, Floc, 2 Mixing Cups, Mixing Stick, Brown Dye, Black Dye enough to bed 2 Rifles. Complete Instructions. ACRAGLAS SHOP KIT - 28 fl. oz. (828 ml) Resin, 7 fl. oz. (207 ml) Hardener, 3 fl. oz. (89 ml) Release Agent, 8 oz. (227g) Floc, 24 3 oz. capacity Mixing Cups, 50 Mixing Sticks, 5 Packets Brown Dye, 5 Paks Black Dye and Instructions. Brownells Christmas , Issue:5X, Page:020 Big Book Catalog, Issue:68, Page:451 Mini-Catalogs, Issue:15, Page:007 New Product Supplement, Issue:564, Page:001

    HOT!
  • FORMULA 44/40® INSTANT GUN BLUE BROWNELLS More Detail

    FORMULA 44/40® INSTANT GUN BLUE BROWNELLS

    $10.99 - $152.99$10.99 - $152.99

    Fast, Easy, Wipe-On, Wipe-Off Application Original High-Speed Formula Deep Penetrating 44/40 has long been one of the cold-blue standards in the industry and we here at Brownells are delighted to have purchased the original, high-speed formula and the legendary name and brought it back to its many fans. 44/40's familiar bluing action is almost magic; simply dampen a patch with 44/40, wipe it on and wipe it off immediately with a dry one. The coloring action happens instantly and the color penetrates deep into the metal for a long-lasting finish. There's no need to soak or rub for long periods. Surface preparation's easy, too; for scratches, just clean and degrease as you normally would and apply 44/40. As a blue for external/internal parts and pieces, the procedure is just as easy. Bring the surface to the finish you want, clean it and wipe-on, wipe-off. 44/40 will do the job beautifully. And, it's great for other jobs around the shop, too. The quick action and dark color makes 44/40 an excellent substitute for traditional layout fluids. The steel is darkened quickly so your layout lines will show up. There's no surface buildup of "paint" to foul up dimension readings and nothing to peel or flake off. Coat lathe and cutting tools before sharpening so you can see where you're grinding. Use 44/40 to age brass and copper in restorations, or just to reduce glare and reflection. You can literally do thousands of jobs with 44/40! You need 44/40 on your bench; the highly active formulation makes sure that you're going to be able to expertly touch-up virtually any non-stainless gun steel and professionally blend the repair into the original finish. For the gun shop or store, there's the proven, "sells-itself" display. It comes with a dozen, 2 ounce bottles of 44/40 in a brightly labeled, attention-getting, countertop display tray, along with a test bottle and a supply of nails so your customers can dip into 44/40 to see just how quick and easy it really is. Plus, you get cleaning patches for the "wipe-off" part of the procedure. *Requires $17.00 Per Carton Hazardous Materials Surcharge. Cannot ship outside Continental United States. Ship UPS Ground only within U.S. Big Book Catalog, Issue:68, Page:432 Cowboy Action, Issue:03, Page:035 Law Enforcement / Police Store, Issue:07, Page:054 Mini-Catalogs, Issue:05, Page:010 New Product Supplement, Issue:581, Page:014

    HOT!
  • EXTRA-LARGE BENCH BLOCKS BROWNELLS More Detail

    EXTRA-LARGE BENCH BLOCKS BROWNELLS

    $19.99$19.99

    Large, 4" Diameter, Useable Surface Will Not Embed Or MarExtra size and weight helps keep these blocks where you put them and the big face eliminates much of the “balancing act” when you’re driving pins. Cannot mar even the most ­highly polished surface. Two different models. Green - For rifles and shotguns; drilled with four through holes for easier pin removal and disassembly. Convenient, center “V” holds cylindrically shaped parts steady so they won’t roll. Blue - For revolvers and pistols. Larger through holes and partial “V” holds pistol barrels for easier link pin installation and removal. Can be drilled or modified with hand tools; will not melt when machined. 1911, Issue:11, Page:053 AR-15, Issue:11, Page:084 Brownells Christmas , Issue:2X, Page:018 Big Book Catalog, Issue:68, Page:085 Big Book Catalog, Issue:68, Page:150 Big Book Catalog, Issue:68, Page:463 Big Book Catalog, Issue:68, Page:502 Big Book Catalog, Issue:68, Page:515 Law Enforcement / Police Store, Issue:08, Page:056 Law Enforcement / Police Store, Issue:08, Page:057 Mini-Catalogs, Issue:05, Page:005 Sinclair, Issue:5B, Page:2

    HOT!
  • GO/NO-GO GAUGE SETS CLYMER More Detail

    GO/NO-GO GAUGE SETS CLYMER

    $58.00 - $90.00$58.00 - $90.00

    Headspace Gauge Sets In Popular Rifle & Pistol CalibersConvenient kits contain Go and No-Go gauges for accurately checking chamber length to make sure it meets SAAMI specs. These gauges are essential tools for ensuring a tight, accurate, safe chamber when chambering a new barrel. Always have a set on hand to check for correct headspace before buying or firing a new gun. Comes in a handy, durable plastic carrying case. 1911, Issue:11, Page:058 AR-15, Issue:11, Page:087 Big Book Catalog, Issue:68, Page:087 Big Book Catalog, Issue:68, Page:153 Big Book Catalog, Issue:68, Page:495 New Product Supplement, Issue:621, Page:017

    HOT!
  • OXYNATE® NO. 7 BROWNELLS More Detail

    OXYNATE® NO. 7 BROWNELLS

    $0.99 - $1,249.99$0.99 - $1,249.99

    HOT CHEMICAL BLUING COMPOUND MEETS Mil Spec C13924BAM1, Class 1, Grade A Finest Professional Gunsmith-Developed, Hot Bluing Salts Available on the Market TodayOXYNATE NO. 7 has, for more than 55 years, been the popular bluing salts for the professional gun trade. For quantity work (one to a dozen guns a week or month) the cost per gun is extremely low. Oxynate No. 7 is manufactured by one of the countrys chief producers of manufacturers chemicals and sold by us to the gun trade by exclusive license. This is mentioned so that youll appreciate the vast research laboratories available to our users of Oxynate No. 7- and that you are using the best gun blue modern science and research can produce. Our copyrighted Instructions are, we feel, the most complete offered to the trade. Every step, every complication, every question the gun bluer can encounter is detailed in this booklet. The answers and suggestions are not from any one individual but are those of several thousand gun men who have used Oxynate No. 7 successfully during the past 55+ years. Ask for a copy today. Note: Requires Additional Hazardous Materials Surcharge. Please call for freight charges. Big Book Catalog, Issue:68, Page:427

    HOT!
  • 1911 LUG FITTING KIT BROWNELLS More Detail

    1911 LUG FITTING KIT BROWNELLS

    $20.99 - $179.99$20.99 - $179.99

    Helps You Fit The Standing Lugs On Oversized BarrelsThree essential tools work together to help you successfully fit oversized barrels. The Barrel Holder locks the barrel in the slide to let you cut the excess material on the lugs with the included, carbide Barrel Lug Cutters. Plus, the Slide Pusher holds the slide forward to put a consistent pressure on the barrel while cutting. Comes in a convenient case. 1911, Issue:11, Page:055 Brownells Christmas , Issue:5X, Page:021 Big Book Catalog, Issue:68, Page:152 New Product Supplement, Issue:572, Page:003

    HOT!
  • SAF-T-TRAINERS DUMMY ROUNDS PRECISION GUN SPECIALTIES More Detail

    SAF-T-TRAINERS DUMMY ROUNDS PRECISION GUN SPECIALTIES

    $5.99 - $34.99$5.99 - $34.99

    Brightly Colored "Dummies" For Training Exercises Brightly colored plastic and a different “feel” makes sure you won’t confuse these for live rounds. Popular with many departments and agencies for use in Immediate Action training for just that reason. These do not duplicate weight and balance of loaded rounds or function-testing dummies. AR-15, Issue:11, Page:075 Big Book Catalog, Issue:68, Page:076 Big Book Catalog, Issue:68, Page:406 Law Enforcement / Police Store, Issue:08, Page:049 New Product Supplement, Issue:593, Page:021

    HOT!
  • HEADSPACE GAUGES - NO-GO CLYMER More Detail

    HEADSPACE GAUGES - NO-GO CLYMER

    $29.00 - $45.00$29.00 - $45.00

    Absolutely Essential For Accurate, Safe, Chamber Work The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Gauges are etched with “Go” or “No-Go” and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. AR-15, Issue:11, Page:087 Big Book Catalog, Issue:68, Page:088 Big Book Catalog, Issue:68, Page:495 Law Enforcement / Police Store, Issue:08, Page:054 New Product Supplement, Issue:611, Page:017

    HOT!
  • AR-15/M16 ARMORER'S WRENCH MAGPUL More Detail

    AR-15/M16 ARMORER'S WRENCH MAGPUL

    $75.95$75.95

    American-Made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts.  Fits standard sized flash hiders.  Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP Plates.  Two hammer faces.  Works with 1/2" torque wrench.  Relevant torque specs included on wrench for quick reference.  Convenient bottle opener for refreshments arfter the build is complete(fits both Metric and SAE bottle caps). AR-15, Issue:11, Page:083 Big Book Catalog, Issue:68, Page:083 Mini-Catalogs, Issue:13, Page:005

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!