• DURACOAT PAINTS LAUER CUSTOM WEAPONRY More Detail

    DURACOAT PAINTS LAUER CUSTOM WEAPONRY

    $19.92 - $34.99$19.92 - $34.99

    Provides a protective paint that won’t chip, crack, or flake; works great on any material. Hardener and paint form a chemical bond for durability and elasticity. Airbrush application gives a smooth finish. Dries in 10 minutes and fully cures overnight; speed cure in the oven at 110° F for 1 hour. The HARDENER is included with each color. The 4 oz. finishes 1-4 firearms; and the 8 oz. finishes 4-8 firearms depending on application and size of firearms. View the Duracoat Painting System. Note: Duracoat Pink Lady requires base coat of DuraCoat 21-White available by special order. Big Book Catalog, Issue:68, Page:436

    HOT!
  • REMINGTON 700 RIFLE ACTION WRENCH & HEAD BROWNELLS More Detail

    REMINGTON 700 RIFLE ACTION WRENCH & HEAD BROWNELLS

    $74.99 - $139.99$74.99 - $139.99

    The only commercially available action wrench system that surrounds and supports the receiver ring and recoil lug to distribute potentially damaging torque forces equally. The solid steel base has a unique, machined relief to clear the recoil lug on most Mauser-type bolt action rifles and, the individual, bolt-on Heads are machined to provide an exact fit around and against the receiver ring or barrel nut for each of the firearm models listed. Together, they support the receiver in a ring of steel and greatly increase the amount of surface gripping area to totally eliminate twisted bolt ways or damaged, ruined receivers. This is the most advanced, complete, professional-quality, Action Wrench System. With it, you can prevent expensive receiver damage on MOST popular rifle actions, including military models, plus, models for selected handguns. Two-piece head completely encircles cylindrical style action for 100% surface contact. Upper Head indexes on the forward guard screw and positions recoil lug properly during barrel installation. Includes both heads and longer bolts. Fits all Remington actions with receiver diameter of 1.355". Double-angle design accepts factory lug or Tubb and Shilen tapered design. Big Book Catalog, Issue:68, Page:491 Big Book Catalog, Issue:68, Page:503 New Product Supplement, Issue:581, Page:012

    HOT!
  • BRASS PILOTS BROWNELLS More Detail

    BRASS PILOTS BROWNELLS

    $25.99 - $35.99$25.99 - $35.99

    Centers Cutters For Accurate WorkHardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.Select one of the following for other rifle/handgun muzzles, cylinder facing & chamfering tools. Steel One Caliber Set 45 Cutter & Steel Pilot Brass One Caliber Set 45 Cutter & Brass Pilot 90 Cutter & Steel Pilot Steel Pilot Only 90 Cutter & Brass Pilot Chamfering & Facing Combo Sets Big Book Catalog, Issue:68, Page:496 Big Book Catalog, Issue:68, Page:497 New Product Supplement, Issue:572, Page:004

    HOT!
  • STEEL BED KIT BROWNELLS More Detail

    STEEL BED KIT BROWNELLS

    $44.95 - $309.99$44.95 - $309.99

    Stainless Steel-Filled Epoxy, Rifle-Bedding Compound What is STEEL BED? Simply the most-advanced, toughest- ever bedding and stabilizing, steel-bearing, epoxy compound for wood and fiberglass gun stocks. Designed specifically for GUNS, to give the incredible impact resistance that’s possible only by surrounding the action with a layer of solid, never-rust stainless steel and the skin-tight, epoxy-matrix fit so vital for superb accuracy. Through a unique blending process, there’s actually more stainless steel (by weight) than epoxy in STEEL BED - 2½ times more steel than in competitive products. STEEL BED shrinks less than 1⁄10 of 1% and won’t compress, crumble or “sugar” under the most punishing magnum or semi- auto recoil. Fiberglass stockmakers use it to support the recoil lugs of their lightweight mountain rifles; military armorers and civilian shooters use it under the most grueling conditions without breakdown or deterioration. We tested and abused STEEL BED every way possible and, once we were convinced of its amazing superiority, test samples went to armorers, gunsmiths and competitive shooters. They tested STEEL BED in “real life” situations - it met and exceeded every demand made of it! No cracking, crazing or “sugaring”. Group sizes got smaller. All the guns tested - semi-auto, 1000 yard, bolt-action match rifles, benchrest guns and hunting rifles - performed better after bedding with STEEL BED. Because of the extremely high stainless steel content, it’s tough to dye STEEL BED to match wood tones but, our latest dyes are so powerful that you can get a useable brown color for wood stocks and a very good black for synthetics. Another choice is to paint the STEEL BED along with the synthetic stock. If you want the best possible color match on a wood stock, you can use STEEL BED for recoil lugs and pillar bedding and ACRAGLAS® or ACRAGLAS GEL® (which are more easily dyed) in those places where the bedding will be visible. STEEL BED really is the ultimate, steel-bearing bedding compound. Besides being incredibly strong and tough, it’s very easy to use. The mixing ratio is a simple, 1-part Resin to 1-part Hardener, by volume, and the creamy, no-run texture means STEEL BED will stay where it’s put. STEEL BED KIT - (1) 1½ fl. oz. (44 ml) net contents jar Resin; (1) 1½ fl. oz. (44 ml) net contents jar Hardener; (1) 7/8 oz. (26 ml) net contents jar Acraglas Non-Flammable™ Release Agent; (1) Measuring Spoon, (1) Re-useable Poly Mixing Dish, (2) Mixing Sticks (1) Brown Dye Pak, (1) Black Dye Pak and (2) Release Agent Applicators; Instructions. STEEL BED SHOP KIT - (1) 8 fl. oz. (237 ml) net contents jar Resin; (1) 8 fl. oz. (237 ml) net contents jar Hardener; (1) 3 oz. (88.7 ml) net contents jar Acraglas Non-Flammable™ Release Agent; (1) Measuring Spoon Set, (5) Re-useable Poly Mixing Dishes, (25) Mixing Sticks (5) Brown Dye Paks, (5) Black Dye and (25) Release Agent Applicators; Instructions. Big Book Catalog, Issue:68, Page:453 Big Book Catalog, Issue:68, Page:492 Law Enforcement / Police Store, Issue:03, Page:047 New Product Supplement, Issue:581, Page:011

    HOT!
  • MARINE-TEX MARINE-TEX More Detail

    MARINE-TEX MARINE-TEX

    $15.99 - $86.99$15.99 - $86.99

    Handy Size, Ready To Mix & UseHigh strength epoxy plugs holes, seals cracks and makes repairs in wood, aluminum, and steel. Putty-like consistency, will not run or drip. Impervious to solvents. Virtually no shrinkage or expansion. Big Book Catalog, Issue:68, Page:454 New Product Supplement, Issue:602, Page:023

    HOT!
  • HT-1 HEAT TREAT OVEN AND COLOR CASE HARDENING KIT EVENHEAT KILN INC. More Detail

    HT-1 HEAT TREAT OVEN AND COLOR CASE HARDENING KIT EVENHEAT KILN INC.

    $55.00 - $1,899.99$55.00 - $1,899.99

    Programmable For Hands-Off Heat-Treating & Color Case-Hardening Programmable oven makes easy work of any heat-treating job, including color-case hardening. Compact chamber is the right size for receivers, bottom metal, buttplates, knife blades, custom screws, and other small parts. Numerical control with extra-large keypad lets you create and store up to 12 repeatable custom programs for consistent results. You determine the temperature ranges, hold-time, alarm set-points, and make easy on-the-fly adjustments to fine-tune your program. Even allows you to pre-program the start time to take advantage of variable electric rates. Backlit, four character display provides accurate real-time temperature/time monitoring. Cool-touch door handle allows comfortable operation when the oven is hot. Innovative safety interrupt automatically removes power from all heating elements when the door opens and reapplies power after it closes. Built with a durable, corrosion-resistant stainless steel outer shell and a firebrick lining for maximum heating efficiency. Includes Type-K thermocouples for quick and reliable temperature control. Loud Alarm- Cut through your shop noise with the Loud Alarm.  The Loud Alarm sounds at 80+ decibels, and alerts the user when the heat treat process temperature and hold has been reached, and more importantly, when it's over and it's time to quench.  For ovens with serial numbers over 107120. Big Book Catalog, Issue:68, Page:419

    HOT!
  • PLUNGER TUBE STAKING TOOL GUN RUNNERS More Detail

    PLUNGER TUBE STAKING TOOL GUN RUNNERS

    $32.99$32.99

    Easy, Two-Hand Operation Gives Tight CrimpCombination tool clamps plunger tube firmly and accurately in place, helps prevent expensive damage to the frame or the plunger tube. Locking bar is milled for a precise fit to both 5/32", Mil-Spec, and 3/16", oversize tubes. Spot faced holes along the back of the locking bar hold tool in correct alignment for a tight crimp. Hardened point gives years of service. 1911, Issue:11, Page:060 Big Book Catalog, Issue:68, Page:155 New Product Supplement, Issue:541, Page:000

    HOT!
  • FIREARMS RECORD BOOKS BROWNELLS More Detail

    FIREARMS RECORD BOOKS BROWNELLS

    $2.99 - $24.99$2.99 - $24.99

    Revised To Include The Latest Information About NICSRequired by every business that buys or sells firearms. And, now updated with the latest information about the National Instant Criminal Background Check System (NICS). Describes specifically how to enroll in and comply with NICS, plus gives a correct, permanent record of all purchases and sales of firearms as required under the Gun Control Act of 1968. The format used has been approved by the Bureau of Alcohol, Tobacco and Firearms of the U.S. Department of the Treasury. The book contains 48 pages; has 440 entry lines; and a reprint of ATF P 5300.15 (1/89) detailing FFL rules and regulations; plus a guide, with examples, to filling out the record entries correctly. Punched for any 2 or 3 hole, or post binder. Big Book Catalog, Issue:68, Page:527 Law Enforcement / Police Store, Issue:07, Page:060 New Product Supplement, Issue:573, Page:006

    HOT!
  • REMINGTON BOLT MAINTENANCE STORAGE CASE UFP TECHNOLOGIES More Detail

    REMINGTON BOLT MAINTENANCE STORAGE CASE UFP TECHNOLOGIES

    $29.99 - $119.99$29.99 - $119.99

    Cleaning, maintaining and changing parts on the bolt of your Remington bolt action rifle has never been easier. This case will store all the tools needed to remove the firing pin assembly, replace the firing pin assembly, remove and/or change ejectors and springs and otherwise maintain your Remington Bolt. This case features storage areas for our Remington Firing Pin Removal Tool (RFPT), Remington Ejector Compressor Tool (22-550), Remington Mainspring Tool (22-500) and our Remington Bolt Maintenance Bench Block (22-525). Store all these tools together in one convenient location and save the time and aggravation of searching your drawers and toolboxes. Purchase the Remington Bolt Maintenance Kit with all four tools and storage case and save $15.00 over buying each of the items separately. **Image is shown with tools in the storage case for illustrative purposes only. Tools are not included. Sinclair, Issue:5B, Page:024 Sinclair, Issue:5B, Page:151

    HOT!
  • BLACK ROLL PIN KIT BROWNELLS More Detail

    BLACK ROLL PIN KIT BROWNELLS

    $2.59 - $63.99$2.59 - $63.99

    Growing Popularity Demands You Have This Convenient AssortmentWith the increasing use of roll pins in guns, we've been looking for a good assortment of them in black steel finish to offer. Finally found it - with 850 pins in 8 diameters and various lengths (see below). Should take care of most gun needs! Great for other shop jobs too. Make jigs, fixtures, or use to replace taper pins, dowels, groove pins, set screws, etc. Will not slip or vibrate out. Easy to use, as require no threading or taping. Can be cut to any length; can be blued or plated. Use the Roll Pin Punches for positive, safe removal. Big Book Catalog, Issue:68, Page:415

    HOT!
  • SINCLAIR SCOPE RING LAPPING KITS SINCLAIR INTERNATIONAL More Detail

    SINCLAIR SCOPE RING LAPPING KITS SINCLAIR INTERNATIONAL

    $3.95 - $79.99$3.95 - $79.99

    Unfortunately, all bases, rings, and actions are not manufactured in perfect alignment with each other. Whether you have a one-piece or two-piece base, the odds are against you that your rings will be in perfect alignment. Why chance putting your scope in a bind, whether it is a $200 scope or a $1000+ scope? The Sinclair Scope Ring Lapping Tools are designed to correct the misalignment of scope rings. The Sinclair Scope Ring Lapping Tool is used to align the rings first and then to remove just enough metal from the scope ring bearing surface to fine tune the alignment. Misaligned rings actually cause your scope's main tube to bend, causing distortion and requiring you to use excessive amounts of windage and elevation which moves the scope farther from its optical center. The farther you are from the optical center, the more likely you are to have distortion and a darker sight picture. Sinclair Scope Ring Lapping Tools ( 1 inch, 30mm, 34mm, 35mm) are made from ground accuracy stock stainless steel that has a tolerance of +/-.0005 inch. Each Sinclair Lapping Tool comes with the lapping bars are 10 inch in length, which gives you plenty of stroke length to quickly lap your scope rings. Sinclair, Issue:5B, Page:215

    HOT!
  • 60° DOVETAIL STANDARD SLOT SIGHT BASE FILES BROWNELLS More Detail

    60° DOVETAIL STANDARD SLOT SIGHT BASE FILES BROWNELLS

    $46.99 - $49.99$46.99 - $49.99

    The Professional Way To Safely Widen Or Cut New DovetailsSpecially manufactured, true parallel, 3-square file with only one side cutting - other two sides safe. This means the file can be used to widen dovetail slots in gun barrels without danger of deepening the slot or damaging the edge not being worked on. Being a true parallel file, you have absolute control over the angle of the dovetail - impossible with other type files. Big Book Catalog, Issue:68, Page:479 Big Book Catalog, Issue:68, Page:518

    HOT!
  • EPOXY METALS DEVCON EXPRESS More Detail

    EPOXY METALS DEVCON EXPRESS

    $36.99 - $101.99$36.99 - $101.99

    Putty Or Liquid For Strong, Machinable Rifle BeddingTwo-part epoxy forms maximum-strength rifle bedding, and helps repair non-critical metal parts. Fills voids, cracks and machine marks; excellent bonding strength for many wood-to-metal and metal-to-metal applications. Machinable after 4 hours; fully cures in 16 hours, or reduce cure time by applying heat per the manufacturers instructions. Highly resistant to chemicals and acids. Steel, Aluminum and Titanium available as putty. Steel also available as liquid for easy flow into tight areas, and making molds, fixtures and light gauge forming dies. Steel Putty and Titanium Putty meet Mil-Spec DOD-C-24176B(SH), Steel Liquid meets Mil-Spec MMM-A-1754, and Aluminum Putty meets Mil-Spec DOD-C-24176B. Big Book Catalog, Issue:68, Page:454

    HOT!
  • GLOCK 42/43 ADAPTER KIT MGW More Detail

    GLOCK 42/43 ADAPTER KIT MGW

    $33.99$33.99

    Glock 42/43 Adapter Kit fits the MGW309 and MGW309S Sight Movers to fit the compact Glock 42 and 43 pistols.  The adapter kit includes the adapter spacer and the shoe. Does not include sight pusher body

    HOT!
  • 308 AR LOWER RECEIVER VISE BLOCK BROWNELLS More Detail

    308 AR LOWER RECEIVER VISE BLOCK BROWNELLS

    $45.99$45.99

    Protects Receiver From Damage When Clamping In ViseHeavy-duty vise block takes all the clamping force, so your expensive lower receiver won’t get scratched, distorted, or otherwise damaged. Insert block into the mag well, just like an ordinary magazine, then clamp the other end in your bench vise. The magazine catch locks to the block, safely and securely holding the rifle for assembly, disassembly, cleaning, or repair. Double-ended design fits ArmaLite® AR-10®, Bushmaster .308, DPMS Panther™ LR-308, and Remington R-25. Does not fit Rock River Arms lower receivers. Machined from rugged, durable, chemical-resistant Delrin® polymer; will not mar or scratch weapon’s finish. AR-15, Issue:11, Page:085 Brownells Christmas , Issue:4X, Page:016 Big Book Catalog, Issue:68, Page:086 Mini-Catalogs, Issue:05, Page:006 New Product Supplement, Issue:621, Page:017 Sinclair, Issue:4S, Page:023

    HOT!
  • CAR-15/M4 BUTTSTOCK WRENCH BROWNELLS More Detail

    CAR-15/M4 BUTTSTOCK WRENCH BROWNELLS

    $79.99$79.99

    Solidly Engages The Receiver Extension Nut For Easy Installation & Removal Of Carbine ButtstocksDedicated wrench has four precision-machined teeth that ensure full, non-slip engagement of all four notches in an M4-type receiver extension nut for easy removal and installation of collapsible carbine buttstocks. Transfers all the torquing force to the nut for fast tightening or removal without risk of damage to nut, extension tube, or receiver caused by the wrench slipping. Includes the handy add-on features of our universal M4 buttstock tool: pry blade/screwdriver, " square torque drive opening, fixed stock receiver extension remover, and a convenient hole in the handle for hanging the wrench on a pegboard. Heavy duty steel construction, machined from a single piece of .312 thick steel, with a durable black oxide finish. AR-15, Issue:11, Page:083 Brownells Christmas , Issue:3X, Page:019 Big Book Catalog, Issue:68, Page:083 Law Enforcement / Police Store, Issue:08, Page:052 New Product Supplement, Issue:621, Page:015

    HOT!
  • CENTERFIRE HANDGUN DUMMY ROUNDS BROWNELLS More Detail

    CENTERFIRE HANDGUN DUMMY ROUNDS BROWNELLS

    $8.99 - $89.99$8.99 - $89.99

    Inert, Factory Spec Dummies Give Safe Function TestingManufactured to exact specifications, including diameter and length dimensions, weight and balance of factory loaded ammo, these DUMMIES have the proper functioning characteristics to reliably check magazine feeding, action timing, extraction and ejection of all guns. The only professionally accepted and safe way to check gun functioning; live ammo should never be used except in actual test-firing on the range - after you have checked the gun with DUMMIES. The very reasonable cost per DUMMY is an added incentive to use them regularly. The blackened case makes them distinct, and instantly recognizable as DUMMIES, which makes them ideal - and safe - to use as a sales aid. Especially useful when demonstrating how a particular gun functions or in gun safety instruction classes. They absolutely eliminate the chance of an accidental discharge. Big Book Catalog, Issue:68, Page:496 Cowboy Action, Issue:03, Page:034 Law Enforcement / Police Store, Issue:08, Page:054 New Product Supplement, Issue:602, Page:022

    HOT!
  • 1911 TRIGGER TRACK STONE BROWNELLS More Detail

    1911 TRIGGER TRACK STONE BROWNELLS

    $19.99$19.99

    Polish The Channel To Reduce Trigger Pull Of 1911 AutosPrecision ground to fit inside the trigger bow frame ways; polishes out the manufacturing burrs and rough edges that interfere with trigger movement. Made of premium ceramic for fast cutting action that quickly imparts a very smooth surface. Easy cleanup with soap and water. Truly essential to achieving a light, crisp, trigger. 1911, Issue:11, Page:060 Big Book Catalog, Issue:68, Page:155 Law Enforcement / Police Store, Issue:02, Page:041 New Product Supplement, Issue:641, Page:005

    HOT!
  • GUN SAV'R CUSTOM OIL GUNSTOCK FINISH CHEM-PAK More Detail

    GUN SAV'R CUSTOM OIL GUNSTOCK FINISH CHEM-PAK

    $16.49$16.49

    Fast-Drying, Easy-To-Use, Run-Proof Aerosol Our Tech Department gave this aerosol finish five stars. A super-tough, professional-looking stock finish applied in only hours without runs or sags. Fills as it coats so you won't spend extra time cutting-back or sanding in. Dries to the touch in only 45 minutes and can be recoated in as little as six hours. Specially formulated, oil-modified urethanes resist scuffs and scratches but provide the look and feel of traditional, hand-rubbed oil finishes, without all the hard work. Will not cloud or discolor with age; dries to a uniform satin finish without the aggravating splotches so common in many aerosol "furniture" finishes. Cannot ship outside Continental United States. Ship UPS Ground only within U.S. Big Book Catalog, Issue:68, Page:457 Mini-Catalogs, Issue:05, Page:013 New Product Supplement, Issue:581, Page:014

    HOT!
  • CUP TIP PUNCHES BROWNELLS More Detail

    CUP TIP PUNCHES BROWNELLS

    $11.99 - $100.85$11.99 - $100.85

    Prevent Those Beautiful Round-Headed Pins From Flat-Topping Eight concave “cupped” tip punches to precisely fit the round head pins found on Smith & Wesson handguns. Won’t flatten the pin top and ruin the gun’s looks. Made to the same specs as those used by the factory. Use 3mm punch on SIG handguns. Complete set (Set D listed below) includes a Delrin® bench block that holds and organizes all eight punches. Bench block also available separately 080-000-644. Big Book Catalog, Issue:68, Page:466 Big Book Catalog, Issue:68, Page:515 Big Book Catalog, Issue:68, Page:519 Law Enforcement / Police Store, Issue:08, Page:056 New Product Supplement, Issue:621, Page:016

    HOT!
  • SOCKET HEAD SCOPE RING & BASE SCREW KIT BROWNELLS More Detail

    SOCKET HEAD SCOPE RING & BASE SCREW KIT BROWNELLS

    $4.99 - $55.99$4.99 - $55.99

    168 Screws For Rings & Bases Put Socket Head Screws In Rings & Bases, Ribs, Sights & Custom Installations At A Great PriceWith this Socket Head Screw Kit you will have on hand the most popular and most wanted Socket Head screws - ideal when setting a screw down really tight is important - at a really economical price. Lets you fit Socket Head Screws to the widest possible variety of bases, rings, sights and ribs because we've matched the correct head to the required thread size and length for you. Saves you time, hassle and inventory! You get a full selection - 168 Socket Head Screws: 1 dozen each of 14 different screws includes 8 Fillister Head and 6 Weaver Oval Head styles in 4 lengths and 3 thread sizes (6-40, 6-48 and 8-40). Then, when custom fitting is required, or you need to shorten a screw for a particular job, we've included a hardened steel Checker/Shortener Jig to make it easy to grind any of the screws to length. Big Book Catalog, Issue:68, Page:412 Big Book Catalog, Issue:68, Page:413 Law Enforcement / Police Store, Issue:03, Page:033

    HOT!
  • RIMMED & BELTED RIFLE CHAMBERING REAMERS CLYMER More Detail

    RIMMED & BELTED RIFLE CHAMBERING REAMERS CLYMER

    $115.00 - $145.00$115.00 - $145.00

    Finest Workmanship & Quality; Made In USA From M-7 High Speed SteelMade by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.Note: If you do not see the caliber you are looking for below, please feel free to contact our Special Orders Department, as many additional items are avaliable from Clymer. Big Book Catalog, Issue:68, Page:493 Mini-Catalogs, Issue:15, Page:007

    HOT!
  • BARREL BEDDING TOOL GUNLINE More Detail

    BARREL BEDDING TOOL GUNLINE

    $16.99 - $143.99$16.99 - $143.99

    Full Control Of Cutting Head At All Times With All CutsPerfect, chatter-free cut, shaves out excess wood, leaves barrel channel smooth and ready for barrel without gouging, rasping or final sanding. Cushioned-cutter design keeps hardened steel cutter discs at correct angle to remove wood without "digging in" regardless of amount of pressure. A favorite with pros. Big Book Catalog, Issue:68, Page:449

    HOT!
  • AR-15/M16 CARRIER KEY STAKING TOOL BROWNELLS More Detail

    AR-15/M16 CARRIER KEY STAKING TOOL BROWNELLS

    $9.99 - $69.99$9.99 - $69.99

    Fast, Foolproof Staking Without Damaging Key, Screws, Or Carrier Precision-machined, solid steel tool lets you stake the carrier key screws the best way—from the sides—to ensure they don't back out under the most strenuous rapid-fire conditions. Eliminates the hassle of trying to stake the screws with a hammer and punch that could slip and damage the key, screws, or carrier. Holds carrier securely and positions the key so it can be dimpled in the correct locations by tightening the four hex screws on the tool. An additional retaining screw on top of the tool prevents the carrier from moving. The tip of this screw is machined flat to make sure it applies even retaining force and won't mar the carrier. All screw tips are hardened to Rc 58-62 for durability; however, sometimes screws will break, so we offer a 4-pak of replacement screws. AR-15, Issue:11, Page:087 Big Book Catalog, Issue:68, Page:088

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!