• THREADED BARREL for GLOCK® LONE WOLF DIST. More Detail

    THREADED BARREL for GLOCK® LONE WOLF DIST.

    $119.99 - $129.99$119.99 - $129.99

    Threaded For Compensator, With Conventional Rifling & Fully Supported Chamber Match-grade barrel has a threaded muzzle to enable mounting of a compensator or suppressor. Machined from a 416 stainless forging to tighter-than-factory tolerances for drop-in fit and improved lockup, with conventional land-and-groove rifling for excellent potential accuracy with both lead and jacketed ammunition. The improved feed ramp design ensures proper feeding with a wide variety of bullet types and provides maximum chamber support. Thread protectors sold separately. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:68, Page:222 New Product Supplement, Issue:641, Page:024 Personal Protection, Issue:01, Page:016

    HOT!
  • 1911 DROP-IN MATCH BARRELS ED BROWN More Detail

    1911 DROP-IN MATCH BARRELS ED BROWN

    $179.99$179.99

    No Fitting Required For Match Grade AccuracyCNC machined with slightly oversized dimensions for tighter barrel lockup and a Match Quality, drop-in fit. Premium stainless steel bar stock is machined, heat treated and cryo stress relieved before final rifling to improve accuracy and barrel life. Precision, broach cut rifling gives outstanding accuracy with all bullet types, including lead. Complete kit includes pre-fit, match-grade barrel, bushing, link and pin for faster installation. May require minor fitting. 1911, Issue:11, Page:005 Brownells Christmas , Issue:5X, Page:010 Big Book Catalog, Issue:68, Page:103 Law Enforcement / Police Store, Issue:03, Page:021 New Product Supplement, Issue:522, Page:000 Sinclair, Issue:1A, Page:004 Sinclair, Issue:1A, Page:005

    HOT!
  • 1911 PRECISION QUALITY BARREL KART PRECISION BARREL More Detail

    1911 PRECISION QUALITY BARREL KART PRECISION BARREL

    $159.99 - $199.99$159.99 - $199.99

    Uncompromising Quality For Added Performance & Better AccuracyForged from ordnance steel to strict, national match specs; rifled by a proprietary technique that holds lands and grooves to exceptionally close tolerances and leaves the surface finish mirror smooth. Air gauged to maintain .0002" tolerance through the bore. Feed ramps are throated for wadcutter ammo. Standard Barrel - Non-ramped, oversize hood, top and bottom lugs to achieve an exact fit for optimum match accuracy. Ramped Barrel - Fully supports the case head; gives direct feeding from magazine to chamber. 1911, Issue:11, Page:005 Big Book Catalog, Issue:68, Page:105 New Product Supplement, Issue:602, Page:001 Sinclair, Issue:1A, Page:005

    HOT!
  • 1911 45 ACP SUPPRESSOR READY THREADED BARRELS ED BROWN More Detail

    1911 45 ACP SUPPRESSOR READY THREADED BARRELS ED BROWN

    $249.99$249.99

    Identical to the standard drop-in Ed Brown barrel, but longer length and threaded for use with suppressors. Thread size is 0.578 x 28 tpi RH. Includes link, link pin, bushing and thread protector. Barrel accuracy comes from using the highest quality materials and manufacturing methods. Ed Brown Products is committed to both.  The barrels are made from T-416 modified, gun barrel quality stainless steel bar stock, just like a benchrest rifle barrel.  T-416 is certified pure, there are no foreign materials, and no hard or soft spots to worry about. It is stress-relieved and heat-treated prior to final rifling and refinishing. Ed Brown barrels are precision machine cut from a 3 pound chunk bar of this top quality steel. Ed Brown barrels are rifled by precision broach in the original six lands and grooves, one turn in sixteen, left hand twist as originally designed by John Browning. This deep cut, broached rifling gives superior accuracy with all types of bullets, including lead.  Ed Brown barrels are heat-treated by an aerospace certified heat treat facility, and sub-zero frozen for maximum strength and stress relief. This means more accuracy and longer barrel life to the shooter. Ed Brown has also cut the dimensions to max tolerance on the outside of the barrel. This means less fitting work for you, and more accuracy. A suppressor equipped with a Nielsen device (such as 276-000-055) is REQUIRED for reliability in a 1911. This is also referred to as a booster, kicker, or Linear Inertial Decoupler.

    HOT!
  • 1911 XACT FIT BARREL KIT KART PRECISION BARREL More Detail

    1911 XACT FIT BARREL KIT KART PRECISION BARREL

    $199.99 - $244.99$199.99 - $244.99

    Achieve A Match Quality Barrel Installation Using Only Hand Tools Install a precision quality barrel using just four small hand tools. The only fitting required is to adjust lockup with the two raised pads located on either side of the rear locking groove, cut the barrel hood to correct length and fit the bushing to the slide. A national match bushing is pre-fit to the barrel; has oversize O.D. for precise fitting to slide. Bottom lugs are fully finished and the correct length link installed to save hours of work. 1911, Issue:11, Page:005 Big Book Catalog, Issue:68, Page:104 Law Enforcement / Police Store, Issue:03, Page:021 New Product Supplement, Issue:512, Page:000 Sinclair, Issue:1A, Page:005

    HOT!
  • SEMI DROP-IN BARRELS FOR S&W M&P APEX TACTICAL SPECIALTIES INC. More Detail

    SEMI DROP-IN BARRELS FOR S&W M&P APEX TACTICAL SPECIALTIES INC.

    $199.95$199.95

    The Apex Grade Semi Drop-In Barrel for the S&W M&P is available in either a 5.00" or 4.25" option. The stainless steel barrel features a 1:10" twist rate. The design increases accuracy performance, making the M&P capable of shooting as small as a 1-1/2 inch grouping at 25 yards. Accuracy test results based on using a mechanical rest. Final results may vary based on shooter ability, ammunition selection, and variations in factory firearm tolerances. Direct drop-in replacement of factory barrel. Improves accuracy and optimal performance is seen with bullet weights of 115 gr. Through 147gr. Using 9mm jacketed ammunition. Due to variations in factory slide tolerances, slight fitting may be required and is easily performed by the end user.We recommend the use of the 6" #0 Narrow Pillar File, 191-400-760, for installation of the barrels. Patent Pending.

    HOT!
  • SIG THREADED BARREL FOR P220 .45/P226 9MM/P229 9MM SIG SAUER More Detail

    SIG THREADED BARREL FOR P220 .45/P226 9MM/P229 9MM SIG SAUER

    $230.99 - $260.99$230.99 - $260.99

    Genuine Sig Sauer factory replacement threaded barrels for drop in fit. Threading allows for use of suppressors or other muzzle devices. Thread pitch for 9mm is 13.5 X 1mm LH, and .45ACP is .578 X 28 TPI. Big Book Catalog, Issue:68, Page:222

    HOT!
  • 1911 PRE-FIT MATCH-GRADE ECM BARREL KIT NOWLIN More Detail

    1911 PRE-FIT MATCH-GRADE ECM BARREL KIT NOWLIN

    $239.99 - $259.99$239.99 - $259.99

    Pre-Fit Barrels Complete With Bushing, Link & PinThe easiest way to install the superb performance of Nowlin's ECM Match-Grade Barrels in your 1911 Auto. Barrel Kit comes complete with a pre-fitted, stainless steel bushing, barrel link and pin with little-to-no fitting required for installation. Barrels feature pre-fitted hood, top lugs and bottom feet that give a very close fit for increased accuracy in most 1911 Autos. Includes factory-standard link and hardened, oversize pin. Gold Cup has narrow, .385" width hood to fit Colt-style, Gold Cup, Enhanced and Flat Tops with narrow hood. Non-ramped, 5" long, .45 ACP only. 1911, Issue:11, Page:005 Big Book Catalog, Issue:68, Page:103 Law Enforcement / Police Store, Issue:05, Page:025 New Product Supplement, Issue:541, Page:000 Sinclair, Issue:1A, Page:006

    HOT!
  • THREADED PISTOL BARRELS ADVANCED ARMAMENT More Detail

    THREADED PISTOL BARRELS ADVANCED ARMAMENT

    $214.99$214.99

    Threaded pistol barrels chambered in 9mm and 45 Auto.  Precision CNC machined from 416R stainless steel with a black Isonite QPQ finish, all AAC silencer ready barrels feature cut broach rifling for compatibility with jacketed and lead ammunition. AAC silencer ready barrels are designed to drop in and function with no fitting required, and feature chamber dimensions that will accept all commercial, SAAMI specification ammunition.  Available with unified threads (1/2x28 for 9mm & .578x28 for 45 Auto) and left hand metric muzzle thread profiles (M13.5x1LH for 9mm & M16x1LH for 45 Auto) where applicable.  Each threaded barrel comes with a knurled thread protector cap. Big Book Catalog, Issue:68, Page:221

    HOT!
  • ALPHAWOLF THREADED BARRELS FOR GLOCK® LONE WOLF DIST. More Detail

    ALPHAWOLF THREADED BARRELS FOR GLOCK® LONE WOLF DIST.

    $169.95$169.95

    Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated. Threaded models fome with appropriate thread protector.

    HOT!
  • S&W M&P PRE-FIT MATCH GRADE BARRELS STORM LAKE More Detail

    S&W M&P PRE-FIT MATCH GRADE BARRELS STORM LAKE

    $151.99 - $213.99$151.99 - $213.99

    Broach Cut Rifling For Optimum Accuracy With All Bullet TypesReady-to-install, match grade 416R stainless steel barrels with broach-cut rifling provide outstanding accuracy with both copper jacketed and lead bullets. CNC machined to precise tolerances, then hardened to Rc 40-42 for superior strength and durability. Chambered for maximum case support. Drop-in installation, may require minor modifications to fit certain models. Ported models are longer than factory barrel and have two ports on top, at the muzzle, to vent blast upward and counteract muzzle flip to help you get back on target faster. Threaded models are also longer than factory barrel and come pre-threaded to accept screw-on aftermarket compensators. Thread pitch is indicated in table; comes with a thread protector. .40 S&W-To-9mm Conversion barrel converts M&P Compact .40 S&W caliber pistols to shoot 9mm ammunition; 9mm extractor and ejector must be installed to ensure reliable shell ejection. .40 S&W-To-.357 SIG Conversion converts a full-size M&P .40 S&W pistol to shoot .357 SIG. Big Book Catalog, Issue:68, Page:222 Mini-Catalogs, Issue:01, Page:007 New Product Supplement, Issue:621, Page:021 Personal Protection, Issue:01, Page:016

    HOT!
  • THREADED BARREL FOR GLOCK 43 ATI More Detail

    THREADED BARREL FOR GLOCK 43 ATI

    $159.99$159.99

    Match grade drop in threaded barrel with thread protector. Precision engineered CNC cut 416R stainless steel. Broach cut and finish honed. Drop in fit, no gunsmithing required. Billet thread protector included. Threaded 1/2-28, 1:10 right hand twist. Compatible with lead bullets. Match grade accuracy. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H. Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H. The use of Glock on this page is merely to advertise the sale of Glock parts or components. As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

    HOT!
  • MATCH GRADE BARRELS FOR S&W M&P WILSON COMBAT More Detail

    MATCH GRADE BARRELS FOR S&W M&P WILSON COMBAT

    $189.95 - $229.95$189.95 - $229.95

    Easily enhance the accuracy of your Smith and Wesson M&P handgun! Wilson Combat® Match-Grade Barrels are known for their unsurpassed quality and accuracy. Now your M&P handgun can have this superb accuracy without sending your pistol off to a master pistolsmith and waiting for months. Wilson Combat® match barrels are fully machined from aircraft grade stainless steel blanks and heat-treated to R/C 40 for maximum service life. Critical manufacturing tolerances are held to less than .0005" (one half thousandth of an inch!). To give you phenomenal accuracy, extreme care has been taken to assure that the chamber is glass smooth and perfectly concentric with the bore. In their barrel test fixture they routinely obtain test groups of 1/2" @ 25 yards! Throughout the manufacturing process each barrel undergoes multiple quality-control checks, with a detailed final inspection prior to receiving the Wilson name. You can be sure that if your barrel bears the Wilson name, it's the best there is! Match-Grade - Superb Accuracy (2" Or Less At 25 Yards With Match Ammo is typical) Polished feed ramp, bore and supported chamber 1 in 16" twist conventional broach rifling Fully Machined From 416R Stainless Steel Heat-Treated To R/C 40 For Maximum Service Life Critical Manufacturing Tolerances Are Held To Less Than .0005" (One Half Thousandth Of An Inch!) Glass Smooth Chamber And Perfectly Concentric With The Bore In their Barrel Test Fixture they Routinely Obtain ½" At 25 Yard Groups Detailed Final Inspection Prior To Receiving The Wilson Name On The Hood Critical Lock-Up Contact Areas Cut To A Dimension That Provides A Good Lock-Up in most guns Compatible with Smith & Wesson M&P handguns in 9mm caliber NOTE: Due to variations in pistol dimensions, installation in some pistols may require very minor material removal in the hood or locking lug area which most people can easily do themselves.  In some pistols your sights may require adjustment after installation.  

    HOT!
  • STOCK LENGTH BARRELS for GLOCK® LONE WOLF DIST. More Detail

    STOCK LENGTH BARRELS for GLOCK® LONE WOLF DIST.

    $104.99$104.99

    Match grade replacement barrels Manufactured from the highest grade mill select 416 stainless forgings  CNC machined and heat treated Standard groove and land rifling make this an excellent choice for those who wish to shoot lead, plated, or jacketed bullets Can be used in factory ported or stock pistols Ready to use, pre-fit drop-in Oversized lock-up area produces greater  shot-to-shot accuracy Tighter dimension than original barrels Polished feed ramp and bore Diamond turned exterior Maximum chamber support Improved feed ramp design Match grade broach cut rifling and target crown Lifetime warranty “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:68, Page:221

    HOT!
  • THREADED BARRELS FOR GLOCKS® SILENCERCO More Detail

    THREADED BARRELS FOR GLOCKS® SILENCERCO

    $199.99$199.99

    Silencerco’s threaded barrels for Glock® handguns are made from 416R stainless steel with a black nitride finish. These fit both Gen 3 and Gen 4 Glocks®. 9mm barrels have 1/2x28 threads, while the .45 ACP barrel has .578x28. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products.

    HOT!
  • 1911 BARREL LINK WILSON COMBAT More Detail

    1911 BARREL LINK WILSON COMBAT

    $5.99 - $26.99$5.99 - $26.99

    Adjusts Lockup For Best AccuracyLong and short barrel links kit; select the one giving best lockup and functioning. Nominal Colt spec is .278" hole, center-to-center. 1911, Issue:11, Page:008 Big Book Catalog, Issue:68, Page:107 Sinclair, Issue:1A, Page:009

    HOT!
  • 1911 PRE-FIT BARREL KIT STORM LAKE More Detail

    1911 PRE-FIT BARREL KIT STORM LAKE

    $180.99 - $259.99$180.99 - $259.99

    Complete, Ready-To-Install With Little To No Fitting Required Save time and gain accuracy when re-barreling your 1911 Auto. Includes stainless steel or black isonite, match-grade barrel complete with prefitted bushing, link and pin that makes building an accurate pistol faster and easier. Locking lugs and barrel hood are sized to require little to no gunsmithing to fit most slides. .45ACP threaded models have .578-28 threads and 9mm models have 1/2"-28 threads. Government and Commander Model in .45 ACP and 9mm.  Officer available in .45 ACP only. Has Standard(non-ramped) barrel.   1911, Issue:11, Page:006 Big Book Catalog, Issue:68, Page:105 Law Enforcement / Police Store, Issue:03, Page:021 New Product Supplement, Issue:503, Page:000 Sinclair, Issue:1A, Page:007

    HOT!
  • S&W M&P THREADED BARRELS STORM LAKE More Detail

    S&W M&P THREADED BARRELS STORM LAKE

    $232.99$232.99

    Features: Machined 416 Stainless Steel Smith & Wesson M&P Barrels Black Isonite QPQ finish Held to tolerances of .001” Cut-broach rifling 1-16 twist Include thread protector Rc 40-42 May require minor fitting Available for Full Size 9mm, 40S&W and 45ACP M&Ps 9mm Barrel available with ½-28 or ½-32 threading (for suppressor without o-ring) 40 S&W Barrel gas 9/16-24 threading (for suppressor without o-ring) 45ACP Barrel has .578”-28 threading (for suppressor without o-ring) Benefits: Cut-broach rifling allows for cast bullets, as well as jacket bullets to be used Tight tolerances maximize accuracy Threading allows for attachment of suppressors or other muzzle devices Black Isonite QPQ finish protects the Stainless Steel while providing a subdued, non-glare finish

    HOT!
  • THREAD PROTECTORS for GLOCK® LONE WOLF DIST. More Detail

    THREAD PROTECTORS for GLOCK® LONE WOLF DIST.

    $13.45$13.45

    Protects your threaded barrel when an accessory is not installed. Fits Lone Wolf threaded barrels and others with the specified thread pattern only. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:68, Page:222 New Product Supplement, Issue:641, Page:024 Personal Protection, Issue:01, Page:016

    HOT!
  • ALPHAWOLF CONVERSION BARRELS FOR GLOCK® LONE WOLF DIST. More Detail

    ALPHAWOLF CONVERSION BARRELS FOR GLOCK® LONE WOLF DIST.

    $149.95 - $169.95$149.95 - $169.95

    Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Converts .40 S&W and  .357 Sig to 9mm. Heat treated to RC 40-42, then Salt Bath Nitride coated.

    HOT!
  • ALPHAWOLF BARRELS FOR GLOCK® LONE WOLF DIST. More Detail

    ALPHAWOLF BARRELS FOR GLOCK® LONE WOLF DIST.

    $149.95$149.95

    Alpha Wolf barrels establish the benchmark for absolute accuracy and combat reliability. It is the pinnacle of what every other barrel manufacturer strives to be. Exaction tolerances allow for a drop in installation. Designed for lead, plated, or jacketed ammunition. Heat treated to RC 40-42, then Salt Bath Nitride coated.

    HOT!
  • 1911 MATCH GRADE THREADED BARRELS NIGHTHAWK CUSTOM More Detail

    1911 MATCH GRADE THREADED BARRELS NIGHTHAWK CUSTOM

    $230.00$230.00

    Match Grade 1911 416 Stainless Steel Threaded Barrels. Chambered in 9mm and 45 ACP. 9mm barrel features Wilson/Nowlin style ramp. Barrels thread pitch is .578x28 and includes a thread protector. Barrels are 5.755" OAL. Gunsmith fit is required. 1911, Issue:11, Page:005 Big Book Catalog, Issue:68, Page:103

    HOT!
  • GUNSMITH FIT BARRELS FOR S&W M&P APEX TACTICAL SPECIALTIES INC. More Detail

    GUNSMITH FIT BARRELS FOR S&W M&P APEX TACTICAL SPECIALTIES INC.

    $199.95$199.95

    The Apex Grade Gunsmith Fit Barrel for the S&W M&P is available in either a 5.00" or 4.25" option. The barrel requires fitting by a competent gunsmith. The stainless steel barrel features a 1:10" twist rate. The design increases accuracy performance, making the M&P capable of shooting as small as a 1-inch grouping at 25 yards. Accuracy test results based on use of a mechanical rest. Final results may vary based on shooter ability, ammunition selection, and variations in factory firearm tolerances. Optimal performance is seen with bullet weights of 115gr. Through 147 gr. Using 9mm jacketed ammunition. Works with all S&W M&P pistols requiring a 5.00" or 4.25" barrel. Patent Pending.

    HOT!
  • 1911 DROP-IN COMPENSATOR KIT CLARK CUSTOM More Detail

    1911 DROP-IN COMPENSATOR KIT CLARK CUSTOM

    $279.99$279.99

    Drops Right In & It's Ready To WorkNo fitting or gunsmithing required to get the increased muzzle control and accuracy of Clark's dual-port compensators and match-grade barrel. Comp helps control recoil and muzzle flip for improved accuracy and a faster follow-up shot. Match-grade, button-rifled barrel and pre-fit bushing provide a close fit on most slides for increased accuracy, function and reliability. 1911, Issue:11, Page:004 Big Book Catalog, Issue:68, Page:103 Sinclair, Issue:1A, Page:005

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!