• 1911 SLIDES CASPIAN More Detail

    1911 SLIDES CASPIAN

    $211.99 - $313.99$211.99 - $313.99

    Superb Strength & Precise Tolerances For The Ultimate Combat Pistol Custom-quality slides from Caspian, ready to be fitted to the frame of your choice. They start as high-quality forgings for extra strength, then are heat-treated to Rc 38-41 before machining for exceptional dimensional stability. Sides are polished, while the rest of the surface is bead-blasted for a non-glare, matte finish. Deep-cut, forward-angled rear cocking serrations prevent slippage when racking, even with a wet hand. Available in 4340 carbon steel (CS) and 416 stainless steel (SS) with .45 ACP, .40 S&W, and 9mm breechfaces. Commander and Officers models in .45 ACP only. Choose a slide without sight cuts (NC), or between two pre-cut dovetail options: a Novak Lo-Mount or Bo-Mar BMCS rear cut, both coupled with a Novak front cut. Recon slide is a Government slide with ball cuts at the front that line up with the light rail on the Caspian Recon frame (available separately). All slides require the use of a 9mm/.38 Super firing pin. 1911, Issue:11, Page:001 Brownells Christmas , Issue:5X, Page:010 Big Book Catalog, Issue:68, Page:100 Law Enforcement / Police Store, Issue:04, Page:023 Mini-Catalogs, Issue:05, Page:003 New Product Supplement, Issue:593, Page:009 Sinclair, Issue:1A, Page:001

    HOT!
  • 1911/2011 SLIDES STI More Detail

    1911/2011 SLIDES STI

    $220.99 - $349.99$220.99 - $349.99

    STI International slides are CNC milled from pre-hardened barstock 4140 carbon steel to ensure slide rail exactness. The breech face is wire EDM cut for maximum precision angle. These are available in either 5″ (Government), or 6″ (Long Slide). The slides have lowered and flared ejection ports for reliable case ejection. STI slides fit both 1911 and 2011 frames. 355 is compatible with 9mm, 38 Super and similar cartridges. 400 is compatible with 40 S&W and similar cartridges. 450 is compatible with 45 ACP and similar cartridges. 1911, Issue:11, Page:002 Big Book Catalog, Issue:68, Page:101

    HOT!
  • RIMFFIRE TARGET CONVERSION KIT KIMBER MFG. More Detail

    RIMFFIRE TARGET CONVERSION KIT KIMBER MFG.

    $339.00 - $339.99$339.00 - $339.99

    Train With Economical .22 LR Ammo In Your Full-Size Pistol Blowback-operated sub-caliber conversion unit lets you shoot less expensive.22 LR ammunition in any mil-spec 1911 Government model, so you can afford to practice more. Preserves pistol’s weight, balance, and overall feel to help you develop specific skills and “muscle memory” to shoot better with full-power ammo. Simply remove the factory slide and barrel, replace them with the conversion unit, and load up the included .22 magazine with premium-grade high-velocity ammunition. Manufactured to the same rigorous quality standards as Kimber’s full-power 1911 pistols; slide is precision machined from aluminum billet, with wide front and rear cocking serrations and Kimber’s tough, scratch-resistant, KimPro II™ finish. Comes with plain black target sights installed; rear sight is click adjustable for windage and elevation, with flat, finely serrated rear face and a square notch. Includes ramped, match-grade 5" barrel with a 1:16" left-hand twist and stainless steel match-grade bushing. Reinforced polymer 10-round magazine is designed for a secure fit in a standard .45 ACP mag well, and has an anti-tilt polymer follower to ensure smooth feeding of rounds. Slide does not lock open after last shot; pistol may be dry fired with kit installed. 1911, Issue:11, Page:003 Big Book Catalog, Issue:68, Page:102 Law Enforcement / Police Store, Issue:07, Page:029 New Product Supplement, Issue:611, Page:001 Personal Protection, Issue:01, Page:026 Sinclair, Issue:1A, Page:004

    HOT!
  • 1911 CUSTOM SLIDES NIGHTHAWK CUSTOM More Detail

    1911 CUSTOM SLIDES NIGHTHAWK CUSTOM

    $305.00 - $345.00$305.00 - $345.00

    Manufactured using the same rigorous production process as their Government Model receivers (see description on this page), Nighthawk’s 1911 slides are precision machined from high-grade stainless steel forgings. They provide oustanding strength, quality, and customizability for any high-end 1911 build. Offered in separate models for a standard .45 ACP or 9mm barrel (excellent choice for a racegun), these slides are available with precision-cut dovetails for Novak front and rear sights, or a plain, Smooth top so you can cut dovetails for the custom sights of your choice. Novak cut model includes aggressive front and rear cocking serrations, while the Smooth slide also has Smooth sides, again allowing you to customize it with your or your customer’s preferred serration pattern. All of these slides feature a lowered and flared ejection port and a smooth, non-glare matte finish. 1911, Issue:11, Page:002 Big Book Catalog, Issue:68, Page:101

    HOT!
  • INNER PIN, H.D. BLUE, TWO TONE SIG SAUER More Detail

    INNER PIN, H.D. BLUE, TWO TONE SIG SAUER

    $8.99$8.99

    FITS: P220, .45 ACP; P225, 9mm; P226, 9mm; P228, 9mm; P245, .45 Big Book Catalog, Issue:68, Page:659 Big Book Catalog, Issue:68, Page:660 Big Book Catalog, Issue:68, Page:662

    HOT!
  • OUTER PIN, H.D. BLUE, TWO TONE SIG SAUER More Detail

    OUTER PIN, H.D. BLUE, TWO TONE SIG SAUER

    $8.99$8.99

    FITS: P220, .45 ACP; P225, 9mm; P226, 9mm; P228, 9mm; P245, .45 Big Book Catalog, Issue:68, Page:659 Big Book Catalog, Issue:68, Page:660 Big Book Catalog, Issue:68, Page:661 Big Book Catalog, Issue:68, Page:662

    HOT!
  • 1911 SLIDE LES BAER CUSTOM More Detail

    1911 SLIDE LES BAER CUSTOM

    $379.99 - $524.99$379.99 - $524.99

    Precision Forged & Machined In The USA; Ready To Build With Custom FeaturesSlides come standard with lowered ejection port, surface-ground flats and bead-blasted rounds. Available with rear only (R) or front and rear (DBL) serrations, and with or without (NS) sight cuts. The front sight cut accepts 65 x .330", dovetail front sights. Pre-machined rear sight cuts will accept the Bo-Mar (Bo-Mar) BMCS with hidden leaf cuts or the Novak (Novak) Low Mount Combat Sight (.495") dovetail. Lengths listed in specs are nominal barrel lengths the slides will accept. 1911, Issue:11, Page:001 Big Book Catalog, Issue:68, Page:101 New Product Supplement, Issue:503, Page:000 Sinclair, Issue:1A, Page:001

    HOT!
  • SLIDE COMPLETION KITS FOR GLOCK® LONE WOLF DIST. More Detail

    SLIDE COMPLETION KITS FOR GLOCK® LONE WOLF DIST.

    $100.33 - $105.40$100.33 - $105.40

    The majority of parts to build a 10mm bare slide into a complete slide. (No recoil spring or sights). Includes channel liner, spacer sleeve, marine spring cups, mid-weight striker spring, striker, LCI extractor, Spring loaded bearing, depressor plunger spring, depressor plunger, firing pin safety, firing pin safety spring, slide cover plate.

    HOT!
  • 1911 2211 CONVERSION KIT TACTICAL SOLUTIONS, LLC More Detail

    1911 2211 CONVERSION KIT TACTICAL SOLUTIONS, LLC

    $379.99$379.99

    Hone Critical Shooting Skills Using Economical .22 LR Ammo Complete .22 LR conversion system comes fully assembled and ready to install on your 1911 Government model or Commander to help you practice critical shooting skills with economical rimfire ammo. Concentrate on improving grip, sight alignment, trigger pull, breath control, and other skills without burning up expensive, full-power ammo. Simply remove the slide as if you’re field stripping, and replace with the 2211 slide/barrel assembly and 10-round rimfire magazine. With the 2211 installed, the gun functions normally—the slide even locks open after the last round is fired. Precision machined entirely from high-grade steel to the same high standards of workmanship as a custom-quality competition pistol, with a lustrous, matte blued finish. Custom features include wide, crisply milled front and rear cocking serrations, 4½" bull barrel with integral feed ramp, full-length steel guide rod, and a “flattop” sight rail with front and rear competition sights already installed. Champion rear target sight is fully click adjustable for windage and elevation, with an easy-to-acquire .110" wide square notch and flat, serrated rear face. Plain black front sight has glare-inhibiting serrations on front and rear faces. Lightweight polymer 10-round magazine has flared baseplate to aid positive seating in oversized magwells. 1911, Issue:11, Page:003 Big Book Catalog, Issue:68, Page:102 New Product Supplement, Issue:611, Page:001 Personal Protection, Issue:01, Page:026 Sinclair, Issue:1A, Page:004

    HOT!
  • SINGLE ACTION ARMY 1ST,2ND,3RD GEN BOLT SMITH ENTERPRISE More Detail

    SINGLE ACTION ARMY 1ST,2ND,3RD GEN BOLT SMITH ENTERPRISE

    $64.99$64.99

    Rebuilding, Accurizing, Tuning & RestorationHeat-treated, spring steel, hardened and oversize action parts for rebuilding and accurizing Colt Single Action Army revolvers. All are slightly oversize to allow precise fitting. Bolts are radiused between the forks to resist breakage, extra wide lug provides for exact fit to cylinder locking slots. 1st Gen. bolt is shaped and contoured to match the original. 2nd/3rd Gen. bolt will fit all 1st, 2nd, 3rd generation guns. Hand, for 1st and 2nd generation guns, is hardened and heat treated to improve durability. Left slightly long for precise fitting. Big Book Catalog, Issue:68, Page:242 Cowboy Action, Issue:03, Page:007 New Product Supplement, Issue:535, Page:000

    HOT!
  • TSG-22™ CONVERSION KITS FOR GLOCK® TACTICAL SOLUTIONS, LLC More Detail

    TSG-22™ CONVERSION KITS FOR GLOCK® TACTICAL SOLUTIONS, LLC

    $379.99$379.99

    The TSG-22 Gen 2 Conversion Kit quickly and easily converts any generation of Glock® models 17&22 or 19&23 into a .22LR pistol. Machined from a solid piece of heat treated 4140 steel, the TSG-22 maintains a similar weight and feel to your factory Glock®,allowing realistic shooting and training. A nitride surface treatment offers superb resistance to wear and surface friction. The TSG-22 fits comfortably onto your Glock frame in just seconds. Comes with a 10 or 15 round magazine. Additional Tactical Solutions magazines are also available through Brownells (100-009-462 & 100-009-463). Generation 2 Conversion Kit: Barrel can be removed like a factory Glock® without removing the firing pin housing Previous version required taking out two screws to remove the housing Functions with a wider variety of ammunition Durable Melonite QPQ Finish for increased wear resistance Recommended ammunition: CCI Blazers CCI Mini-Mag HV Federal Game-Shok 40 grain solid   “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:68, Page:220

    HOT!
  • 1911 GOVERNMENT SLIDE 45ACP SS WITH RMR CUT ED BROWN More Detail

    1911 GOVERNMENT SLIDE 45ACP SS WITH RMR CUT ED BROWN

    $327.50$327.50

    This Ed Brown 1911 Government Model Slide comes with the unique feature of being pre-cut for Trijicon RMR Mounts with Integrated Sights (Brownells SKU 892-000-174).  By including this cut, the slide allows for a simple installation of the sight assembly & RMR optic.  Other 1911 mounting options require an unsightly mount placed in the rear sight cut or sit high on the slide.  Also, the Ed Brown 1911 RMR Slide saves time, as no machining of the slide is necessary to install teh unique Trijion mount.  The end result is a low profile, rugged, optic & iron sight setup.  The slide also features front and rear cocking serrations.  Slide is machined from forged stainless steel and is ready for fitting.

    HOT!
  • MARK SERIES COMPETITION BOLTS VOLQUARTSEN More Detail

    MARK SERIES COMPETITION BOLTS VOLQUARTSEN

    $239.99$239.99

    The Competition Bolt is CNC machined and ground for superior tolerances, fit and finish. It features an Exact Edge Extractor as well as the SureStrike Firing Pin. The Competition Bolt has an integral “Extended Bolt Racker” to allow for improved manually cycling of the bolt – no more pinched fingers! Big Book Catalog, Issue:68, Page:219

    HOT!
  • SLIDE ASSEMBLY, 92FS BERETTA USA More Detail

    SLIDE ASSEMBLY, 92FS BERETTA USA

    $259.99$259.99

    FITS: Model 92 Big Book Catalog, Issue:67, Page:563

    HOT!
  • 50 GI® CONVERSION SYSTEM for GLOCK® GUNCRAFTER More Detail

    50 GI® CONVERSION SYSTEM for GLOCK® GUNCRAFTER

    $54.99 - $599.99$54.99 - $599.99

    Steps Up Large-Frame Glock Pistol To Powerful .50 Caliber cartridge Drop-in conversion system replaces the top end of your Glock 20/21 pistol and converts it to fire the hard-hitting, yet controllable, 50 GI cartridge. Developed by Guncrafter, the 50 GI’s head is the same diameter as a .45 ACP, so the rest of your pistol remains stock, allowing easy conversion back to the original caliber. 50 GI ammo can be loaded to drive a 185 grain bullet at 1,200fps, with a felt recoil similar to 230 grain .45 ACP ball ammo. Delivers greater knock-down power, while remaining controllable during rapid fire. Conversion unit comes fully assembled with 4½" stainless steel barrel, firing pin, and guide rod with captive recoil spring. Slide and barrel are precision machined from stainless steel forgings to the same exacting tolerances as the original factory components. Non-reflective, matte finish is durable and good-looking. Black polymer fixed sights with easy to acquire white dot on front sight and U-shaped white outline around rear sight notch. The SF-style magazine uses a modified .45 ACP follower and has an extended base pad that allows it to hold 9 rounds; convenient witness holes at the rear. Fits standard mag pouches for .45 caliber Glock mags. Cut for SF-style magazine catch. Additional magazines available separately. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:68, Page:219

    HOT!
  • KANEWOLF SLINGSHOT UPGRADE TANDEMKROSS More Detail

    KANEWOLF SLINGSHOT UPGRADE TANDEMKROSS

    $24.99$24.99

    In most modern firearms its common for the user to be able to pull back on the slide and release to load the first round into the chamber. This is often referred to as "sling shot" action. Frustratingly enough, for the Ruger 22/45 this is not the case. The design of the bolt stop forces the shooter to press on the slide release to load the first round. Unfortunately, in the case the user does not first pull the bolt back this action can result in wear on the bolt stop and bolt face. The "KaneWolf" part kit installs in minutes and allows Ruger 22/45 owners to perform reliable and consistent "sling shot" action. With a specially designed bolt stop that is spring assisted your Ruger 22/45 can function just like any other modern firearm today. All other functions of the pistol are completely unaffected, including the last round hold open. The "KaneWolf" part kit installs in minutes and allows Ruger 22/45 owners to perform reliable and consistent "sling shot" action. All other functions of the pistol are completely unaffected.  Get a "KaneWolf" for your Ruger 22/45 today! Please note that this part kit is designed to fit all Ruger polymer frame Mark III 22/45 model pistols.  

    HOT!
  • SLIDE PLATE FOR GLOCK® TACTICAL SUPPLY DEPOT More Detail

    SLIDE PLATE FOR GLOCK® TACTICAL SUPPLY DEPOT

    $24.99$24.99

    Functional All-Metal Construction; Personalizes Your Glock Durable, machined aluminum slide plate replaces factory plastic part and is laser etched with a distinctive decorative logo that dresses up your favorite Glock® pistol with your own personal statement. Drop-in fit, so no modifications to the slide are required. Logos will not fade or wear off. Available with American Flag, Jolly Roger, Biohazard, Smiley Face, or We the People logo. “GLOCK” is a federally registered trademark of Glock, Inc. and is one of many trademarks owned by Glock, Inc. or Glock Ges.m.b.H.  Brownells is an independent dealer of parts and accessories for Glock® pistols, and is not affiliated with or endorsed by Glock, Inc. or Glock Ges.m.b.H.  The use of Glock on this page is merely to advertise the sale of Glock parts or components.  As indicated in the product descriptions, not all parts and accessories on this site are official Glock products. Big Book Catalog, Issue:68, Page:238 Mini-Catalogs, Issue:01, Page:006 Personal Protection, Issue:01, Page:017

    HOT!
  • SLIDE RACKER G&B CUSTOM More Detail

    SLIDE RACKER G&B CUSTOM

    $36.99$36.99

    Easy Installation; Fits Right-Or Left-Hand ShootersProvides easier, no hassle slide racking for pistols equipped with frame-mounted optics. Can be installed for either right- or left-handed shooters; locks into 60 x .359" dovetail with Allen head set screw. Available in either lightweight aluminum or strong, durable stainless steel. > 1911, Issue:11, Page:003 Big Book Catalog, Issue:68, Page:101 Sinclair, Issue:1A, Page:003

    HOT!
  • RUGER® MARK SERIES BOLT RACKERS MAJESTIC ARMS, LTD. More Detail

    RUGER® MARK SERIES BOLT RACKERS MAJESTIC ARMS, LTD.

    $29.95$29.95

    The Majestic Arms Bolt Racker allows for effortless cocking of your Ruger® Mark series pistol. Lightweight aircraft grade aluminum Easy to install Can be mounted for right or left handed shooters Flat black anodized finish 2 types for different variations of production Type 1 fits Ruger  Mk I & II™ models Type 3 fits 2006-present production models of the Mk III™ as well as the 22/45™

    HOT!
  • EZ SLIDE RACKER SPRINGER PRECISION LLC More Detail

    EZ SLIDE RACKER SPRINGER PRECISION LLC

    $35.00$35.00

    Springer Precision has designed these slide rackers in both carry/duty and competition models for Glock and Springfield XD-XDm handguns. The Carry/Duty models feature a lip off both  sides of the slide to allow for easier grasp of the slide or to allow you to rack the slide off your belt, pocket or other objects. The Competition  models have one appoximately 1/2" lip off the left side of the slide for fast manipulations. Replaces your striker retainer plate.

    HOT!
  • TRI-SET COMPETITION SIGHT RIB - REAR ADJUSTING ARISTOCRAT More Detail

    TRI-SET COMPETITION SIGHT RIB - REAR ADJUSTING ARISTOCRAT

    $214.95$214.95

    Front & Rear Adjusting Ribs For Bull Barrel RevolversSlotted cam selects one of 3 pre-set positions for Rear Sight. Rear sight also has windage adjustment and an extra elevation screw to compensate for light or ammo changes. Big Book Catalog, Issue:68, Page:319

    HOT!
  • MKIII™ 22/45™ LCI INSERT TANDEMKROSS More Detail

    MKIII™ 22/45™ LCI INSERT TANDEMKROSS

    $19.99$19.99

    This high quality steel replacement insert for the 22/45™ and Mark III™ series pistol will allow you to remove the existing plastic parts which can simplify cleaning and can reduce feeding and ejection problems. Installs in minutes; this part ships with necessary set screw and allen wrench to get the job done.  Improve the appearance and make cleaning easy by upgrading your pistol today. Big Book Catalog, Issue:68, Page:223

    HOT!
  • RUGER® 22/45™ SLIDE RACKER TACTICAL SOLUTIONS, LLC More Detail

    RUGER® 22/45™ SLIDE RACKER TACTICAL SOLUTIONS, LLC

    $17.99$17.99

    This ambidextrous slide racker easily installs onto your Ruger® MK™ Series pisol without tools so you can easily rack your Ruger® pistol. The slide racker is makde of impact resistant Zytel insert, molded around a high carbon steel insert. The Bolt Racker was designed to fit the newer Ruger® 22/45™ and MK III™ series bolts with the tapered bolt ears. Instructions are included.

    HOT!
  • CZ75 KADET II 22LR CONVERSION KIT CZ USA More Detail

    CZ75 KADET II 22LR CONVERSION KIT CZ USA

    $430.99$430.99

    The CZ 75 Kadet conversion kit is a separate accessory for the CZ 75/85 pistol series allowing the firing of .22 LR caliber cartridges. The CZ 75 fitted with the Kadet .22LR conversion is the perfect training or plinking pistol with the slide weighted and balanced just like the CZ 75. The Kadet adapter features all-steel construction and an adjustable rear sight. Included are 2 10-round magazines that fit flush with grips of the full size CZ 75 and SP-01 models.  The Kadet conversion kit will work on the CZ 75 compact and sub-compact models including the 75 Compact, P-01, P-06,  PCR, and RAMI, but note that the full-size magazines will extend out of the bottom of the shorter grips on these models. The Kadet conversion will not work on the 97, 75 TS, P-07 or P-09 models. When used in competition-oriented or modified 75 series pistols like the Shadow, a factory-weight 75 mainspring may be required to provide proper primer ignition. Big Book Catalog, Issue:68, Page:220

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!