• VIPER® 1-4x24 PST RIFLE SCOPE VORTEX OPTICS More Detail

    VIPER® 1-4x24 PST RIFLE SCOPE VORTEX OPTICS

    $479.99 - $949.99$479.99 - $949.99

    Consistent Accuracy At Extreme Ranges In Harsh Environments & Stressful Situations One-piece 30mm tube machined from aircraft-grade aluminum for outstanding strength and rigidity Sealed, gas-purged, waterproof, dustproof, shockproof Fully coated lenses are protected with scratch-resistant ArmorTek™ coating Illuminated reticle has 10 intensity levels, with an “off” position between each setting EBR (Enhanced Battle Reticle) features subtension lines for ranging, holdover, and windage corrections MOA (Minute of Angle), with subtension lines that equal approximately 1.05" at 100 yards MRAD (milliradian) reticles have subtension lines equal approximately 3.6" at 100 yards FFP (First Focal Plane) models have reticle lines that stay valid at all magnifications Turret stops prevent turrets from traveling more than one revolution below the sight-in zero Dimensions: 2.5-10x44 – 12" (30.5cm) long. 18.4 oz. (522g) wt. 4-16x50 – 13" (33cm) long. 22 oz. (624g) wt. 6-24x50 – 15.5" (39cm) long. 23 oz. (652g) wt. All models powered by a single CR-2032 lithium battery (included)

    HOT!
  • TSR ALUMINUM RINGS TPS PRODUCTS, LLC. More Detail

    TSR ALUMINUM RINGS TPS PRODUCTS, LLC.

    $86.99 - $92.99$86.99 - $92.99

    Super Holding Power, Precision Alignment Maximum scope/ring contact to hold secure against recoil, precision machined to tolerances of .0002Four-screw cap lets you align & tighten without the scope rotatingMade in the U.S.A. Check out the 360° Image of the TSR "W" Rings.

    HOT!
  • M14/M1A TACTICAL SCOPE MOUNT SADLAK INDUSTRIES More Detail

    M14/M1A TACTICAL SCOPE MOUNT SADLAK INDUSTRIES

    $145.99 - $299.99$145.99 - $299.99

    Maximum Support, Superior Strength-To-Weight Ratio Helps keep the weight down when adding heavy tactical optics to your M14/M1A. Three-point design clamps down solidly, without alteration, to the side receiver ring, charger guide dovetail and receiver mount lug. Precision-cut rail includes 5º angle milled on the underside for easy case ejection without hang-ups; accepts Picatinny and Weaver-style rings. Open sight channel gives unobstructed view of back-up iron sights. Standard model is available in three strength-to-weight combinations. Steel model is fully machined from stress-relieved 4142 chrome-moly steel barstock, hardened to Rc 28-32 for maximum strength. Aluminum model is machined from 7075 bar stock aluminum and hardcoat anodized matte black for durability. Airborne model features a lightweight skeletonized frame with seven, 3/8" diameter CNC machined lightening holes in the top of the rail for reduced weight without sacrificing strength. Machined from chrome-moly steel bar stock and heat-treated to Rc 50 for superior strength. Mil-Spec Parkerized finish resists abrasion and corrosion. Adopted by the 101st Airborne.

    HOT!
  • RAZOR HD GEN II VORTEX OPTICS More Detail

    RAZOR HD GEN II VORTEX OPTICS

    $1,399.99$1,399.99

    The new frontrunners in the race for the ultimate precision, long-range optics. The Gen II Razors, designed and engineered for dialing precision long-range shots in extreme environments, have serious precision shooters saying "finally". The Gen II Razors feature a 6x zoom range, a 30 mm or 34 mm single-piece aircraft-grade aluminum tube and our sophisticated L-Tec turret system plus a host of additional high-performance features for state-of-the-art optics with deadly accuracy.

    HOT!
  • ACOG 4x32MM BAC RIFLE SCOPES TRIJICON More Detail

    ACOG 4x32MM BAC RIFLE SCOPES TRIJICON

    $1,277.00 - $1,512.99$1,277.00 - $1,512.99

    Advanced Combat Optical Gunsight Compact, 4x magnification scope clamps to a MIL-STD 1913 Picatinny receiver rail and features a bright, red Chevron reticle that is lit by both fiber optics and Tritium. Gives a vivid sight picture at distances up to 800 meters. Uses the Bindon Aiming concept (BAC) for excellent, both-eyes-open, target acquisition. Sight tunnel retains use of iron sights. TA31G - Green Donut .223 Ballistic Reticle, does not include Picatinny stype base required for mounting to rail. TA31F- Red chevron reticle with TA51Picatinny mount. TA31-CH- Red crosshair reticle with TA51Picatinny mount. TA31F-G- Green chevron reticle with TA51Picatinny mount. TA31H- Red horseshoe and dot reticle with TA51Picatinny mount. TA31H-G - Green horseshoe and dot reticle with TA51Picatinny mount. TA31-68- Red horseshoe and dot reticle with TA51Picatinny mount calibrated for 6.8SPC rifles.

    HOT!
  • AK47/AKM OPTIC MOUNT SYSTEM RS PRODUCTS LLC More Detail

    AK47/AKM OPTIC MOUNT SYSTEM RS PRODUCTS LLC

    $65.00 - $121.00$65.00 - $121.00

    Updated design allows for customization of the mounting platform. Option of three different lower mounts, with a full length lower rail, forward rail and rear rail. Placement of lower rail allows for optics to be positioned in the ideal location front to back, as well as right to left. Lightweight CNC machined aircraft grade 6061 T6 aluminum. Position optics in co-witness location. Allows field stripping of the rifle without removal of the optic on most AK variants. Redesigned thumb lever lock retains zero even after repeated optic removal and reinstallation. Ability to stake position for extreme duty. AKML allows the mounting of the Aimpoint T-1 and H-1 Micro Red Dot Optics AKOG allows the mounting of Trijicon ACOG sight systems

    HOT!
  • MAXIMIZED SCOPE RINGS BADGER ORDNANCE More Detail

    MAXIMIZED SCOPE RINGS BADGER ORDNANCE

    $169.99 - $189.99$169.99 - $189.99

    Securely Hold Large, Heavy Scopes On Hard-Recoiling Guns Gives 60% more holding power to keep scopes on .50 BMG riflesMade in the U.S.A.

    HOT!
  • PATROL RIFLE OPTIC (PRO) AIMPOINT More Detail

    PATROL RIFLE OPTIC (PRO) AIMPOINT

    $432.00$432.00

    Rugged, Reliable & Versatile - Always Ready Parallax-free, non-magnifying red dot sight is ready at all times, with no switches or levers to fumble with. Simply install the supplied battery, turn the PRO on, and forget about it – for up to 3 years! 2 MOA center-dot, with 6 daylight and 4 night vision brightness settings, enables accurate target engagement under a broad variety of conditions. Includes a detachable spacer that allows co-witnessing with the standard iron sights on AR-15/M16/M4 weapons. Or remove the spacer to install the PRO on shotguns or submachine guns. Integrated “rail-grabber” mount with knurled, oversized knob aids in quick attach/detach on Picatinny rails. Compatible with all generations of night vision devices; may also be used with Aimpoint 3x Magnifier and Concealed Engagement Unit. Flip-up lens caps included. Hard-anodized aluminum,  5¼” (13.3cm) OAL. 3” (7.6cm) high, including spacer. 13 oz. (368.g) wt.  Unlimited eye relief.  Waterproof to 150’ (45m) depth. One DL1/3N lithium battery, included.

    HOT!
  • MARK 4® LR/T RIFLE SCOPES LEUPOLD More Detail

    MARK 4® LR/T RIFLE SCOPES LEUPOLD

    $899.99 - $1,499.99$899.99 - $1,499.99

    30mm Tube, Variety Of Reticle Patterns & Repeatable Tracking For Long-Range Accuracy Variable-power tactical scopes have 30mm tubes, high-resolution optics, and repeatable tracking for superb long-range accuracy. Features side parallax adjustment for fast, easy focusing from 50 yards to infinity. Large, easy-to-grasp target turrets with repeatable tracking enable easy return-to-zero once you’re sighted in. M5-FF front focal plane scope maintains the exact spacing of the Mil-Dot subtensions regardless of the magnification selected. All other models are rear focal plane scopes that change subtension spacing at each magnification setting. M1/M5/Target models have ¼ MOA elevation/windage adjustments; M3 models have 1 MOA elevation and ½ MOA windage adjustments. Available with Mil-Dot, Illuminated Mil-Dot and Illuminated Tactical Milling Reticle (TMR) that is similar to a Mil-Dot reticle but with finer stadia for more precise range estimation.

    HOT!
  • ULTRALIGHT RINGS NIGHTFORCE More Detail

    ULTRALIGHT RINGS NIGHTFORCE

    $165.00$165.00

    Designed to fit Mil-Std. 1913 scope bases, Nightforce rings are precisely manufactured to match the machined recess of a Nightforce Mil-Std. 1913 base, providing perfect alignment and accuracy. Nightforce rings are designed and produced in-house to exacting specifications entirely out of steel or from 7075-T6 aluminum with beta series titanium crossbolts and jaws. All Nightforce rings are 100% micro-radiused and honed in pairs for perfect fit of 30mm scope tubes to prevent the possibility of the rings damaging your scope.

    HOT!
  • FASTFIRE III RED DOT REFLEX SIGHT BURRIS More Detail

    FASTFIRE III RED DOT REFLEX SIGHT BURRIS

    $239.00 - $249.00$239.00 - $249.00

    Fast, Precise Heads-Up Sighting; Ultra-Robust Design Handles Magnum-Power Recoil Same dependable red dot sight as the FastFire II with enhanced features, including a tactile pushbutton power switch with three controllable levels of brightness, plus an automatic brightness setting. Battery access from the top lets you change the battery without removing the sight from the gun. Low battery indicator and automatic power shutoff after 8 hours help keep you from running out of power at the wrong time. Windage and elevation adjustments can be made quickly with a coin - no special tool needed - with a 3° (190" at 100 yards) adjustment range. Available with 3 or 8 MOA dot, with or without quick-attach/detach Picatinny mount (also fits Weaver rails).

    HOT!
  • RMR ADJUSTABLE LED SIGHTS TRIJICON More Detail

    RMR ADJUSTABLE LED SIGHTS TRIJICON

    $602.00 - $691.00$602.00 - $691.00

    As tough as Trijicon’s legendary ACOG® scopes, the low-profile RMR™ (Ruggedized Miniature Reflex) sight enables fast, both-eyes-open, target acquisition—even in poor lighting conditions. Unlimited eye relief allows natural presentation from almost any shooting position, plus clear, unobstructed panoramic views for maximum situational awareness. Mount an RMR on your rifle to supplement your ACOG, and you’re ready to address targets at any range. Performs in the harshest operating conditions thanks to a computer-optimized geometric housing of high-strength, forged, military-grade, aluminum that absorbs shock and diverts stress away from the lens. Simple to operate, no switches to toggle, or forget to activate under stress, because the sight is always on. The True-Color 28-layer coated, non-magnifying lens delivers a crisp, clear shooting picture. Fully adjustable for windage and elevation, 1 MOA per audible click. Each RMR is pre-adjusted at the factory to be parallax-free at 50 meters. Adjustable LED models have eight reticle brightness levels that can be set manually, or the user can select auto mode that automatically selects the brightness suitable for ambient light conditions. All RMR models come shipped in a water-resistant, dustproof, and crushproof Pelican™ case.

    HOT!
  • PICATINNY SCOPE RINGS BROWNELLS More Detail

    PICATINNY SCOPE RINGS BROWNELLS

    $69.99 - $99.99$69.99 - $99.99

    Installs With Only A Flathead Screwdriver No special wrenches neededring is undercut with a rounded radius for easier finger tightening of nutfinal tighten with a standard socket or flat-blade screwdriverWont shift forward under recoil with large contact area for scope to prevent slippage even on heavy-recoiling, magnum riflesMade in the U.S.A.

    HOT!
  • NXS 8-32x56mm RIFLESCOPES NIGHTFORCE More Detail

    NXS 8-32x56mm RIFLESCOPES NIGHTFORCE

    $2,125.00$2,125.00

    Purpose-Built, Durable Precision Optics With 30mm Tubes Constructed to meet the specific needs of many different types of shooters, these top-quality precision optics come with a wide range of options. Each mil-spec bonded lens is matched and hand-aligned for optimal performance, while all air-to-glass surfaces receive Nightforce’s proprietary multi-coating. All scopes feature a glass-etched, illuminated reticle providing a crystal-clear, distortion-free image with tremendous reliability in any lighting condition. Some models offer ZeroStop™ adjustment for quick return-to-zero without counting clicks or looking at the turret. NP-R2 reticle is a mil-style reticle with 2 MOA elevation and 5 MOA hash mark windage measurements. MLR reticle displays ½-mil hash marks on both windage and elevation bars. Mil-Dot reticle consists of see-through dots and posts in order to provide the clearest, obstruction free sight picture. Mil-Dot reticle is designed for field tactical and long-range field applications. Unlike many MIL-DOT reticles, this design features a hollow dot that will not obscure the target. This reticle is designed for fast range estimation and target acquisition in tactical situations. NP-R1 reticle is an improved version of the NP-R2, providing the user with 1 MOA measurements on the elevation bar and 2 MOA measurements on the windage bar. This improved reticle design allows the shooter to range easily and accurately. NP-R2 reticle is an especially good choice for long-range applications. 2 M.O.A. vertical increments allow accurate rangefinding and multiple zero and hold points to compensate for windage and bullet drop. MOAR reticle is Nightforce’s latest advancement in precision shooting. It features a floating center crosshair two MOA wide and two MOA tall, providing a precise aiming point, especially on smaller targets at longer ranges. The MOAR also has one-MOA elevation and windage spacings, which provide accurate rangefinding and hold-offs compared to ordinary reticles with coarser markings. Cannot ship out of the US. To choose the correct reticle, enter ballistic information into the calculator at www.nightforcereticlecalculator.com.

    HOT!
  • RMR LED SIGHTS TRIJICON More Detail

    RMR LED SIGHTS TRIJICON

    $557.00$557.00

    Compact, Ruggedized Red Dot Sight System For Fast, Accurate Targeting As tough as Trijicon’s legendary ACOG® scopes, the low-profile RMR™ (Ruggedized Miniature Reflex) sight enables fast, both-eyes-open, target acquisition—even in poor lighting conditions. Unlimited eye relief allows natural presentation from almost any shooting position, plus clear, unobstructed panoramic views for maximum situational awareness. Mount an RMR on your rifle to supplement your ACOG, and you’re ready to address targets at any range. Performs in the harshest operating conditions thanks to a computer-optimized geometric housing of high-strength, forged, military-grade, aluminum that absorbs shock and diverts stress away from the lens. Simple to operate, no switches to toggle, or forget to activate under stress, because the sight is always on. The True-Color 28-layer coated, non-magnifying lens delivers a crisp, clear shooting picture. Fully adjustable for windage and elevation, 1 MOA per audible click. Each RMR is pre-adjusted at the factory to be parallax-free at 50 meters. LED models run over 17,000 hours on one CR-2032 lithium battery (included) or up to 4 years in dark storage. All RMR models come shipped in a water-resistant, dustproof, and crushproof Pelican™ case.

    HOT!
  • AK-47 SCOUT MOUNT ULTIMAK More Detail

    AK-47 SCOUT MOUNT ULTIMAK

    $94.99$94.99

    Scout Mount is constructed of one-piece, 6061-T6 hard anodized aluminum and a single MIL-STD 1913 Picatinny rail for mounting optics and accessories. Mount replaces the gas tube and attaches directly to the barrel with 4140 steel clamps for stability and accuracy. Includes vent holes near front end. Mounting tools and instructions included. No gunsmithing needed.

    HOT!
  • ULTRALIGHT SCOPE MOUNT AERO PRECISION More Detail

    ULTRALIGHT SCOPE MOUNT AERO PRECISION

    $79.99$79.99

    Featuring a rigid, lightweight design, Aero Precisions Ultralight Scope Mounts complement many high-end optic platforms. Features Designed for AR type upper receivers 6061 T6 extruded aluminium construction MIL-A-Type 3 black hard-coat anodized Ridged and lightweight Weighs 3.1-3.3 ounces

    HOT!
  • MARK 4 RINGS & BASES LEUPOLD More Detail

    MARK 4 RINGS & BASES LEUPOLD

    $139.99$139.99

    Heavy-Duty Mounts For Extreme Field & Tactical Use Withstand extreme service without movement or loss of zero/li>Reduce scope movement with extra-large contact area between the scope/rings and base/receiverEasy adjustment with large hex nuts on rings for fast torquing of cross boltsMounting screws & Torx head wrench includedSteel Rings - CNC machined from solid 11L17 cold-rolled bar stock, then blued. Aluminum Rings CNC machined from 7075 T651 aluminum alloy and hardcoat anodized for maximum strength and wear resistance.

    HOT!
  • RMR DUAL-ILLUMINATION SIGHTS TRIJICON More Detail

    RMR DUAL-ILLUMINATION SIGHTS TRIJICON

    $491.00$491.00

    Compact, Ruggedized Red Dot Sight System For Fast, Accurate Targeting As tough as Trijicon’s legendary ACOG® scopes, the low-profile RMR™ (Ruggedized Miniature Reflex) sight enables fast, both-eyes-open, target acquisition—even in poor lighting conditions. Unlimited eye relief allows natural presentation from almost any shooting position, plus clear, unobstructed panoramic views for maximum situational awareness. Mount an RMR on your rifle to supplement your ACOG, and you’re ready to address targets at any range. Performs in the harshest operating conditions thanks to a computer-optimized geometric housing of high-strength, forged, military-grade, aluminum that absorbs shock and diverts stress away from the lens. Simple to operate, no switches to toggle, or forget to activate under stress, because the sight is always on. The True-Color 28-layer coated, non-magnifying lens delivers a crisp, clear shooting picture. Fully adjustable for windage and elevation, 1 MOA per audible click. Each RMR is pre-adjusted at the factory to be parallax-free at 50 meters. Battery-free Dual-Illuminated models use a combination of powerful, light-gathering fiber optics and self-illuminating Tritium to project a bright amber dot on the sight in any light conditions from pitch darkness to broad daylight. Automatically adjusts brightness and contrast of reticle to ambient light. All RMR models come shipped in a water-resistant, dustproof, and crushproof Pelican™ case.

    HOT!
  • NXS 5.5-22X56MM SCOPES NIGHTFORCE More Detail

    NXS 5.5-22X56MM SCOPES NIGHTFORCE

    $2,028.00$2,028.00

    MOAR reticle is Nightforce’s latest advancement in precision shooting.  It features a floating center crosshair two MOA wide and two MOA tall, providing a precise aiming point, especially on smaller targets at longer ranges.  The MOAR also has one-MOA elevation and windage spacings, which provide accurate rangefinding and hold-offs compared to ordinary reticles with coarser markings. 

    HOT!
  • VORTEX PRECISION MATCHED RIFLESCOPE RINGS VORTEX OPTICS More Detail

    VORTEX PRECISION MATCHED RIFLESCOPE RINGS VORTEX OPTICS

    $149.99$149.99

    Vortex Optics starts with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using their precision Computer Numeric Controlled (CNC) mill. These Precision Matched Rings are kept in pairs throughout the manufacturing process - ensuring perfection from one set to another. These Vortex rings are then serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize. Rugged, lightweight, anti-snag design Robust, Grade 8 fasteners 100% made in USA guaranteed for life

    HOT!
  • Z6I ILLUMINATED RIFLESCOPES SWAROVSKI More Detail

    Z6I ILLUMINATED RIFLESCOPES SWAROVSKI

    $2,599.00 - $3,379.00$2,599.00 - $3,379.00

    The improved slim design and the advanced functions bring the well-established optical superiority of the Z6I rifle scopes to perfection: The newly designed mechanisms on the Ballistic Turret and the Parallax Turret optimize their handling. The rifle scopes of the Z6- 2nd generation are available in eight different models. Whatever your intended use, you are sure to find the perfect rifle scope for your requirements. Thanks to the 6x zoom, all models offer a high degree of flexibility that also extends beyond their specific intended use. Features 6x zoom in a 30mm tube, outstanding field of view, centered reticle in the second image plane, ultra-precise adjustment turrets and guaranteed shock resistance, even with high caliber firearms, parallax correction locked in at 109yrds (100m), zero-point adjustment without tools, watertight to a depth of 13 ft, nitrogen filled, and easy to use magnification adjustment ring. Optimized, slimmer illumination unit provides unrestricted view and SWAROLIGHT automatic shut-off with inlination sensor helps increase battery life. All scopes are supplied with transparent protective caps, battery for reticle illumination, spare battery holder with spare battery and BT tool. Swarovski Z6(i) 5-30x50 (30mm Tube) This specialized long-range scope features a ballistic turret that you can set to match your particular cartridge and load at any range. The turret holds three color-coded range settings, and more range settings can be quickly calculated using the BT Ballistic Calculator on the Swarovski website. The 4A-I reticle has fine crosshairs with illuminated center dot for instant target acquisition. Just range, dial and shoot.  Eye relief: 3.74". FOV: 23 ft @ 100 yards. 15.5" length. 21.2 oz. wt. Matte black finish.

    HOT!
  • MARK AR™ MOD 1 RIFLESCOPES LEUPOLD More Detail

    MARK AR™ MOD 1 RIFLESCOPES LEUPOLD

    $349.99 - $549.99$349.99 - $549.99

    Leupold’s Mark AR MOD 1 scopes have variable power settings for fast, accurate engagement of close and distant targets. Perfect for AR-15s because the P5 BDC dial aids in precise aiming with .223/5.56 NATO loads, though these scopes also work very well on traditional bolt-actions, too. Leupold’s Quantum Optical System™ and proprietary Multicoat® lens coatings combine to deliver optimal brightness, contrast, and edge-to-edge clarity in all light conditions. Purged with a unique Argon/Krypton gas blend, these scopes are waterproof and highly resistant to damage from shock. Duplex/Fine Duplex reticles are standard crosshair-style reticles. Mil-Dot reticle is a standard mil-based reticle. FireDot SPR™ (Special Purpose Reticle) features an illuminated green center-dot with a range estimating circle, plus holdover hash marks out to 850 meters. FireDot TMR™ reticle has a green illuminated center-dot, plus windage and holdover hash marks to assist with longer-distance targeting. Both illuminated models feature 6 brightness-intensity settings for quick target acquisition – day or night. Aluminum tube, matte black finish, 1" O.D. Illuminated models use a CR-2032 battery, included. AO - Adjustable Objective.

    HOT!
  • COMPM4S OPTICAL SIGHT AIMPOINT More Detail

    COMPM4S OPTICAL SIGHT AIMPOINT

    $863.00$863.00

    Parallax-free aiming with a single, bright glowing red dot; proven to be the fastest, most accurate sighting system available. Exclusive Advanced Circuit Efficiency Technology (ACET) greatly improves the useable life of the single 3-volt battery. ACET sights can last nearly 50,000 hours (over five years on setting 7 out of 10) of constant use. AA battery model can last up to 80,000 hours with a single battery. All sight housings are machined, or extruded from 6000 series aluminum for maximum strength. Lens surfaces are optically ground (not cast) for superior clarity. Proprietary housing and lens sealing material keeps electronic and lens surfaces dry, fog-free and fully functional regardless of weather conditions. All models feature non-reflective, Mil-Spec anodized finishes. The latest civilian version of the U.S. Army’s M68 CCO (Close Combat Optic), and the most advanced sight produced by Aimpoint. Super efficient electronics deliver up to eight years of continuous use from a single AA battery. Optics feature band pass objective lens coating for superb light transmission and optimum 3rd generation NVD compatibility. Newly improved rotary brightness switch provides 7 NVD settings and 9 daylight settings, plus one extra-bright setting for outdoor use with anti-reflective goggles. Excellent choice for varmint hunters needing a rugged red dot optic with low light capabilities. Integral, QRP2 mount (no additional mount ring required) features a single, oversize thumbscrew for fast installation and removal from Picatinny rails. Mount includes a separate vertical spacer for fast adaptation to a wide range of firearms. Available with versatile 2MOA dot. Can be quickly converted to a 3X, long-range red dot reticle scope by installing the optional Aimpoint 3XMag magnifying module listed below. COMPM4S has the same great operating features as the COMPM4, but positions the battery compartment low, on the right side of the unit for less chance of snagging and improved view over the top of the optic.

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!