• RIFLE BRASS LAPUA More Detail

    RIFLE BRASS LAPUA

    $62.99 - $289.99$62.99 - $289.99

    Many shooters have found Lapua brass to be considerably superior in quality to most other brass available. All Lapua cases are strong and uniformly precise. Lapua cases are manufactured to be reloaded, again and again, dozens of times. The base section is hard and strong, and the dimensions remain constant and will hold primers tight in the primer pocket even after repeated reloading. The brass body section is hard and firm. It is easy to extract after firing, whether full length sizing or only neck sizing. Strict tolerances in concentricity and wall thickness are used in manufacturing. The neck and shoulder are annealed to withstand repeated reloading. Packaged in a plastic case, 100 cases per package. Brownells Christmas , Issue:5X, Page:018 Big Book Catalog, Issue:68, Page:543 Mini-Catalogs, Issue:15, Page:020 Sinclair, Issue:5B, Page:120

    HOT!
  • STAINLESS ULTIMATE TRIMMER SINCLAIR/L.E. WILSON More Detail

    STAINLESS ULTIMATE TRIMMER SINCLAIR/L.E. WILSON

    $189.99$189.99

    The legendary L.E. Wilson Case Trimmer has just gotten better. Exclusive to Sinclair International, the L.E. Wilson Case Trimmer is now offered in a Stainless Steel model. We’ve paired the most accurate trimmer in the world with our Sinclair Micrometer head to create the Sinclair Stainless Ultimate Trimmer. The L.E. Wilson Case Trimmer aligns and holds your cases square to the cutter during the trim process. This results in a virtually identical trim length for each case. It is accomplished with L.E. Wilson’s unique case holder system which holds the case by the body taper. The trimmer case holder, cutter housing, and micrometer adjustment unit sit in perfect alignment. No pilots or collets are utilized which could influence the trim results negatively. Now in stainless steel, the L.E. Wilson Trimmer is built to last for a lifetime of use. Our Sinclair Micrometer head allows the reloader to easily adjust trim length in increments of .001" with an adjustment length of over 2". Our micrometer reads in “actual” case length, making it the most pleasurable micro trimmer to work with. Determine your trim length, dial to the exact length on the micrometer, and you’re ready – it’s that simple. The micrometer features crisp, easy-to-read engravings and may be locked in place when set. Easily accommodates cases from 22 Hornet to 416 Rigby. When trimming cases shorter than 1.3” such as pistol cases, the use of a spacer (#749-002-094) is necessary. Completing the Sinclair Stainless Ultimate Trimmer is our Sinclair Mounting Stand with Shark Fin Clamp. This system makes easy work of installing and removing your trimmer case holder in a smooth “swing-arm” motion. The Shark Fin trimmer clamp secures the case head firmly against the micrometer adjustment head for a quick and accurate, chatter-free trim. * Trimmer Case Holders and accessories sold separately. Brownells Christmas , Issue:4X, Page:018 Big Book Catalog, Issue:68, Page:529 Mini-Catalogs, Issue:15, Page:017 Sinclair, Issue:5B, Page:010

    HOT!
  • BRASS 100 CT BAGS NORMA More Detail

    BRASS 100 CT BAGS NORMA

    $63.99 - $234.99$63.99 - $234.99

    Norma Brass provides the serious reloader a premium grade, quality cartridge to reload. Norma Brass is bulk packed from the same lot. We try to keep a good supply of brass in inventory, but due to factory production and delivery delays, we may occasionally be out of some cartridges. Norma Brass is made to such exact standards that the cartridges typically include machined case heads, drilled (not punched) flash holes and close tolerance wall thickness. Brass is packaged in 100 count bags. Brownells Christmas , Issue:5X, Page:019 Big Book Catalog, Issue:68, Page:543 Mini-Catalogs, Issue:15, Page:020 Sinclair, Issue:5B, Page:120

    HOT!
  • BERGER TARGET BULLETS BERGER BULLETS More Detail

    BERGER TARGET BULLETS BERGER BULLETS

    $27.99 - $349.99$27.99 - $349.99

    The Berger Target bullet line is made up of the many legendary bullets that have been winning matches and setting records for decades. Berger Bullets was started because Walt Berger wanted better results while competing in target shooting matches. Making Match Grade bullets for target competition shooters is Berger's core competency. All of Berger's success as the producer of consistent bullets for Varmint, Target and Hunting stems from the efforts Berger has made to produce the best bullets available for the extreme, precision focused, target competition shooter. Brownells Christmas , Issue:5X, Page:018 Big Book Catalog, Issue:68, Page:541 Mini-Catalogs, Issue:15, Page:021 Sinclair, Issue:5B, Page:102

    HOT!
  • BULK RIFLE BULLETS HORNADY More Detail

    BULK RIFLE BULLETS HORNADY

    $399.99 - $859.99$399.99 - $859.99

    Hornady bulk rifle bullets are great for target practice as well as varmint shooting and plinking. These bullets feature a copper jacket with a lead core. Available in popular calibers for high volume shooters. Shoot more with these inexpensive bulk bullets!

    HOT!
  • SINCLAIR CONCENTRICITY GAUGE SINCLAIR INTERNATIONAL More Detail

    SINCLAIR CONCENTRICITY GAUGE SINCLAIR INTERNATIONAL

    $89.99 - $149.99$89.99 - $149.99

    We believe the Sinclair Concentricity Gauge is the easiest to use and most accurate gauge of its kind on the market. Precision made for a lifetime of use, the Sinclair Concentricity Gauge will accept cases up to 50 BMG. The Sinclair Concentricity Gauge is used to measure runout by rotating the case or loaded round on two sets of bearings that are captured in anodized aluminum blocks. These bearing blocks are adjustable longitudinally to allow for different case lengths or varying lengths of loaded rounds. The handloader can measure sized cases on the neck, and measure loaded rounds on the neck or out on the bullet. The bearing blocks ride in a milled slot in the gauge base plate. This milled slot keeps the blocks in alignment with each other. This arrangement provides the best support for the cartridge, enabling the user to spin the cartridge smoothly. Large thumb levers on the bearing blocks make adjustments quick and easy. The anodized base plate is extremely stable allowing the user to take accurate readings. The indicator tower is designed to permit vertical and side-to-side adjustment of the dial indicator. The mounting block for the dial indicator is designed to accommodate dial indicators with standard 0.375" mounts. This is a quality measuring tool for the serious precision reloader. Big Book Catalog, Issue:68, Page:532 Mini-Catalogs, Issue:15, Page:017 Sinclair, Issue:5B, Page:029

    HOT!
  • UNPRIMED RIFLE BRASS HORNADY More Detail

    UNPRIMED RIFLE BRASS HORNADY

    $26.99 - $99.99$26.99 - $99.99

    Hornady unprimed brass features tight tolerances, uniform concentricity, consistent weight and capacity. Their manufacturing processes ensure consistent bullet seating and uniform bullet release for optimal velocity and accuracy. Target shooters insist on uniform case wall thickness and tight tolerances. Hornady delivers this by treating brass as the foundation for an accurate cartridge, not as a commodity. Brownells Christmas , Issue:5X, Page:011 Big Book Catalog, Issue:68, Page:543 Mini-Catalogs, Issue:15, Page:020 Sinclair, Issue:5B, Page:119

    HOT!
  • T-7 TURRET PRESS REDDING More Detail

    T-7 TURRET PRESS REDDING

    $18.99 - $299.99$18.99 - $299.99

    The T-7 Turret Press features a seven station turret head, cast iron construction, and powerful compound linkage. Its rear casting supports a rock solid turret for precise alignment. The T-7 incorporates a one inch diameter ram and accepts 7/8 inch to fourteen inch threaded dies, including the longer Competition dies. Additional interchangeable turret heads may be purchased. This is the only turret press we recommend buying. The Automatic Primer Feed Assembly sold separately. 1911, Issue:11, Page:067 Brownells Christmas , Issue:4X, Page:017 Big Book Catalog, Issue:68, Page:536 Mini-Catalogs, Issue:15, Page:019 Sinclair, Issue:5B, Page:059

    HOT!
  • SIERRA MATCHKING BULLETS SIERRA BULLETS, INC. More Detail

    SIERRA MATCHKING BULLETS SIERRA BULLETS, INC.

    $14.79 - $216.99$14.79 - $216.99

    For serious rifle competition, you'll be in championship company with MatchKing® bullets. The hollow point boat tail design provides that extra margin of ballistic performance match shooters need to fire at long ranges under adverse conditions. Big Book Catalog, Issue:68, Page:542 Mini-Catalogs, Issue:15, Page:021 Sinclair, Issue:5B, Page:100 Sinclair, Issue:5B, Page:101

    HOT!
  • NOSLER BRASS NOSLER, INC. More Detail

    NOSLER BRASS NOSLER, INC.

    $34.99 - $84.99$34.99 - $84.99

    Nosler takes a few extra steps with their brass to make it a premium component for the handloader. The brass is first weigh-sorted to within + or - 0.5 grains, then the flash holes are deburred. Nosler completes the case prep with neck sizing and chamfering the inside and outside of the case mouth. All Nosler unprimed brass bears the Nosler headstamp. Sold in boxes of 50 unless stated otherwise. Big Book Catalog, Issue:68, Page:543 Sinclair, Issue:5B, Page:120

    HOT!
  • WILSON CASE GAGE L.E. WILSON, INC. More Detail

    WILSON CASE GAGE L.E. WILSON, INC.

    $26.99 - $46.99$26.99 - $46.99

    The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY Brownells Christmas , Issue:4X, Page:019 Big Book Catalog, Issue:68, Page:532 Mini-Catalogs, Issue:15, Page:019 Sinclair, Issue:5B, Page:035 Sinclair, Issue:5B, Page:079

    HOT!
  • ULTIMATE TRIMMER & PLATFORM KIT SINCLAIR/L.E. WILSON More Detail

    ULTIMATE TRIMMER & PLATFORM KIT SINCLAIR/L.E. WILSON

    $199.99$199.99

    SINCLAIR STAINLESS ULTIMATE TRIMMER - The legendary L.E. Wilson Case Trimmer has just gotten better. Exclusive to Sinclair International, the L.E. Wilson Case Trimmer is now offered in a Stainless Steel model. We’ve paired the most accurate trimmer in the world with our Sinclair Micrometer head to create the Sinclair Stainless Ultimate Trimmer. The L.E. Wilson Case Trimmer aligns and holds your cases square to the cutter during the trim process. This results in a virtually identical trim length for each case. It is accomplished with L.E. Wilson’s unique case holder system which holds the case by the body taper. The trimmer case holder, cutter housing, and micrometer adjustment unit sit in perfect alignment. No pilots or collets are utilized which could influence the trim results negatively. Now in stainless steel, the L.E. Wilson Trimmer is built to last for a lifetime of use. Our Sinclair Micrometer head allows the reloader to easily adjust trim length in increments of .001" with an adjustment length of over 2". Our micrometer reads in “actual” case length, making it the most pleasurable micro trimmer to work with. Determine your trim length, dial to the exact length on the micrometer, and you’re ready – it’s that simple. The micrometer features crisp, easy-to-read engravings and may be locked in place when set. Easily accommodates cases from 22 Hornet to 416 Rigby. When trimming cases shorter than 1.3” such as pistol cases, the use of a spacer (part number WX11) is necessary. Completing the Sinclair Stainless Ultimate Trimmer is our Sinclair Mounting Stand with Shark Fin Clamp. This system makes easy work of installing and removing your trimmer case holder in a smooth “swing-arm” motion. The Shark Fin trimmer clamp secures the case head firmly against the micrometer adjustment head for a quick and accurate, chatter-free trim. * Trimmer Case Holders and accessories sold separately. PLATFORM - The idea for this platform originated from a writer/customer of ours. The platform is a mounting board for the L.E. Wilson trimmer series that provides storage space for nine (9) case holders and a tapping block for knocking the cases out of the holder. The polyethylene platform has rubber feet, but most of us prefer it c-clamped to the bench. Brownells Christmas , Issue:4X, Page:018 Big Book Catalog, Issue:68, Page:529 Mini-Catalogs, Issue:15, Page:017 Sinclair, Issue:5B, Page:010

    HOT!
  • TYPE S MATCH BUSHING FULL DIE SETS REDDING More Detail

    TYPE S MATCH BUSHING FULL DIE SETS REDDING

    $161.99 - $239.99$161.99 - $239.99

    The Redding Type S Match Bushing Full Die Set contains a Type S Bushing Full Sizing Die and a Compeition Seating Die. The Type S Bushing Full Die allows full length resizing while maintaining exact control of the case neck. Interchangeable bushings allow you to determine your own level of sizing and neck tension. The Competition Bullet Seating Die features a micrometer calibrated in .001" increments and floating seating stem system which help eliminate concentricity problems.   Big Book Catalog, Issue:68, Page:534 Mini-Catalogs, Issue:15, Page:018 Sinclair, Issue:5B, Page:038

    HOT!
  • ELD-X BULLETS HORNADY More Detail

    ELD-X BULLETS HORNADY

    $36.79 - $40.99$36.79 - $40.99

    The ELD-X™ bullet is a technologically advanced, match accurate, ALL-RANGE hunting bullet featuring highest-in-class ballistic coefficients and consistent, controlled expansion at ALL practical hunting distances. All manufacturers conventional polymer tips in high BC bullets melt in flight.Hornady® engineers discovered that conventional bullet tip materials in streamlined, high BC bullets melt and deform. Although not a significant issue affecting moderate BC conventional tipped varmint and hunting bullets, aerodynamic heating causes BC reduction and degradation of accuracy, particularly at extended ranges (400 yds +). To counter this effect, Hornady® identified a heat resistant polymer and developed the patent pending Heat Shield™ tip. This revolutionary new tip creates the perfect meplat (tip) with exceptionally consistent results from bullet-to-bullet and lot-to-lot. At conventional range (0-400 yards), the ELD-X bullet is designed to continually expand throughout its penetration path. Upon impact the thin nose section of the bullet peels back and sheds material until it reaches the thick shank of the bullet jacket where the InterLock ring works to keep the core and jacket together. The remaining heavy shank of the bullet continues to drive forward and expand for extremely lethal results.

    HOT!
  • STARLINE BRASS STARLINE, INC More Detail

    STARLINE BRASS STARLINE, INC

    $16.99 - $83.99$16.99 - $83.99

    A great shot starts with Starline Brass the maker of America's finest straight wall brass. Starline prides itself on being the choice of top handgun shooters across all disciplines, with a production process focused on quality not quantity. Packaged in 100 count bags. 1911, Issue:11, Page:070 Brownells Christmas , Issue:5X, Page:011 Big Book Catalog, Issue:68, Page:541 Sinclair, Issue:5B, Page:119

    HOT!
  • COMPETITION BUSHING NECK DIE SETS REDDING More Detail

    COMPETITION BUSHING NECK DIE SETS REDDING

    $239.99 - $341.99$239.99 - $341.99

    Redding Competition Bushing Neck Die Set includes a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater. Neck Sizing Die and Seater feature micrometer adjustments. Bushings and Shellholder sold separately. Competition Bushing Neck Die -  With this die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chambered, sliding sleeve as it moves upward while the resizing bushing self-centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a linear support much like that of a firing pin. Meanwhile, the micrometer adjustment of the bushing position delivers precise control to the desired amount of neck length to be sized. Body Die -designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. Competition Bullet Seater - Tighter manufacturing tolerances have been made possible due to the details of the floating seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to "float" Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:036 Sinclair, Issue:5B, Page:038

    HOT!
  • CHARGEMASTER POWDER DISPENSER / SCALE COMBO RCBS More Detail

    CHARGEMASTER POWDER DISPENSER / SCALE COMBO RCBS

    $349.99 - $389.99$349.99 - $389.99

    Throws Precise, Consistent Powder Charges; Programmable Memory Stores Your Favorite Loads Automated powder measure system combines two precision RCBS products – the Chargemaster 1500 Scale and Chargemaster Automatic Powder Dispenser – that let you meter out exact charges of smokeless powder for almost any-size cartridge. Accurately weighs and dispenses from 2 to 300 grains of any extruded (stick), ball (spherical), and flake smokeless powder. Not only accurate but fast, too, for a “trickle” dispenser: average dispensing time is about 20 seconds for a 60 grain extruded powder charge.    Electronic control lets you simply punch in the exact-size charge you need – and stores up to 30 of your favorite loads in memory for instant recall. The front-to-back layout allows easy access to the scale for right or left-handed users. The clear cover eliminates fluctuations in charge weight caused by air currents. Powder drain lets you easily empty the powder hopper.    Power to the scale is provided by a direct connection from the dispenser to the scale, so there’s is only one power cord to wrangle. If you already own a Chargemaster 1500 scale, the dispenser may be purchased separately. Do not use with black powder. 1911, Issue:11, Page:068 Brownells Christmas , Issue:3X, Page:013 Big Book Catalog, Issue:68, Page:538 Mini-Catalogs, Issue:15, Page:019 Sinclair, Issue:5B, Page:007 Sinclair, Issue:5B, Page:088

    HOT!
  • TYPE S BUSHING FULL DIES REDDING More Detail

    TYPE S BUSHING FULL DIES REDDING

    $59.99 - $159.99$59.99 - $159.99

    Full Length resizing while maintaining exact control of the case neck is oftern desirable in one operation. The Redding Type S Bushing Full Length Sizing Dies accomplish this task with the precision you would expect from Redding. Uses the same interchangeable bushings as those used in Redding bushing style neck sizing dies. The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desired Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case All Type S dies are supplied with both the standard size button and a decapping pin retainer. By removing the bushing and all internal parts, the Type S Bushing Full Die may also be used as a body die.   Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:038 Sinclair, Issue:5B, Page:044

    HOT!
  • CO-AX RELOADING PRESS FORSTER More Detail

    CO-AX RELOADING PRESS FORSTER

    $299.99$299.99

    This heavy duty press has several innovative features that make it one of the best reloading presses for threaded dies on the market. The design includes: 1) Snap-in, snap-out die change making die changing a two second operation, 2) Automatic self-acting shellholder which supports the case by spring loaded jaws, 3) Positive spent primer catcher collects spent primers and carbon in a container. This press can be used with all standard 7⁄8"-14 dies (many of them with existing lock rings). Works with all Redding Competition Dies. Big Book Catalog, Issue:68, Page:535 Mini-Catalogs, Issue:15, Page:019 Sinclair, Issue:5B, Page:048 Sinclair, Issue:5B, Page:062

    HOT!
  • DELUXE 3-DIE SETS REDDING More Detail

    DELUXE 3-DIE SETS REDDING

    $74.99 - $279.99$74.99 - $279.99

    The Redding Deluxe Die Sets include the full length sizing die, standard seating die and the neck sizing die. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Guaranteed to produce ammunition that will properly fit any standard (SAAMI) chamber. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging, the come in a handy die box with a spare decapping pin, hex wrench and a place for your shellholder (sold separately). Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:040 Sinclair, Issue:5B, Page:041 Sinclair, Issue:5B, Page:045

    HOT!
  • BERGER HUNTING BULLETS BERGER BULLETS More Detail

    BERGER HUNTING BULLETS BERGER BULLETS

    $34.99 - $259.99$34.99 - $259.99

    The Berger Hunting bullet line is proving to be the most lethal big game hunting bullets available. All of the Berger Hunting bullets are made in the VLD design. The VLD design incorporates a sharp nose that allows the bullet to penetrate 2” to 3” before it starts to expand. After the bullet starts to expand it will shed 40% to 85% of its weight as shrapnel into the surrounding tissue (internal organ). The combination between the shrapnel and the hydrostatic shock produces a massive wound cavity within the vital area (internal organs) that will be 13” to 15” long. This massive wound cavity results in the animal dropping fast since most go into shock after such a tremendous blow. Those animals that don’t go down immediately will soon succumb to blood pressure loss and/or organ failure producing a quick ethical kill. Berger bullets don't poke through like an arrow (high weight retention, deep penetration bullets) but instead dump their energy where it is most effective, inside the animal. Using the Berger VLD will result in an animal that goes down fast so you can enjoy the results of your hunt without having to track the wounded animal after the shot. Big Book Catalog, Issue:68, Page:541 Sinclair, Issue:5B, Page:103

    HOT!
  • BULK BULLETS SIERRA BULLETS, INC. More Detail

    BULK BULLETS SIERRA BULLETS, INC.

    $103.99 - $399.99$103.99 - $399.99

    Money-Saving 500-Count Paks Of Popular Varmint & Competition Bullets A favorite of match shooters and hunters for years, Sierra bullets give the quality and superior ballistic performance you need for superb accuracy from your reloads. Available in a variety of calibers and profiles, Sierra helps you match the bullet to your particular shooting situation. Bullets in each pak come from the same production lot for best load-to-load consistency. Brownells Christmas , Issue:4X, Page:018 Big Book Catalog, Issue:68, Page:542 Mini-Catalogs, Issue:15, Page:021 Sinclair, Issue:5B, Page:101

    HOT!
  • WILSON TRIMMER CASE HOLDERS, RIFLE CARTRIDGES L.E. WILSON, INC. More Detail

    WILSON TRIMMER CASE HOLDERS, RIFLE CARTRIDGES L.E. WILSON, INC.

    $11.49 - $12.99$11.49 - $12.99

    Wilson Case Holders hold the case square to the cutter face for trimming as well as inside neck reaming, case mouth deburring, and military crimp removal. Standard Rifle Case Holders Holds the case securely on the body taper. Sinclair, Issue:5B, Page:012

    HOT!
  • 76 STYLE TITANIUM NITRIDE BUSHINGS - .306 TO .368 REDDING More Detail

    76 STYLE TITANIUM NITRIDE BUSHINGS - .306 TO .368 REDDING

    $27.29 - $27.49$27.29 - $27.49

    Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 Determining Redding Bushing Size The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet. If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip. Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip. Sinclair, Issue:1B, Page:043

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!