• AR-15/M16 MOE+ GRIP MAGPUL More Detail

    AR-15/M16 MOE+ GRIP MAGPUL

    $22.75$22.75

    Rubber-Coated Surface Provides Maximum Control In Adverse EnvironmentsSame contours and hard-molded polymer construction as the original MOE Grip. Durable, economical, easy-to-install replacement for factory pistol grip that gives the shooter a solid, secure grasp. Rigid, fully supported one-piece construction from the same reinforced, high-impact polymer as the MIAD grip, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap. Curved beavertail similar to the MIAD B2 insert fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of your hand during sustained firing.The MOE+ Grip has the addition of an anti-slip overmolded rubber coating for enhanced weapon control in wet conditions or when hand is sweaty. A polymer cap storage secures small items inside the internal compartment, and the MOE+ accepts Magpul MIAD grip cores (sold separately). AR-15, Issue:11, Page:057 Big Book Catalog, Issue:68, Page:055 Law Enforcement / Police Store, Issue:13, Page:014 Mini-Catalogs, Issue:13, Page:015

    HOT!
  • AR-15/M16 AFG2 ANGLED FORE GRIP MAGPUL More Detail

    AR-15/M16 AFG2 ANGLED FORE GRIP MAGPUL

    $33.20$33.20

    Low-profile forward grip/hand stop takes advantage of natural body mechanics to give the shooter more precise control, faster pointing, and less operator fatigue. The Magpul AFG™ (Angled Fore Grip) positions the support hand close to the centerline of the bore for maximum recoil control to aid in fast, accurate follow-up shots. Provides a consistent reference point for finding the correct hand position quickly when mounting the weapon under stress. The natural, ergonomic hand position with the palm facing up results in better blood flow than the “clenched fist” stance often used with vertical grips that leads to fatigue and loss of sensation during long periods in the ready position. Improves on the “thumb break” hold often used with standard vertical grips by allowing the thumb to rest comfortably alongside the top rail, pointing forward, with the rest of the hand in full contact with the forend. Heavy-duty reinforced molded polymer construction stands up to the hard knocks of tactical operations, and deep, molded-in grooves help you maintain a firm grip even with wet hands. Interchangeable inserts give the choice of a straight, uninterrupted gripping surface or one with a convenient ledge to support the index finger. Slides over any Picatinny-style rail and locks securely in place with a hardened steel crossbolt. The more compact AFG2™ is shorter and narrower to take up even less rail space, with enough clearance to fit a larger variety of weapons. Both models may be installed on tactical shotguns and other rifles with railed forends; won’t interfere with insertion and removal of magazines on AK-47s. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:68, Page:057

    HOT!
  • AR-15/M16 MOE GRIP MAGPUL More Detail

    AR-15/M16 MOE GRIP MAGPUL

    $18.95$18.95

    Improves Comfort For Better Weapon Handling & Control Magpul Original Equipment (MOE) grip is a durable, economical, easy-to-install replacement for factory pistol grip that gives the shooter a solid, secure grasp. Rigid, fully supported one-piece construction from the same reinforced, high-impact polymer as the MIAD grip, with crackle texture on the sides and deep horizontal grooves on frontstrap and backstrap. Curved beavertail similar to the MIAD B2 insert fills the grip-to-receiver junction to help you maintain a comfortable hold and protect the web of your hand during sustained firing. Compatible with Magpul MIAD Grip Cores and Enhanced Aluminum Triggerguard, available separately. AR-15, Issue:11, Page:057 Brownells Christmas , Issue:2X, Page:002 Big Book Catalog, Issue:68, Page:055 Law Enforcement / Police Store, Issue:13, Page:014 New Product Supplement, Issue:621, Page:004 Sinclair, Issue:5B, Page:251

    HOT!
  • AR-15/M16 MOE K2+ GRIPS MAGPUL More Detail

    AR-15/M16 MOE K2+ GRIPS MAGPUL

    $23.70$23.70

    The MOE-K2+ combines reinforced polymer body construction with comfortable, wrap around rubber over molding for maximum weapon control in adverse conditions. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter’s body. The MOE K2+ accepts optional storage cores for gear stowage and includes a basic cap. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:68, Page:055

    HOT!
  • AR-15 PISTOL GRIP HOGUE More Detail

    AR-15 PISTOL GRIP HOGUE

    $21.99 - $32.11$21.99 - $32.11

    Non-Slip Grip Surface; Increases ComfortStrong, fiberglass insert fits solidly against the frame, resists wear, won’t loosen. Orthopedic design with palm swells and finger grooves reduces shock, increases shooting comfort; maintains a stock appearance. AR-15, Issue:11, Page:051 AR-15, Issue:11, Page:055 Big Book Catalog, Issue:68, Page:048 Big Book Catalog, Issue:68, Page:054 Law Enforcement / Police Store, Issue:13, Page:014 New Product Supplement, Issue:503, Page:000

    HOT!
  • AR-15/M16 OVERMOLD BEAVERTAIL GRIP WITH FINGER GROOVES HOGUE More Detail

    AR-15/M16 OVERMOLD BEAVERTAIL GRIP WITH FINGER GROOVES HOGUE

    $21.99 - $23.99$21.99 - $23.99

     Ergonomically correct finger grooves  Includes trigger guard filler  Cobblestone ™ texture provides  an efficient non-slip stippling pattern  Beavertail  provides extended length of pull  Integrated rear upper extension supports the web of your hand  Virtually impervious to oils and solvents  Accommodates the Samson field survival kit (100-004-235)  Available in Black and Desert Tan AR-15, Issue:11, Page:055 Big Book Catalog, Issue:68, Page:054

    HOT!
  • AR-15/M16 RVG VERTICAL GRIPS MAGPUL More Detail

    AR-15/M16 RVG VERTICAL GRIPS MAGPUL

    $23.70$23.70

    Lightweight vertical grips position your support hand close to the barrel to help you maintain maximum weapon control at all times. Ergonomically shaped design is optimized for use with the “thumb break” method of grasping the weapon, yet works just as well with a traditional vertical grip stance. Aggressive horizontal serrations on the front and back, plus crackle texturing on the sides ensure a secure grasp in all weather conditions. RVG™ (Rail Vertical Grip) combines the MVG’s ergonomic features with a conventional Picatinny attachment system for use on standard railed handguards. Includes an adapter that enables installation on many non-railed forends, too. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:68, Page:057

    HOT!
  • AR-15/M16 AFG1 ANGLED FORE-GRIP MAGPUL More Detail

    AR-15/M16 AFG1 ANGLED FORE-GRIP MAGPUL

    $33.20$33.20

    Enhances Control & Pointability While Minimizing Fatigue In The "Ready" Position Low-profile forward grip/hand stop takes advantage of natural body mechanics to give the shooter more precise control, faster pointing, and less operator fatigue. The Magpul AFG™ (Angled Fore-Grip) positions the support hand close to the centerline of the bore for maximum recoil control to aid in fast, accurate follow-up shots. Provides a consistent reference point for finding the correct hand position quickly when mounting the weapon under stress. The natural, ergonomic hand position with the palm facing up results in better blood flow than the “clenched fist” stance often used with vertical grips that leads to fatigue and loss of sensation during long periods in the ready position. Improves on the “thumb break” hold often used with standard vertical grips by allowing the thumb to rest comfortably alongside the top rail, pointing forward, with the rest of the hand in full contact with the forend. Heavy-duty reinforced molded polymer construction stands up to the hard knocks of tactical operations, and deep, molded-in grooves help you maintain a firm grip even with wet hands. Interchangeable inserts give the choice of a straight, uninterrupted gripping surface or one with a convenient ledge to support the index finger. Slides over any Picatinny-style rail and locks securely in place with a hardened steel crossbolt. The original AFG1™ provides a large grasping surface and covers approximately 5½" of rail. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:68, Page:057

    HOT!
  • AR-15/M16 MIAD GEN 1.1 GRIP KIT MAGPUL More Detail

    AR-15/M16 MIAD GEN 1.1 GRIP KIT MAGPUL

    $34.15$34.15

    Interchangeable Inserts Let You Configure To Fit Your Hand Mission Adaptable (MIAD) modular grip system with interchangeable inserts lets you find the grip configuration that fits your hand size and mission requirements. All models come with main grip body and detachable rubber core that holds a ½ oz. lubrication bottle in the cap. Additional cores for storing batteries and other items are available separately. Front- and backstrap inserts slide on easily, yet snap firmly into place and require no glue or screws to stay put. Comes with one straight and two different beavertail backstrap inserts, plus one straight and one finger-ledge front strap insert. Reinforced molded polymer construction. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:68, Page:055 Mini-Catalogs, Issue:13, Page:008

    HOT!
  • AR-15/M16 TACTICAL DELUXE GRIP ERGO GRIPS More Detail

    AR-15/M16 TACTICAL DELUXE GRIP ERGO GRIPS

    $58.00$58.00

    Improves Trigger & Recoil Control Hand-filling, ergonomic profile with finger grooves, palm swells, and many other features improves shooting comfort and accuracy. Upward-curved, grip extension fills the web of the shooting hand, spreads recoil over a large area for excellent feel and comfort. Tactical Deluxe w/Palm Shelf features palm shelf that adjusts vertically ½" providing a custom fit for maximum recoil control. All models feature textured finish. SureGrip adds an overmolded, rubberized covering to the polymer body for a superior grip and added cushion. AR-15, Issue:11, Page:056 Big Book Catalog, Issue:68, Page:054 Law Enforcement / Police Store, Issue:08, Page:014 New Product Supplement, Issue:522, Page:000 Sinclair, Issue:5B, Page:251

    HOT!
  • M-LOK MOE VERTICAL GRIPS MAGPUL More Detail

    M-LOK MOE VERTICAL GRIPS MAGPUL

    $21.81$21.81

    The M-LOK MVG is a light weight vertical foregrip that attaches directly to M-LOK compatible hand guards and forends. The M-LOK MVG is made from the same high quality polymer as other Magpul products, and uses the new Magpul TSP texture for positive control in all environments. With rounded contours and a shorter length, the M-LOK MVG has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:68, Page:057

    HOT!
  • AR-15/M16 DELUXE SUREGRIP ERGO GRIPS More Detail

    AR-15/M16 DELUXE SUREGRIP ERGO GRIPS

    $39.00$39.00

    The Tactical Deluxe is a larger, heavier AR grip with a more pronounced palm swell than the standard Ergo grip. The finger grooves and backstrap areas of this grip are smooth SureGrip, and the side panels have a finely textured, sticky SureGrip finish. Grip is impervious to oils and solvents, provides a superior gripping surface when wet or with gloves on, and is ambidextrous. Outstanding grip for shooters with larger hands. Does not include mounting hardware. Sinclair, Issue:5B, Page:251

    HOT!
  • AR-15 BCMGUNFIGHTER™ PISTOL GRIP MOD-3 BRAVO COMPANY More Detail

    AR-15 BCMGUNFIGHTER™ PISTOL GRIP MOD-3 BRAVO COMPANY

    $17.99$17.99

    Reduced angle, ergonomically enhanced grips are designed to improve rifle control for shooters preferring the modern, “squared off” stance. Constructed of durable, impact-resistant polymer, they feature a texturized surface for a sure-hold and a water-resistant, hinged door that opens to reveal a small compartment capable of storing batteries or other small items. Two included modular triggerguard inserts (smooth and extended) may be used to close the gap between the triggerguard and grip depending on your preference; inserts also work well on rifles with larger triggerguards.  AR-15, Issue:11, Page:055 Big Book Catalog, Issue:68, Page:054

    HOT!
  • AR-15 MODULAR VERTICAL COMBAT GRIP TROY INDUSTRIES, INC. More Detail

    AR-15 MODULAR VERTICAL COMBAT GRIP TROY INDUSTRIES, INC.

    $64.99 - $69.99$64.99 - $69.99

    Easily Converts From Full-Length To Stubby ConfigurationDeeply knurled vertical forend grip provides a comfortable, secure grasp for outstanding recoil control and ultra-fast pointability. Modular design lets you choose a secure, full-palm configuration, or by unscrewing and removing the center section, a low-profile “stubby” grip. Full-length, spring-loaded locking bar, plus front and rear rail lugs ensure a rock-solid installation on any Picatinny rail. Flush-fit crossbolt to minimize risk of snagging on other gear. Rugged, all-aluminum construction with waterproof O-ring seals to keep contents of the roomy internal storage compartment dry. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:68, Page:057

    HOT!
  • AR-15/M16 ERGO 2 GRIP ERGO GRIPS More Detail

    AR-15/M16 ERGO 2 GRIP ERGO GRIPS

    $29.00$29.00

    Hand-filling, ergonomic profile with finger grooves, palm swells, and many other features improves shooting comfort and accuracy. Tactical grips feature either Suregrip or Rigid grip for a non-slip, textured finish. Suregrip adds an overmolded, rubberized covering to the polymer body for a superior grip and added cushion. Rigid grip features Rhino Hide™, a hard textured finish molded directly into the polymer. Standard Grip is slightly thinner than the factory grip but with additional depth front to back. Pebble grain, non-slip surface and subtle finger grooves improve grasp and promote correct trigger finger position. Curved rear backstrap fills web of hand. ERGO 2 features: A2 sized inner cavitiy compatible with many accessories available on the market Unique design allows installation on both .556 and .308 AR/M4 lower receivers without a need for spacer inserts Ergonomically correct finger groove Integrated rear upper extensions supports the web of your hand Superior SUREGRIP texture improves weapon control, even while wearing gloves Virtually impervious to oils and solvents AR-15, Issue:11, Page:056 Big Book Catalog, Issue:68, Page:054

    HOT!
  • AK-47/AK-74 MOE AK GRIPS MAGPUL More Detail

    AK-47/AK-74 MOE AK GRIPS MAGPUL

    $19.90$19.90

    A drop-in upgrade for AK-pattern pistol grips, the MOE AK Grip is compatible with reinforced and un-reinforced receivers. It is designed to improve ergonomics, with an aggressive texture for positive weapon control and one-piece reinforced polymer construction. It is compatible with Magpul Grip Cores for storage customization. Big Book Catalog, Issue:68, Page:164 Big Book Catalog, Issue:68, Page:194 Mini-Catalogs, Issue:13, Page:013

    HOT!
  • AR-15 BCMGUNFIGHTER™ VERTICAL GRIP MOD-3 KEYMOD BRAVO COMPANY More Detail

    AR-15 BCMGUNFIGHTER™ VERTICAL GRIP MOD-3 KEYMOD BRAVO COMPANY

    $18.99$18.99

    Low-profile length for increased mobility and decreased “snag” factor. The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle. Can be mounted in reverse angle to increase control when grabbing handguard and grip. Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations. Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces. AR-15, Issue:11, Page:057

    HOT!
  • AR-15/M16 MOE-K2 GRIP MAGPUL More Detail

    AR-15/M16 MOE-K2 GRIP MAGPUL

    $18.95 - $19.90$18.95 - $19.90

    Slimmed-down version of the original MOE grip for shooters with smaller hands or those who simply prefer a slimmer grip profile. Fits most AR-15/M16 type rifles, including AR-style .308s that use a standard AR-15 pistol grip. Narrower and shorter front to back than the original MOE or the standard A2 grip, the MOE-K is designed specifically for personal defense weapons and their operators by adding more vertical grip angle that brings the primary hand closer to the shooter’s body, thus improving control and retention. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:68, Page:055

    HOT!
  • AR-15/M16 PISTOL GRIP STARK EQUIPMENT GROUP More Detail

    AR-15/M16 PISTOL GRIP STARK EQUIPMENT GROUP

    $39.99 - $49.99$39.99 - $49.99

    Ergonomic Comfort, Less Fatigue, Maximum Control During Rapid FireDrop-in replacement for factory pistol grip is designed to give the tactical operator maximum weapon control with minimum fatigue. Every aspect of the shooter-to-weapon interface was analyzed and tested to improve on the USGI A2 grip and give the shooter the best control in any type of operational environment. One-piece construction with integral triggerguard ensures the operator’s finger doesn’t get caught between the guard and the trigger and eliminates other pinch points. Over-molding where the grip meets the receiver helps keep the hand positioned exactly where it should be during fast movement, long periods in the ready position, and during rapid or full-auto fire. Palm swell, arched backstrap, flared bottom with forward finger ledge, and molded-in stippling further ensure to a firm, stress-free grip on the weapon. Molded from durable, reinforced polymer that resists impact, temperature extremes, moisture, and most cleaning solvents and oils. Snug-fitting, synthetic rubber plug in the bottom pulls out to allow storage inside the grip. Cavities inside the plug provide rattle-free storage for two spare CR-123 batteries. Standard SE-1 model available in Black, Dark Earth, or Digital Desert Camo. SE-2 adds a sling swivel attachment point at the top rear of the grip. Available with a loop for a hook swivel or a receptacle for a quick-detach pushbutton (PB) sling swivel. Black only. AR-15, Issue:11, Page:056 Big Book Catalog, Issue:68, Page:054 New Product Supplement, Issue:621, Page:004 New Product Supplement, Issue:621, Page:020

    HOT!
  • AR-15/M16 M-LOK ANGLED FORE GRIPS MAGPUL More Detail

    AR-15/M16 M-LOK ANGLED FORE GRIPS MAGPUL

    $25.60$25.60

    The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. AR-15, Issue:11, Page:059 Big Book Catalog, Issue:68, Page:057

    HOT!
  • AR-15/M16 UNIVERSAL PISTOL GRIP COMMAND ARMS ACC More Detail

    AR-15/M16 UNIVERSAL PISTOL GRIP COMMAND ARMS ACC

    $22.00$22.00

    Interchangeable Inserts Let You Customize To Fit Your HandDrop-in replacement for factory pistol grip has interchangeable inserts that let you quickly customize your rifle with the amounts of palm swell and finger groove depth that suit you. Enhances weapon control and reduces fatigue during extended fire or long periods in the ready position. Three front-strap and three back-strap inserts let you select a front-to-back grip depth that fits your hand size. Inserts are made of textured rubber to further secure your hold under stress or with wet hands. Rear beavertail enables a high hand position for maximum recoil control while protecting the web of the hand from the receiver. Removable plug in bottom allows access to the roomy internal storage compartment. AR-15, Issue:11, Page:056 Big Book Catalog, Issue:68, Page:054 Sinclair, Issue:4B, Page:225

    HOT!
  • 308 AR MIAD GEN 1.1 GRIP KIT MAGPUL More Detail

    308 AR MIAD GEN 1.1 GRIP KIT MAGPUL

    $34.15$34.15

    The MIAD (MIssion ADaptable) Grip is a drop-in replacement for the standard 308-AR pistol grip, designed to improve weapon ergonomics. Interchangeable front and rear straps, as well as a range of storage core options allow the end user to adjust the grip for hand size as well as dynamic mission requirements. All mounting hardware is included. AR-15, Issue:11, Page:057 Big Book Catalog, Issue:68, Page:055 Mini-Catalogs, Issue:13, Page:008

    HOT!
  • AR-15/M16 VERTICAL FOREGRIP GG&G, INC. More Detail

    AR-15/M16 VERTICAL FOREGRIP GG&G, INC.

    $32.50$32.50

    Better Control & Recoil Management; Reduced Hand Fatigue In The Ready PositionLightweight vertical grip clamps securely to Picatinny forend rail to give the operator a more comfortable shooting stance and better weapon control. Helps control muzzle climb during sustained fire for quicker, more accurate follow-up shots, and minimizes hand fatigue when holding weapon in the ready position for long periods of time. Shape is narrow at the top for secure purchase by the thumb and forefinger, with a palm-filling swell at the middle, and wide, deep, concentric ribs around the lower 1/3 of the grip for a comfortable, ultra-secure grasp. Removable core has a large, waterproof storage compartment that can hold a spare bolt assembly, two AA or CR123 batteries, or other small parts. Screw-on, O-ring sealed cap removes easily and has padded interior to prevent rattling of items inside. Easy-to-use clamping system attaches simply by unscrewing the entire core, sliding the grip onto the rail, and lining it up over a slot with the aid of the alignment windows. Then screw the core back in tight for a rock-solid attachment that wont let loose. Reinforced, Acetal cold polymer construction handles the knocks and dings of tactical operations, as well as extremes of heat, cold, and humidity. AR-15, Issue:11, Page:058 Big Book Catalog, Issue:68, Page:057

    HOT!
  • AR-15 BCMGUNFIGHTER™ VERTICAL GRIPS SHORT BRAVO COMPANY More Detail

    AR-15 BCMGUNFIGHTER™ VERTICAL GRIPS SHORT BRAVO COMPANY

    $35.99$35.99

    Short Vertical Grip Enhances Control, But Won't Snag Polymer vertical grip attaches to Picatinny rail to help improve weapon handling and control. Cross-bolt design allows installation with field expedient tools, like coin or cartridge rim, and mounting clamps are reversible. Short grip won't snap on slings and gear, and forward angle gives more natural wrist position. Texture and ridges give superior grip, and storage compartment holds spare batteries or other accessories. Available in black or Flat Dark Earth. AR-15, Issue:11, Page:057

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!