• AR-15/M16 AMBIDEXTROUS SAFETY SELECTOR BATTLE ARMS DEVELOPMENT INC. More Detail

    AR-15/M16 AMBIDEXTROUS SAFETY SELECTOR BATTLE ARMS DEVELOPMENT INC.

    $51.30 - $99.00$51.30 - $99.00

    Oversized, Deeply Grooved Levers For Positive Operation With Either HandMachined, heat-treated steel safety selector puts oversized levers on both sides of the receiver for easy ambidextrous operation. Large surface area lets you operate the safety while wearing gloves, and eliminates fumbling in the dark. Pads are deeply grooved for an ultra-secure grip under stress or when hand is wet. Can be customized by positioning the larger pad on either side of the receiver, or by applying high-visibility paint. Mounting hardware included. Individual Safety Selector Levers are available for customization. Available individual levers include Standard, Short, Thin, Short & Thin, Hybrid, and Crank Levers. They Hybrid lever features a standard width top, with a thin end. The Crank lever features a large end, and thin arm up towards the top. Short Throw Safety Selector shortens the throw distance to 45o instead of 90o.  This short throw distance allows for a rapid transition from “Safe” to “Fire”.  The Short Throw Safety Selector can only be used in 45o compatible lower receivers. Available with a Matte Black finish. Original Ambidextrous Safety Selector also available in Cerakoted in Flat Dark Earth. Also available for the S&W M&P 15-22. AR-15, Issue:11, Page:036 Brownells Christmas , Issue:5X, Page:022 Big Book Catalog, Issue:68, Page:035 Mini-Catalogs, Issue:13, Page:004 New Product Supplement, Issue:641, Page:003 Sinclair, Issue:5B, Page:250

    HOT!
  • AR-15 AMBIDEXTROUS SAFETY DPMS More Detail

    AR-15 AMBIDEXTROUS SAFETY DPMS

    $29.99 - $33.99$29.99 - $33.99

    Easier Engagement For Left-Handed Shooters Puts the same, easy-to-operate safety lever on both sides of the receiver for fast, easy operation by left-handed shooters or when shooting with the weak hand. Swings through the same arc as the standard safety; will not interfere with grip position or thumb placement. LR-08B is a safety lever for semi-auto AR-15s. LR-08C is an ambi selector/safety lever for M16-type full-auto rifles only.   AR-15, Issue:11, Page:036 Big Book Catalog, Issue:68, Page:035 Law Enforcement / Police Store, Issue:09, Page:015

    HOT!
  • AR-15 SAFETY SELECTOR CMMG More Detail

    AR-15 SAFETY SELECTOR CMMG

    $29.99$29.99

    Gives Safety Ambidextrous Function Safety selector drops in to standard AR-15 and DPMS-pattern .308 lower receivers to give ambidextrous function. Opposite-side lever secures with set screw ad can be easily installed or removed. Ridges give positive purchase for fast operation. AR-15, Issue:11, Page:036

    HOT!
  • AK-47/74 ENHANCED SAFETY KREBS CUSTOM, INC. More Detail

    AK-47/74 ENHANCED SAFETY KREBS CUSTOM, INC.

    $58.99$58.99

    FEATURES: Extended lower pad Bolt hold open notch Precision stamped from 1mm 1050 steel Heat treated to 50c One piece exterior construction Made in USA Matte black painted finish Fits standard AK-47 and AK-74 riflesBENEFITS: Extended safety allows for easier manipulation using the firing hand Bolt hold open notch allows for the AK bolt to be locked to the rear by holding the charging handle Heat treated one piece outer construction will hold up to repeated use Matte black painted finish matches traditional AK finishes Big Book Catalog, Issue:68, Page:164 Mini-Catalogs, Issue:13, Page:013

    HOT!
  • AR-15 SHORT THROW SELECTOR NOVESKE RIFLEWORKS LLC More Detail

    AR-15 SHORT THROW SELECTOR NOVESKE RIFLEWORKS LLC

    $37.95 - $39.95$37.95 - $39.95

    60/ Selector With Magpul SSG Levers Noveske’s STS (Short Throw Selector) gives your AR’s selector a short 60° throw for fast, easy transition between the “Fire” and “Safe” positions. It uses Magpul’s popular SSG selector lever (included) for the FN SCAR for enhanced ergonomic feel, and is available in both standard right-hand and ambidextrous versions. For further versatility, the Noveske kit includes both long and short levers to help you get the best feel and function. The central shaft is machined from hardened stainless steel with a nitride coating for surface wear resistance. AR-15, Issue:11, Page:037 Big Book Catalog, Issue:68, Page:035

    HOT!
  • BUEHLER-STYLE LOW SAFETY TIMNEY More Detail

    BUEHLER-STYLE LOW SAFETY TIMNEY

    $38.99 - $49.99$38.99 - $49.99

    Positive Stops At On & Off; Simple, Fast InstallationThe re-make of the famous Buehler Low Safety. Faster and much more convenient to operate than the factory safety plus, it will not interfere with even the lowest mounted scopes. Rotates through a 70 arc on the right side of the rifle with positive stops in both the "on" and "off" positions. Securely holds the bolt and the striker in the locked position. Precision CNC machined from high-quality steel, hardened at all wear points, polished and blued. No machining required for installation on M98. M93/96 may require grinding of cocking piece. Big Book Catalog, Issue:68, Page:169

    HOT!
  • AR-15 ADJUSTABLE/REVERSIBLE/AMBIDEXTROUS SAFETY SELECTOR J P ENTERPRISES More Detail

    AR-15 ADJUSTABLE/REVERSIBLE/AMBIDEXTROUS SAFETY SELECTOR J P ENTERPRISES

    $66.99$66.99

    Eliminates "Fitting" The Safety; Works With Factory & Aftermarket Triggers Easy-to-install, reversible safety selector ensures ultra-reliable engagement and eliminates the time-consuming job of “fitting the safety” to a factory or aftermarket trigger—the perfect upgrade to accompany a J.P. Enterprises Adjustable Trigger. Eliminates the risk of damaging the trigger during fitting and shortens installation time by as much as one-third. An adjustment screw on the selector drum lets you quickly and easily set the correct trigger/safety relationship to completely block trigger movement when the selector is set to “safe.” A second screw inside the drum ensures the adjustment screw stays locked in place. Deeply grooved control pad gives positive thumb engagement even when wearing gloves, and can be installed in the standard position on the left-side of the receiver or on the right side for fast, natural operation by left-handed shooters. Includes a low-profile ambidextrous lever for the other side that adds minimal bulk while giving you the flexibility to operate the safety with the off hand in an emergency or if the strong hand is injured. Or add the JPFC-SL1 Ambidextrous Selector Lever to give your rifle a full-size safety lever on both sides of the receiver for fully ambidextrous operation. Ideal for tactical and competition shooters who may need to operate the selector with the weak hand to accommodate an unconventional shooting position. AR-15, Issue:11, Page:036 Big Book Catalog, Issue:68, Page:035 Law Enforcement / Police Store, Issue:08, Page:001 Law Enforcement / Police Store, Issue:08, Page:007 Mini-Catalogs, Issue:13, Page:008

    HOT!
  • AR-15 SAFETY SELECTOR DPMS More Detail

    AR-15 SAFETY SELECTOR DPMS

    $9.99$9.99

    FITS: AR-15 - Common Parts, .223 AR-15, Issue:06, Page:095 Big Book Catalog, Issue:68, Page:605

    HOT!
  • AR-15 AMBIDEXTROUS SEMI-AUTO SAFETY TROY INDUSTRIES, INC. More Detail

    AR-15 AMBIDEXTROUS SEMI-AUTO SAFETY TROY INDUSTRIES, INC.

    $55.99$55.99

    Lets You Control Safety From Either Side Of Your AR All-steel selector lever installs like the original and adds a lever to the right side of the gun for left-handed shooters or right-handed shooters shooting from unorthodox positions. Right-side lever has a low profile to avoid interfering with the trigger finger of right-handed shooters and is retained with a detent - no screws or pins to work loose. Small and large lever can be reversed and used on either side. Made of tool steel to last a lifetime. AR-15, Issue:11, Page:037 Big Book Catalog, Issue:68, Page:035

    HOT!
  • AR-15 STAR SAFETY SELECTOR ROCK RIVER ARMS More Detail

    AR-15 STAR SAFETY SELECTOR ROCK RIVER ARMS

    $9.99$9.99

    Round Profile Rolls Under Your ThumbRound thumb pad gives fast, positive operation; especially important when wearing gloves. Rolls easily under your thumb for faster application or release. AR-15, Issue:11, Page:036 Big Book Catalog, Issue:68, Page:035 Law Enforcement / Police Store, Issue:09, Page:016 New Product Supplement, Issue:541, Page:000

    HOT!
  • MARK II SAFETY DAYTON TRAISTER More Detail

    MARK II SAFETY DAYTON TRAISTER

    $22.99$22.99

    Clears Lowest Scope MountingGraceful design sets low, allowing lowest possible scope mounting. One-piece construction, beautiful, non- glare, blued finish. Right-hand operation only. Easily installed, requiring slotting of bolt sleeve. Big Book Catalog, Issue:68, Page:169

    HOT!
  • AR-15 AMBIDEXTROUS SAFETY SELECTOR SS BATTLE ARMS DEVELOPMENT INC. More Detail

    AR-15 AMBIDEXTROUS SAFETY SELECTOR SS BATTLE ARMS DEVELOPMENT INC.

    $79.00$79.00

    Oversized, Deeply Grooved Levers For Positive Operation With Either Hand Machined, heat-treated stainless steel safety selector puts oversized levers on both sides of the receiver for easy ambidextrous operation. Large surface area lets you operate the safety while wearing gloves, and eliminates fumbling in the dark. Pads are deeply grooved for an ultra-secure grip under stress or when hand is wet. Can be customized by positioning the larger pad on either side of the receiver, or by applying high-visibility paint. Mounting hardware included. Individual Safety Selector Levers are available for customization.

    HOT!
  • REMINGTON 700 THREE-POSITION SAFETY SHROUD GENTRY CUSTOM LLC More Detail

    REMINGTON 700 THREE-POSITION SAFETY SHROUD GENTRY CUSTOM LLC

    $154.99$154.99

    Side Swing-Style To Upgrade Factory Guns Or Build Custom Rifles All-machined steel shroud and lever upgrades the Remington 700 action to a three-position safety. Lets you use match grade triggers that lack a safety. Provides bolt locked, bolt open and fire positions with positive detents. No tools needed to field strip for cleaning, service. Available polished blued. Requires gunsmith installation. Big Book Catalog, Issue:68, Page:167 New Product Supplement, Issue:525, Page:000

    HOT!
  • Detent, Selector DPMS More Detail

    Detent, Selector DPMS

    $1.55$1.55

    FITS: AR-15 - Common Parts, .223 AR-15, Issue:06, Page:095 Big Book Catalog, Issue:68, Page:604

    HOT!
  • AR6721 FIRE CONTROL SELECTOR, SEMI COLT More Detail

    AR6721 FIRE CONTROL SELECTOR, SEMI COLT

    $18.99$18.99

    FITS: AR-15 - Common Parts AR-15, Issue:06, Page:092 Big Book Catalog, Issue:68, Page:601 New Product Supplement, Issue:494, Page:000

    HOT!
  • SAFETY SELECTOR LEVERS BATTLE ARMS DEVELOPMENT INC. More Detail

    SAFETY SELECTOR LEVERS BATTLE ARMS DEVELOPMENT INC.

    $17.05 - $22.75$17.05 - $22.75

    Oversized, Deeply Grooved Levers For Positive Operation With Either Hand Replacement levers are deeply grooved for sure-grip and available in various lengths, widths, and styles to facilitate easy safety operation in any condition. AR-15, Issue:11, Page:036 Big Book Catalog, Issue:68, Page:035

    HOT!
  • TAVOR LUMA SAFETY MANTICORE ARMS, INC More Detail

    TAVOR LUMA SAFETY MANTICORE ARMS, INC

    $34.99$34.99

    The Tavor LUMA (Lever, Upgraded Metal Ambidextrous) is a drop-in replacement for your factory safety.  The LUMA will work on both the right and left side of the gun.  Made of 6061 aluminum and finished in black anodizing.  The LUMA comes in a medium profile, mimicking the size of the IWI safety, and a slim, providing a much smaller profile. Big Book Catalog, Issue:68, Page:169

    HOT!
  • REMINGTON 700 REM-SAF SAFETY RIFLE BASIX More Detail

    REMINGTON 700 REM-SAF SAFETY RIFLE BASIX

    $37.99$37.99

    Fully Interchangeable With The Factory Safety Up until these replacement parts became available the only way to repair a damaged or misplaced Remington 700 safety was to send it back to the factory, factory repair center, or make your own; parts were simply not available. With these high-grade aftermarket parts you can easily replace damaged or lost safety parts and know the repair is solid. Big Book Catalog, Issue:68, Page:169 Big Book Catalog, Issue:68, Page:172 Law Enforcement / Police Store, Issue:07, Page:022 Sinclair, Issue:5B, Page:256

    HOT!
  • M14/M1A SIMULATED FULL-AUTO SELECTOR LEVER FULTON ARMORY More Detail

    M14/M1A SIMULATED FULL-AUTO SELECTOR LEVER FULTON ARMORY

    $49.99$49.99

    Fills the Gap In The Stock & Gives A Semi-Auto Rifle A "Full-Auto" LookOne-piece simulated selector lever made of Parkerized steel fits in the selector lever cutout in USGI and aftermarket M14 stocks to give your rifle the authentic appearance of a full-auto capable GI M14. Fills the unsightly gap and helps keep dirt and debris out of the action. Rotates to semi- or full-auto position. Installs on the stock, not the receiver perfectly legal. Big Book Catalog, Issue:68, Page:167 New Product Supplement, Issue:631, Page:009

    HOT!
  • AR-15 UNIVERSAL SAFETY BADGER ORDNANCE More Detail

    AR-15 UNIVERSAL SAFETY BADGER ORDNANCE

    $54.99$54.99

    The Universal Safety Selector can be installed in either a right or left hand configuration, preventing selector obstructor for the left handed shooter. Machined from billet 4140 hardened steel and Mil Spec parkerized finish.

    HOT!
  • SAFETY DETENT HIGH STANDARD More Detail

    SAFETY DETENT HIGH STANDARD

    $3.99$3.99

    FITS: AR-15 - Common Parts, .223 AR-15, Issue:06, Page:096 Big Book Catalog, Issue:67, Page:613

    HOT!
  • SCAR SELECTOR SET MAGPUL More Detail

    SCAR SELECTOR SET MAGPUL

    $18.95$18.95

    Drop-in, dual sided selectors for fn SCAR family Compatible w/ military MK16 & MK17 Compatible with semi-auto scar 16s & 17s Direct replacement of OEM selectors Requires no permanent modification to weapon Simple install using existing screw Big Book Catalog, Issue:68, Page:169

    HOT!
  • SAFETY SELECTOR HIGH STANDARD More Detail

    SAFETY SELECTOR HIGH STANDARD

    $13.41$13.41

    FITS: AR-15 - Common Parts, .223 AR-15, Issue:06, Page:096 Big Book Catalog, Issue:67, Page:613

    HOT!
  • AR-15 AMBIDEXTROUS SAFETY KIT KNIGHTS ARMAMENT More Detail

    AR-15 AMBIDEXTROUS SAFETY KIT KNIGHTS ARMAMENT

    $62.44$62.44

    Choose The Right-Hand Lever Configuration That Suits Your Shooting Requirements Knight's semi-auto safety lever gives true ambidextrous selector operation to your AR. Comes with three different right-hand levers, so you can choose the exact size/position to suit your personal shooting preferences. Choose a full-size right-side lever that mirrors the left-side lever, a low-profile, semi-scalloped lever that is minimally obtrusive, or an indicator arrow that gives instant visual verification of the rifle's firing mode.  Easy to install, too: with the selector fully installed in the gun, you simply remove a recessed setscrew to swap the right-hand lever. All-steel construction to handle hard use, with smooth, positive operation.

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!