• AR-15/M16 GEN3-M FOLDING STOCK ADAPTER LAW TACTICAL LLC More Detail

    AR-15/M16 GEN3-M FOLDING STOCK ADAPTER LAW TACTICAL LLC

    $269.99$269.99

    Put A Folding Stock On Any AR-Pattern Rifle! Law Tactical's steel adapter enables installation of a folding stock on any AR-15 to create a smaller-profile rifle for easy deployment from a vehicle or transport in non-permissive environments. Works with standard gas impingement OR gas piston system. Accepts A2, mil-spec M4-style, and commercial carbine receiver extension tube and almost any stock that fits them. Compatible with all standard bolt carrier groups, including full-auto and .308 size. Single-button operation for quick folding and unfolding and steel locking latch keeps stock securely in place when extended. Gen3-M has a lowered hinge to avoid interference when charging the weapon, and a setscrew keeps the adapter securely affixed to the receiver. Hinge tension is adjustable so you can choose how stiff the folding mechanism is. Includes special bolt carrier extension (no tools to install/remove). Current version utilizes standard buffer retaining pin and spring. Stock adapter features DLC coating.View additional product information AR-15, Issue:11, Page:048

    HOT!
  • AR-15/M16 CARBINE MIL-SPEC BUTTSTOCK KIT BROWNELLS More Detail

    AR-15/M16 CARBINE MIL-SPEC BUTTSTOCK KIT BROWNELLS

    $59.99$59.99

    Collapsible buttstock similar to the current US GI M4 carbine stock provides convenient six-position length-of-pull adjustment to fit different-size shooters, including those wearing body armor. Ready to install on any standard AR-15 rifle or carbine lower receiver; includes buffer tube, receiver lock plate, lock nut, toe-mounted steel sling loop, carbine recoil spring and buffer. Buttstock is made from extremely tough, fiberglass-reinforced, injection-molded nylon to resist impact, heat, moisture, extreme cold, and most cleaning solvents. Steel lock nut has four square notches and pre-cut detents for staking to lock plate. Available with Mil-Spec (nominal 1.14" O.D.) receiver extension tube. Stock interior diameter is matched to buffer tube O.D. for a snug fit that eliminates un wanted play and rattles. AR-15, Issue:11, Page:042 Brownells Christmas , Issue:2X, Page:020 Big Book Catalog, Issue:68, Page:041 Mini-Catalogs, Issue:13, Page:004

    HOT!
  • AR-15/M16 GL-MAG SURVIVAL COMMERCIAL BUTTSTOCK FAB DEFENSE More Detail

    AR-15/M16 GL-MAG SURVIVAL COMMERCIAL BUTTSTOCK FAB DEFENSE

    $108.65$108.65

    Keep An Extra Magazine Always On Your Rifle Reinforced polymer stock fits onto M4 Carbine style buffer tube and lets you keep a loaded magazine on the rifle at all times. Includes polymer 10-round magazine, and accepts all other standard-sized AR magazines. Quick-release gives instant access to extra magazine and under-stock position keeps magazine from getting caught on gear or webbing. Unique inverted positioning lever makes it easy to adjust length, but blends into the contours of the stock. Fits both Mil-Spec and Commercial diameter tubes, and features integrated ambidextrous QD sling connectors and thick rubber buttpad with positive no-slip texture. Buffer tube not included. AR-15, Issue:11, Page:046 Big Book Catalog, Issue:68, Page:044 Mini-Catalogs, Issue:13, Page:016

    HOT!
  • AR-15/M16 CTR MIL-SPEC BUTTSTOCKS MAGPUL More Detail

    AR-15/M16 CTR MIL-SPEC BUTTSTOCKS MAGPUL

    $56.95$56.95

    Locking System Eliminates "Play" Features a friction locking mechanism that eliminates movement between the buffer tube and buttstock for a solid “feel” when mounting rifle to shoulder. Heavy duty, spring-loaded hand lever allows fast length-of-pull adjustments. Nylon polymer body provides maximum impact and heat resistance, with molded-in reinforcements at stress points. Accepts a variety of ambidextrous sling attachment options, including web slings and single-point, push-button sling mounts. Comb contour is wider than standard issue M4 stock to help shooter maintain a solid cheekweld. Synthetic rubber buttpad increases comfort and helps prevent slippage. Fits buffer tubes that accept both four- and six-position collapsible stocks. Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. Available in Black, Dark Earth, and O.D. Green, so you can match the color of your stock to your tactical rifle's color scheme. Mil-Spec fits smaller 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec carbines. AR-15, Issue:11, Page:045 Brownells Christmas , Issue:5X, Page:004 Big Book Catalog, Issue:68, Page:043 Law Enforcement / Police Store, Issue:13, Page:011 New Product Supplement, Issue:602, Page:006

    HOT!
  • REMINGTON 700 HUNTER 700 STOCKS MAGPUL More Detail

    REMINGTON 700 HUNTER 700 STOCKS MAGPUL

    $246.95$246.95

    Made from reinforced polymer and a machine finished, anodized A380 cast aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users a fully adjustable length of pull, comb height, and enhanced ergonomics. Compatible with all Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user. This stock is also M-LOK compatible to accept a broad range of accessories. Also available seperately is the Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting.

    HOT!
  • AR-15/M16 MOE MIL-SPEC BUTTSTOCKS MAGPUL More Detail

    AR-15/M16 MOE MIL-SPEC BUTTSTOCKS MAGPUL

    $37.95$37.95

    Economical, Drop-In Upgrade For Carbine Collapsible Stock Magpul Original Equipment (MOE) carbine buttstock provides the quality, durability, and ergonomic benefits of Magpul’s CTR stock in a rugged, economical, drop-in package. Strong, A-frame design is lightweight and comfortable, yet provides operator with plenty of support. Comb contour is wider than standard issue M4 stock to help shooter maintain a solid, consistent cheekweld. Streamlined exterior and protected release lever won’t snag on clothing, gear, vehicle interior, or vegetation. Heavy duty, spring-loaded release lever allows fast length-of-pull adjustments and won’t dig into your hand. Impact- and heat-resistant, polymer construction includes molded-in reinforcements at stress points, plus two slots for web slings and a hole for a toe-mounted sling swivel or clip-on sling. Soft, synthetic rubber buttpad increases comfort and helps prevent slippage. Mil-Spec fits 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec tubes that accept both four- and six-position collapsible stocks. AR-15, Issue:11, Page:044 Big Book Catalog, Issue:68, Page:042 Law Enforcement / Police Store, Issue:13, Page:011 New Product Supplement, Issue:611, Page:005

    HOT!
  • AR-15/M16 5.56 PRS PRECISION RIFLE SNIPER ADJUSTABLE STOCK MAGPUL More Detail

    AR-15/M16 5.56 PRS PRECISION RIFLE SNIPER ADJUSTABLE STOCK MAGPUL

    $242.25$242.25

    Adjustable Length Of Pull & Comb Height Fully adjustable stock and comb for AR-15/M16 rifles readily adapts length of pull and comb height with two click-detent adjustment wheels. Drop-in installation on rifles with standard A1/A2 fixed buffer tubes without A2 spacer. Rubber buttpad seats securely onto your shoulder and won’t slip during sustained shooting exercises. Fully-raised comb will not get in the way of charging handle operation. Removable base cover conceals an accessory rail to provide a mounting platform for a monopod. Removable sling loops can be mounted on either side of stock to accommodate your preferred carry position. Get the PRS Stock QD Sling Adapter to use with your PRS stock. AR-15, Issue:11, Page:046 Brownells Christmas , Issue:5X, Page:017 Big Book Catalog, Issue:68, Page:044 Law Enforcement / Police Store, Issue:13, Page:011 Mini-Catalogs, Issue:15, Page:004 New Product Supplement, Issue:602, Page:006 Sinclair, Issue:5B, Page:250

    HOT!
  • 308 AR 308/7.62 PRS PRECISION RIFLE SNIPER ADJUSTABLE STOCK MAGPUL More Detail

    308 AR 308/7.62 PRS PRECISION RIFLE SNIPER ADJUSTABLE STOCK MAGPUL

    $242.25$242.25

    Fully adjustable stock and comb for AR-Style .308 rifles readily adapts length of pull and comb height with two click-detent adjustment wheels. Drop-in installation on rifles with standard A1/A2 fixed buffer tubes without A2 spacer. Rubber buttpad seats securely onto your shoulder and won’t slip during sustained shooting exercises. Fully-raised comb will not get in the way of charging handle operation. Removable base cover conceals an accessory rail to provide a mounting platform for a monopod. Removable sling loops can be mounted on either side of stock to accommodate your preferred carry position. Get the PRS Stock QD Sling Adapter to use with your PRS stock. AR-15, Issue:11, Page:046 Brownells Christmas , Issue:4X, Page:021 Big Book Catalog, Issue:68, Page:044 Law Enforcement / Police Store, Issue:13, Page:011 Mini-Catalogs, Issue:15, Page:004 Sinclair, Issue:5B, Page:250

    HOT!
  • AR-15/M16 MODULAR BUTTSTOCK LUTH-AR LLC More Detail

    AR-15/M16 MODULAR BUTTSTOCK LUTH-AR LLC

    $139.99 - $149.99$139.99 - $149.99

    Stocks Add Adjustment & Extra Features To Rifles Glass-filled nylon rifle stocks fit onto standard A1/A2 buffer tubes and add adjustments and extra features to AR-15 rifles, including most .308 models. Stocks feature textured rubber recoil pads and 2 QD sling sockets for fast sling mounting and dismounting. Modular Stock gives an adjustable cheek rest, and adjustable length of pull. Weighs less compared to other adjustable stocks. Skeleton Stock has futuristic appearance, and helps reduce weight. Will not fit on carbine buffer tubes. Includes Allen wrench for mounting. Uncle Mike's QD Sockets (593-000-038) can be epoxied into socket on the side of each stock. AR-15, Issue:11, Page:043 Mini-Catalogs, Issue:15, Page:004

    HOT!
  • AK-47/AK-74 ZHUKOV-S STOCKS MAGPUL More Detail

    AK-47/AK-74 ZHUKOV-S STOCKS MAGPUL

    $94.95$94.95

    The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers (sold separately), and a shock-absorbing rubber butt-pad for superior traction. The Zhukov has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded polymer Zhukov-S Stock redefines the human interface with the AK platform. Big Book Catalog, Issue:68, Page:199

    HOT!
  • REMINGTON 700 X-RAY CHASSIS KINETIC RESEARCH GROUP More Detail

    REMINGTON 700 X-RAY CHASSIS KINETIC RESEARCH GROUP

    $599.99 - $629.99$599.99 - $629.99

    The X-Ray Chassis for the Remington 700SA is a modular rifle stock used for precision shooting and provides unprecedented value to the shooter. It is a “drop-in” fit for the Remington 700SA with no gunsmithing and no bedding required. The X-Ray is a hybrid design made from aluminum and reinforced polymer. This hybridization yields a chassis that is nearly the lightest available and is half the weight of some others. It features adjustable ergonomics and an aluminum “V” bedding system for premium accuracy. The checkpiece height (quick adjust), checkpiece position, Buttpad height, and length of pull (with spacers) are all customizable. The end result is a chassis with a tailored ergonomic fit the is second to none. In addition, the chassis accepts AICS magazines with no floorplate purchase needed and accommodates all but the heaviest straight cylinder barrels. Most aftermarket recoil lug and triggers will also fit. The chassis inlcudes three, 3/8" spacers to add up to 1 1/8" to the length of pull. Brownells also offers KRG's LOP Spacer Set with three additional 3/8" spacers. Between the supplied spacers and the opptional LOP Spacer Set the X-Ray chassis' length of pull is adjustable in 3/8" increments from 12.8" to 15". Big Book Catalog, Issue:68, Page:166 Mini-Catalogs, Issue:15, Page:004 Sinclair, Issue:5B, Page:238

    HOT!
  • AR-15/M16 MIL-SPEC MOE FURNITURE SETS MAGPUL More Detail

    AR-15/M16 MIL-SPEC MOE FURNITURE SETS MAGPUL

    $79.99$79.99

    These furniture sets allow you to easily upgrade your rifle with the popular Magpul MOE line. Included are the MOE Mil-Spec stock, MOE carbine forend, and MOE grip. Furniture sets are available in black, Flat Dark Earth, olive drab green, and gray.

    HOT!
  • AR-15/M16 ACE ARFX SKELETON STOCK DOUBLE STAR More Detail

    AR-15/M16 ACE ARFX SKELETON STOCK DOUBLE STAR

    $89.99$89.99

    Light & Strong For Fast Handling In Extreme Environments Multiple sling points are but one of the many features that make this lightweight, aluminum stock ideal for competition and tactical use. Supplied with an Uncle Mike’s 1.25" sling swivel and stud. A lightweight, fast handling stock for sporting, tactical and competition use. Gives three sling attachment points. Uses your existing A-2 fixed stock buffer tube as the top tube to keep weight to a minimum. Closed-cell, foam over-tube provides a soft, comfortable cheek weld, plus insulates your face from vibration and inclement weather. Over-tube is formulated to withstand cleaning solvents and gun oils, UV radiation, freezing temperatures, salt water and rough handling. Machined aluminum buttplate is drilled and tapped for rubber Butt Pad (included). Installation requires A-2 buffer tube, rifle buffer, and rifle buffer spring. AR-15, Issue:11, Page:043 Brownells Christmas , Issue:2X, Page:001 Big Book Catalog, Issue:68, Page:041 Law Enforcement / Police Store, Issue:05, Page:011 New Product Supplement, Issue:555, Page:004

    HOT!
  • 308 AR SILENT CAPTURED SPRING SYSTEM J P ENTERPRISES More Detail

    308 AR SILENT CAPTURED SPRING SYSTEM J P ENTERPRISES

    $23.99 - $132.99$23.99 - $132.99

    Drop-in captured-spring recoil system helps your AR function more smoothly and quieter without any permanent modifications. The carefully balanced, custom-ground buffer spring, combined with the JP LMOS buffer, greatly reduces friction and vibration - say goodbye to the annoying “spoon over a cheese grater” noise of conventional springs and buffers. Fits buffer tubes for both M4-style collapsible stocks and also, using the included spacer, the longer tubes for fixed rifle stocks. The Alternative Spring Pack Kits are a pack of 3 different spring weights for the JP Silent Captured Spring that allow custom tuning of the device to a given rifle. While the default spring offers the best performance for the widest range of configurations, a simple disassembly and reassembly of the JPSCS-10 with a slightly different spring rate can yield truly optimized performance, particularly for rifles without an adjustable gas block. The Spring Packs are available separately or with a Standard or Heavy Capture Spring.   AR-15, Issue:11, Page:031 Brownells Christmas , Issue:5X, Page:022 Big Book Catalog, Issue:68, Page:030 Mini-Catalogs, Issue:13, Page:006 Sinclair, Issue:5B, Page:250

    HOT!
  • AR-15/M16 ACS MIL-SPEC BUTTSTOCKS MAGPUL More Detail

    AR-15/M16 ACS MIL-SPEC BUTTSTOCKS MAGPUL

    $85.45$85.45

    Drop-In Replacement For M4 Stock With Storage & Enhanced Comfort Features Adaptable Carbine/Storage (ACS) stock is a drop-in replacement for standard USGI M4 collapsible stock that gives the tactical operator extra storage options, a secure, comfortable cheekweld, and an advanced dual-locking lever. Smooth, streamlined exterior contours prevent snagging on clothing, sling, or vegetation, and help ensure fast exits from vehicles without snagging on gear. Removable battery storage compartments run the full length of the extra-wide comb and hold 2 AA or 3 CR-123 batteries, while providing a wide, contoured area for an exceptionally solid, comfortable cheekweld. Secure molded rubber caps keep water and dust out of compartments and face the rear of the stock for easy removal; cap exterior is beveled to resist snagging when shouldering weapon. Positive-locking trapdoor on right side of the stock reveals a roomy storage compartment for additional batteries, coiled up cleaning cable and other cleaning supplies, ear plugs, spare parts, or other small items. Magpul’s dual locking system uses an additional cam lever to protect the release lever from accidental operation, yet still allows you to adjust length of pull by simply pushing on the release lever. Slot molded in the toe provides an attachment point for a 1¼" wide sling. Also includes the same detachable rubber buttpad found on Magpul CTR and UBR buttstocks to help keep stock firmly mounted on shoulder. Mil-Spec fits 1.14" O.D. buffer tubes on Colt-manufactured M4 and similar mil-spec tubes that accept both four- and six-position collapsible stocks. AR-15, Issue:11, Page:045 Brownells Christmas , Issue:2X, Page:007 Big Book Catalog, Issue:68, Page:045 Law Enforcement / Police Store, Issue:13, Page:011 New Product Supplement, Issue:621, Page:002

    HOT!
  • RUGER® 10/22® HUNTER X-22 STOCKS MAGPUL More Detail

    RUGER® 10/22® HUNTER X-22 STOCKS MAGPUL

    $132.99$132.99

    Reinforced polymer construction for strength and durability. Optimized grip angle and forend shape provides improved ergonomics. Adjustable LOP with included spacers and optional cheek risers for comb height adjustment. Drop-in design requires no gunsmithing. Reversible barrel tray accepts all factory lightweight and match bull barrels. Multiple sling mounting options and M-LOK compatible for additional accessories. Non-slip rubber butt-pad.

    HOT!
  • AR-15/M16 BATTLELINK MINIMALIST MIL-SPEC STOCKS MISSION FIRST TACTICAL, LLC More Detail

    AR-15/M16 BATTLELINK MINIMALIST MIL-SPEC STOCKS MISSION FIRST TACTICAL, LLC

    $49.99$49.99

    Battlelink Stocks are the evolution of battlefield technology manufactured using a specially developed Military Grade reinforced, super tough polyamide.  The Battlelink Minimalist has been designed to be one of the lightest on the market, coming in at right around 6oz. Holding true to the basics, while adding functionality with the minimal amount of material possible was our goal. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and is able to accept an optimized sling configuration. This ultimately makes our stock the lightest in today's AR accessories market.

    HOT!
  • AR-15/M16 STR MIL-SPEC BUTTSTOCKS MAGPUL More Detail

    AR-15/M16 STR MIL-SPEC BUTTSTOCKS MAGPUL

    $75.95$75.95

    Adjustable Carbine Stock With Internal Battery Storage An enhanced version of the Magpul CTR® stock, the STR (“Storage/Type Restricted”) buttstock features two 4¼" left- and right-side positioned battery storage tubes and a wider cheekweld for extra comfort. Rubber caps at the rear keep the storage compartments resistant to water incursion, yet pop off easily for access to two AA or two CR-123 batteries inside. Features two integral 1¼" sling loops. Includes reversible QD swivel socket. Friction locking mechanism minimizes wobble between the buffer tube and the buttstock for a solid, secure "feel", which is enhanced by the detachable .30" thick rubber rubber that adds plenty of "grab" to prevent shoulder slippage. AR-15, Issue:11, Page:046 Big Book Catalog, Issue:68, Page:044

    HOT!
  • REMINGTON 700 308 AICS AX CHASSIS ACCURACY INTERNATIONAL More Detail

    REMINGTON 700 308 AICS AX CHASSIS ACCURACY INTERNATIONAL

    $1,559.99$1,559.99

    The AX AICS (Accuracy International Chassis System) brings the ergonomic and functional benefits of the advanced Accuracy International AX sniper rifle system to the Remington 700 platform. A far superior chassis system suitable for any environment and mission, the AX AICS provides a degree of modularity and configurability that cannot be achieved with a traditional stock. Quick and easy to install, requiring no specialized gunsmithing, the AX AICS is built from polymer and alloy. The AX chassis is more than just a stock! Full length aluminum chassis. The stiffness chassis gives the rifle a rugged, environmentally stable platform to enhance accuracy and zero retention. The action is attached to the chassis by two bolts (supplied) and retained in a self-aligning vee block bedding system which eliminates the need for bedding. Folding chassis. When folded, the overall length is reduced by 8”. Ideal for rapid deployment from a vehicle, the stock locks in the folded position to avoid noise. Release by simply pulling the butt, the wear compensated hinge ensures total rigidity in the extended position. Pistol grip. Adjustable cheekpiece. The standard adjustable cheekpiece adjusts left/right as well as for height to obtain optimum cheek position when using night vision equipment or telescopic sights with large objective lenses. Butt pad. Chassis systems are fitted with a bolt-on soft rubber pad with 10 & 20mm spacers as standard. Bipod adapter. The chassis has a fixing point for Harris Bipods fitted as standard. Magazine. Surface toughened and finished with a multi-part, anti-corrosion, low friction coating. One 5 round magazine is supplied as standard. The chassis design makes loading faster and more positive – no need to lift the rifle. Forend mount assembly. 16” long action or 13” short action free float tube forend featuring a keyhole slot system for quick and securely attaching modular rail sections for mounting accessories. One 80mm rail and one sling loop included as standard. Big Book Catalog, Issue:68, Page:166

    HOT!
  • AR-15 MOE-SL STOCKS MAGPUL More Detail

    AR-15 MOE-SL STOCKS MAGPUL

    $56.95$56.95

    Optimized For Use With Body Armor & Modular Gear Direct replacement buttstock for AR-15/M16 carbines is designed to withstand the rigors of the modern battlefield. Slim stock features a sloping cheek weld for a firm fit and improved user comfort. The dual side latch release provides easy adjustments and is set up out of the way to remain snag free. Premium chrome-silicon locking spring ensures a positive long on the receiver extension tube and long service life for the stock. Internal anti-rattle feature provides a snug fit to minimize wobble on the receiver extension tube. Rolled toe and angular butt plate allows for easier shoulder transitions and better fit when using body armor. Non-slip rubber butt-pad helps keep the carbine on your shoulder and increases recoil absorption. Two sling mounts allow you to utilize different mounting options. AR-15, Issue:11, Page:044 Big Book Catalog, Issue:68, Page:043

    HOT!
  • AR-15/M16 SOPMOD MIL-SPEC BUTTSTOCK B5 SYSTEMS More Detail

    AR-15/M16 SOPMOD MIL-SPEC BUTTSTOCK B5 SYSTEMS

    $95.00 - $110.00$95.00 - $110.00

    Improves Cheekweld & Provides Waterproof Storage For Small Items Currently employed by the U.S. military, this reinforced polymer stock fits M4-type receiver extensions and offers an improved cheekweld designed for increased comfort and consistency. Two waterproof storage compartments running the length of the stock hold 2 AA or 3 CR-123 batteries. Streamlined contours resist snagging on clothing, equipment, or vegetation to aid in safe and stealthy operation. Sure-Grip stock latch ensures convenient and intuitive length-of-pull adjustment, while the anti-slip rubber recoil pad secures the weapon to the operator’s shoulder. Features a black, stainless steel QD swivel mount and two molded 1¼" wide sling slots.   AR-15, Issue:11, Page:047 Big Book Catalog, Issue:68, Page:045

    HOT!
  • AK-47/74 ZHUKOV FURNITURE SETS MAGPUL More Detail

    AK-47/74 ZHUKOV FURNITURE SETS MAGPUL

    $199.99$199.99

    Update your Kalashnikov with these Magpul kits that feature the AK-47/74 Zhukov stock and handguard along with the Magpul MOE AK+ grip. The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers (sold separately), and a shock-absorbing rubber butt-pad for superior traction. The Zhukov has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded polymer Zhukov-S Stock redefines the human interface with the AK platform. The Magpul Zhukov Hand Guard is a fully-featured AK forearm for the modern AK. The Zhukov Hand Guard casts aside traditional AK forearm shortcomings and offers an extended option for modern shooting techniques, an aluminum chassis for strength and heat dispersion, a comfortable injection molded exterior for superior ergonomics, and M-LOK slots for optimized accessory attachment. Compatible with the Ultimak gas tube rail for optics mounting, the Zhukov Hand Guard redefines functionality for the modern AK platform. Installation requires removal of the hand guard retainer. A drop-in upgrade for AK-pattern pistol grips, the MOE AK+ is compatible with reinforced and unreinforced receivers. Designed to improve ergonomics and weapon control, the MOE borrows the rubber-overmolded surface of the popular MOE+ AR-15/M4 grip to ensure a positive and comfortable hold on the weapon. It is compatible with Magpul Grip Cores for storage customization.   Please note that the Plum kit includes a black version of the MOE AK+ grip.

    HOT!
  • AR-15/M16 ACS-L MIL-SPEC BUTTSTOCKS MAGPUL More Detail

    AR-15/M16 ACS-L MIL-SPEC BUTTSTOCKS MAGPUL

    $75.95$75.95

    Extra-Slim Profile For Added Maneuverability The Adaptable Carbine Stock-Light (ACS-L) is a slimmed-down, lightweight, version of Magpul’s popular ACS stock. The ACS-L provides extra maneuverability by eliminating the ACS’s side storage compartments, while retaining the wide, sloping top for a secure, comfortable cheekweld. Also retained is the storage compartment in the tail of the stock, and the friction locking system that prevents unwanted wobble after extending the stock. Includes a reversible socket for QD pushbutton sling swivels and a 1" sling loop molded in the toe of the stock. The .3" thick rubber recoil pad can be replaced by Magpul Tactical Recoil Pads (sold separately). Models available to fit Mil-Spec (1.14" O.D.) carbine buffer tubes. Buffer tube, carbine buffer, receiver extension nut, and carbine-length action spring not included. AR-15, Issue:11, Page:045 Brownells Christmas , Issue:2X, Page:020 Big Book Catalog, Issue:68, Page:043

    HOT!
  • AR-15/M16 M4 SOCOM BUTTSTOCK DOUBLE STAR More Detail

    AR-15/M16 M4 SOCOM BUTTSTOCK DOUBLE STAR

    $199.99 - $224.99$199.99 - $224.99

    Light & Strong For Fast Handling In Extreme Environments Tactical carbine stock features two full inches of length adjustment. Quick-release button switches the stock length to five different positions. Soft foam cover on tube provides a comfortable cheekweld. Also features three 1 ½” wide sling slots, a rubber recoil pad, and a receiver end plate with ambidextrous attachment points for HK-style single-point clip-on slings. There’s even a machined-in hammer on the butt for breaching doors and hand-to-hand combat. Precision –machined from a solid, heat-treated, aluminum billet for superb durability and strength. Quick release button can be replaced with the included machine screw to convert it into a rock-solid, fixed-length stock. Available in Carbine or Long Extension Tube lengths. AR-15, Issue:11, Page:043 Big Book Catalog, Issue:68, Page:041 Law Enforcement / Police Store, Issue:05, Page:011 New Product Supplement, Issue:564, Page:010

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!