• AR-15 ENHANCED TRIGGERS GEISSELE AUTOMATICS LLC More Detail

    AR-15 ENHANCED TRIGGERS GEISSELE AUTOMATICS LLC

    $199.99$199.99

    B-G2S-E The Geissele 2 Stage Enhanced Trigger (B-G2S-E) provides superior control and helps accuracy while maintaining the robustness and reliability that Geissele triggers are known for. The B-G2S-E gives a smooth, light 1st stage take up of 2.3lbs and a crisp, candy-cane-like 2nd stage break of 1.2lbs. The B-G2S-E is ideal for use in precision Squad Designated Marksman type rifles where weapon accuracy and reliability are critical. B-GRF (Geissele Rapid Fire) The Geissele Rapid Fire Trigger (B-GRF) was developed to give semiautomatic-only rifles a glass-smooth trigger pull very similar to the Geissele Super Select Fire (SSF) trigger designed for the U.S. Special Operations Community .  The B-GRF is a fast-shooting, smooth trigger ideal for 3 Gun competition and recreational shooting alike. It pulls like a single-stage, but resets like a two-stage. Two trigger springs are included so the B-GRF can be set up with a pull of either 4 lbs or 3.2 lbs. Does NOT convert semiautomatic rifles to automatic. Note: The B-GRF trigger has a very short, light pull and reset. It is not recommended for bench rest shooting or shooting small groups. It is designed for CQB-style rapid target engagement and quick follow up shots. AR-15, Issue:11, Page:028 Brownells Christmas , Issue:5X, Page:017 Big Book Catalog, Issue:68, Page:027 Mini-Catalogs, Issue:13, Page:005 Sinclair, Issue:5B, Page:255

    HOT!
  • 10/22® BX-Trigger RUGER More Detail

    10/22® BX-Trigger RUGER

    $74.99$74.99

    The 10/22® BX-Trigger™ features a light, crisp 2.5-3.0 lb trigger pull, with minimal over travel.  Rugged, reliable and safe (meets or exceeds industry standards for drop testing), this new and improved Genuine Ruger® Factory Accessory comes in a completely self-contained module and is easy to install.  The BX-Trigger™ features a Polymer construction and drop-in installation.  Fits Ruger® 10/22® rifles or 22 Charger Pistol.  DO NOT DRY FIRE UNLESS A HAMMER BLOCK IN INSTALLED OR TRIGGER IS INSTALLED IN A RUGER® 10/22® RIFLE. Big Book Catalog, Issue:68, Page:161

    HOT!
  • REMINGTON 700 TRIGGER W/SAFETY CURVED SHOE TIMNEY More Detail

    REMINGTON 700 TRIGGER W/SAFETY CURVED SHOE TIMNEY

    $139.99 - $149.99$139.99 - $149.99

    Provides A Light, Clean Break To Help You Get The Best Possible Accuracy New-design safety blocks the trigger, not the sear. There’s no way to move the trigger when it’s on safe, virtually eliminating the risk of accidental sear release when you take it off safe. Right-hand (RH) and left-hand (LH) models available, both with a 3⁄8” wide, grooved trigger shoe that improves feel and control. Choose a traditional Curved trigger shoe. Adjustable, 11⁄2 to 4 lb. weight-of-pull, creep and backlash. Fully assembled to save time and labor. Includes bolt release. Brownells Christmas , Issue:4X, Page:020 Big Book Catalog, Issue:68, Page:173 Law Enforcement / Police Store, Issue:05, Page:015 Mini-Catalogs, Issue:15, Page:003 New Product Supplement, Issue:556, Page:008 Sinclair, Issue:5B, Page:257

    HOT!
  • AR-15/M16/ 308 AR SSA TRIGGER GEISSELE AUTOMATICS LLC More Detail

    AR-15/M16/ 308 AR SSA TRIGGER GEISSELE AUTOMATICS LLC

    $220.00 - $240.00$220.00 - $240.00

    Two-Stage Trigger With Ultra-Fast Lock Time; Adjustable & Pre-Set ModelsSuper Semi-Automatic (SSA) 2-stage combat trigger has a fixed 4½ lb. total pull weight, non-adjustable sear engagement, and additional safety features ideal for CQB and mid-range carbine work. A secondary “safety sear” captures the hammer if the primary sear accidentally releases due to hard impact, ensuring the rifle can fire only when the shooter actually pulls the trigger. Trigger pull is optimized for both deliberate, aimed fire and quick, “snap shooting.” The first stage builds gradually to 2½ lbs., with a 2 lb. second stage that breaks clean, so the shooter can stay on target throughout the pull. A lightweight hammer driven by a full-power hammer spring speeds locktime and delivers positive ignition of all ammo types. All contact surfaces are wire-EDM cut to exact dimensions for precise engagement free of play. Direct replacement for factory trigger; may be installed without removing the safety. Operation and parts layout is similar to the USGI M16 trigger for easy maintenance. All springs are captive to simplify field disassembly for cleaning. Hammer and trigger pins are a close slip-fit in nominal .154" (small pin) mil-spec receiver holes to enable installation with basic tools. Super Semi-Automatic-Enhanced (SSA-E) offers an even lighter, 3½ lb. total pull weight, making it an excellent choice for precision Squad Designated Marksman type rifles where both accuracy and reliability are critical. First stage builds gradually to 2.3 lbs., followed by a 1.2 lb. second stage with a crisp, “candy cane-like” break. A semi-auto-only version of the Geissele full-auto combat trigger presently used in the U.S. Special Operations community. AR-15, Issue:11, Page:028 Brownells Christmas , Issue:5X, Page:017 Big Book Catalog, Issue:68, Page:027 Mini-Catalogs, Issue:02, Page:009 Sinclair, Issue:4X, Page:020

    HOT!
  • AR-15 ENHANCED MILITARY-STYLE TRIGGERS ALG DEFENSE More Detail

    AR-15 ENHANCED MILITARY-STYLE TRIGGERS ALG DEFENSE

    $49.00 - $69.00$49.00 - $69.00

    Gives A Smoother Pull While Preserving Reliability Trigger/hammer kits feature rugged military-type components carefully prepped to give a smoother trigger pull while maintaining the original geometry for maximum reliability. These are “enhanced standard” triggers, so the armorer continues to work with the configuration he’s accustomed to. The QMS (Quality Mil-Spec) set has the sear contact surface precision-honed to smooth and lighten the pull to around 6½ lbs. The ACT (ALG Combat Trigger) adds nickel-boron coating on the trigger and nickel-Teflon coating on the hammer, disconnnector, and pins to increase surface hardness and reduce friction, with an average pull weight of about 6 lbs. AR-15, Issue:11, Page:027 Brownells Christmas , Issue:2X, Page:005 Big Book Catalog, Issue:68, Page:026 Mini-Catalogs, Issue:13, Page:015 Sinclair, Issue:5B, Page:255

    HOT!
  • AR-15 DROP-IN TRIGGER MODULE SOLID SHOE TIMNEY More Detail

    AR-15 DROP-IN TRIGGER MODULE SOLID SHOE TIMNEY

    $219.99 - $224.99$219.99 - $224.99

    Obtain A Super-Smooth Pull & Crisp Letoff In Minutes Self-contained module is ready to install in your small-pin AR and deliver an exceptionally smooth, crisp, creep-free single-stage trigger pull that feels more like a traditional bolt action than a combat rifle trigger. 100% drop-in—no gunsmithing, fitting, or adjusting required. All components are captive in the lightweight, aluminum alloy housing. Hammer is wire-EDM machined from S7 tool steel that combines hardness to resist wear with superior impact resistance to withstand heavy use without chipping or breaking. Other components are EDM cut from A2 tool steel, then heat treated to Rc 56-60 for long service life. Precision-ground engagement surfaces ensure superb reliability and a crisp, clean hammer release. Installs using your rifle’s original hammer/trigger pins; proprietary design eliminates pin walkout. Available with standard solid trigger shoe with choice of 3 lb, 4 lb. or 4.5 lb. pull weight. NOTE: For use in a polymer lower, a special plate is required which can be obtained directly from Timney at (623) 223-1111. AR-15, Issue:11, Page:029 Brownells Christmas , Issue:2X, Page:020 Big Book Catalog, Issue:68, Page:028 Mini-Catalogs, Issue:02, Page:009 New Product Supplement, Issue:631, Page:003 Sinclair, Issue:5B, Page:254

    HOT!
  • REMINGTON 700/40X & WIN M70 RIFLE TRIGGERS JEWELL TRIGGERS, INC. More Detail

    REMINGTON 700/40X & WIN M70 RIFLE TRIGGERS JEWELL TRIGGERS, INC.

    $189.99 - $249.99$189.99 - $249.99

    Fully Adjustable, Finest Quality For A Light, Reliable Trigger Pull Self-contained replacement trigger module provides outstanding reliability, function, and performance for benchrest, varminting, and other types of precision shooting. All internal components are CNC machined from stainless steel, then heat-treated to Rc 58 for extended service life. Adjustment screws are fitted with a nylon insert to maintain your trigger settings without using thread locking compounds. Single-stage design is three-way externally adjustable, eliminating the need to remove the barreled action from the stock to set pull weight, let-off, or overtravel. Remington Hunter Varmint Rifle (RHVR) includes top lever safety and bottom bolt release. Fits Remington 700/40x rifles, right-hand actions only. Remington Bench Rest (BR) is designed exclusively for match shooting, and includes no safety or bolt release.Fits Remington 700/40x rifles, right-hand and left-hand actions. Winchester Hunter Varmint Rifle (WHVR) fits both Pre- and Post ‘64 Winchester M70 rifles, right- and left-hand actions which were manufactured in New Haven CT. It WILL NOT fit the MOA trigger group rifles made since 2008. Uses existing safety. Big Book Catalog, Issue:68, Page:171 Law Enforcement / Police Store, Issue:13, Page:008 New Product Supplement, Issue:593, Page:006 Sinclair, Issue:5B, Page:256

    HOT!
  • AR-15 SUPER DYNAMIC TRIGGERS GEISSELE AUTOMATICS LLC More Detail

    AR-15 SUPER DYNAMIC TRIGGERS GEISSELE AUTOMATICS LLC

    $230.00 - $260.00$230.00 - $260.00

    The Super Dynamic (SD)triggers have the same body geometry as the SSA models and feature a flat trigger shoe that reduces perceived pull weight, improves control, and gives excellent tactile feedback. Super Dynamic Combat (SD-C) trigger has a 2.5 lb. first stage and a 2 lb. second stage for a 4.5 lb total pull weight with a sharp, repeatable trigger release. Super Dynamic Enhanced (SD-E) trigger has a combined 3.5 lb. total pull weight, with a 2.3 lb. first stage and a 1.2 lb. second stage. Super Dynamic 3-Gun (SD-3G) single-stage trigger has 3.5 lb. pull weight with a short pull length and short reset - excellent for fast-action competitions. AR-15, Issue:11, Page:028 Big Book Catalog, Issue:68, Page:027

    HOT!
  • AR-15 REDUCED POWER SPRING KIT J P ENTERPRISES More Detail

    AR-15 REDUCED POWER SPRING KIT J P ENTERPRISES

    $10.99$10.99

    Gives A Smooth, Light Trigger Pull Reduced-power springs provide a 3.5 pound trigger pull when used with J.P. triggers, and a pull of 4.5 to 5 pounds when used with standard trigger components. Includes hammer spring, trigger return spring, and disconnector spring. Installation instructions also explain engagement surface polishing to obtain a smooth, reliable trigger. This spring setup will give good ignition reliability with domestically manufactured ammunition and properly seated primers. Do not use foreign-manufactured ammunition because the primers in such ammo are often extremely hard and will give poor ignition with this spring kit. These springs are designed for recreational use ONLY and should NOT be installed in a Duty or Home Defense firearm where reliability is foremost. AR-15, Issue:11, Page:031 Brownells Christmas , Issue:3X, Page:002 Big Book Catalog, Issue:68, Page:030 Law Enforcement / Police Store, Issue:09, Page:013 Mini-Catalogs, Issue:02, Page:009 New Product Supplement, Issue:543, Page:000 Sinclair, Issue:5B, Page:254

    HOT!
  • AR-15 BCMGUNFIGHTER™ PNT TRIGGER BRAVO COMPANY More Detail

    AR-15 BCMGUNFIGHTER™ PNT TRIGGER BRAVO COMPANY

    $59.95$59.95

    The BCM PNT Trigger and Hammer are built to surpass Mil-Spec standards without compromising the reliability of the USGI TDP(Technical Data Package). Each PNT Trigger and Hammer is heat treated in a three step process and hardened for optimal grain structure alignment, surpassing commercial "equivalents" in both durability and performance. To create a perfect alignment and smooth trigger pull, the BCM PNT Trigger and Hammer bores are honed to perfection and the impact resistant trigger and hammer pins are centerless ground to a fine finish with superior tolerances. The BCM Disconnector is stamped from 1070 material and fine blanked for cleaner edges and double disc ground to precise size to ensure consistent and reliable operation. Hand polished sear engagement surfaces reduce friction an additional 300% beyond the Mil-Spec. An electroless nickel finish reduces felt creep and cleans up the grittiness commonly associated with the press in a Mil-Spec trigger. Teflon particles embedded in the nickel, further reduce friction in the interface and double down on a finish that is corrosion, rust and oxidation resistant.

    HOT!
  • AR-15/308 AR HIPERTOUCH TRIGGER HIPERFIRE More Detail

    AR-15/308 AR HIPERTOUCH TRIGGER HIPERFIRE

    $215.00 - $235.00$215.00 - $235.00

    Gives A Lighter Trigger Pull With Increased Hammer Energy Single-stage trigger offers shorter pre-travel, faster reset, and increased hammer energy. Dual coil springs across the top of the trigger to reduce friction on the sear and increase hammer striking power by 35% over factory trigger. Includes interchangeable color-coded springs to adjust pull weight from 2-1/2 to 4-1/2 lbs. 24 Elite is designed for law enforcement, military, and precision shooters. 24 Competition is ideal for competitive shooters and features further reduced pre-travel and a straight trigger with an adjustable finger pad. Pad can be set at five different positions for enhanced adjustment of pre-travel and trigger weight. Can be installed with or without the pad. AR-15, Issue:11, Page:029 Big Book Catalog, Issue:68, Page:028 Sinclair, Issue:5B, Page:255

    HOT!
  • AR-15 TACTICAL TRIGGER GROUP CMC More Detail

    AR-15 TACTICAL TRIGGER GROUP CMC

    $179.99$179.99

    Drop-In Trigger Module Is Factory Tuned For A Super Smooth, Clean-Breaking Pull Self-contained, drop-in trigger module replaces the heavy factory trigger found in many commercial AR-15s and delivers a crisp, pre-set 3½ lb. pull. Designed by competition shooter Chip McCormick to provide all the advantages of a fine, match-grade, single-stage trigger without having to fit and adjust multiple components. Rigid, steel, trigger housing holds all the factory-tuned, internal components in proper alignment for easy, fast installation. Generous, precision-ground sear/hammer engagement surfaces provide a remarkably clean, crisp release while preserving reliable function. Each trigger assembly is tweaked at the factory to minimize take-up and over-travel. Threaded sleeves provide ultra-smooth pivot surfaces for the hammer and trigger. Two, slightly oversized center pins replace the standard, trigger/hammer pins to save wear, reduce friction, and prevent trigger wobble; Chicago-style screws to prevent pin walk. Available with traditional Curved trigger shoe, or skeletonized Flat shoe that provides a different feel some shooters prefer and gives your AR a distinctive look. AR-15, Issue:11, Page:027 Big Book Catalog, Issue:68, Page:026 Law Enforcement / Police Store, Issue:05, Page:016 New Product Supplement, Issue:631, Page:003 Sinclair, Issue:5B, Page:254

    HOT!
  • AR-15 GEN. 2 MOD. 2 NON-ROTATING PIN SET KNS PRECISION, INC. More Detail

    AR-15 GEN. 2 MOD. 2 NON-ROTATING PIN SET KNS PRECISION, INC.

    $29.99$29.99

    Precision-Machined To Upgrade Your Existing Hammer & Trigger Pins Identical function as the standard sets listed above, but with ultra-low-profile links that protrude even less above the receiver. Available with standard .154" diameter pins, oversized .155" pins, or .170" pins for large-pin receivers. AR-15, Issue:11, Page:030 Big Book Catalog, Issue:68, Page:029 Law Enforcement / Police Store, Issue:09, Page:014

    HOT!
  • AR-15/M16 TWO-STAGE TRIGGERS GEISSELE AUTOMATICS LLC More Detail

    AR-15/M16 TWO-STAGE TRIGGERS GEISSELE AUTOMATICS LLC

    $165.00$165.00

    Complete, High-Quality Trigger Systems For Unique Operating Environments G2S TRIGGER – The Geissele 2 Stage (G2S) semi-auto-only trigger drops into your AR-15 to give much of the performance and reliability of Geissele’s proven SSA trigger at an economical price. Features a 4½ lb. total pull weight, non-adjustable sear engagement, and a 2½ lb. first stage. Made of the same tool steel as the SSA with wire-EDM cut engagement surfaces. G2S uses a different method to retain the hammer pin, different pins, and lacks laser marking.   AR-15, Issue:11, Page:028 Big Book Catalog, Issue:68, Page:027 Sinclair, Issue:5B, Page:255

    HOT!
  • REMINGTON 700 CALVIN ELITE TRIGGER TIMNEY More Detail

    REMINGTON 700 CALVIN ELITE TRIGGER TIMNEY

    $219.99$219.99

    Self-contained drop in trigger. Lightweight 6061-T6 CNC Machined aluminum housing with Wire EDM cut, Heat treated Tool steel trigger and sears. Featuring a double sear design. Timney Golden Elite colored housing. Two position, trigger blocking side safety. Fully adjustable Sear Engagement, Over-travel, and pull weight from 8oz.-2.5lbs. Available in blue(black) and Nickel Plated. Teflon nickel coated Sears to guarantee a lifetime of reliable service. Backed by the Legendary Timney Lifetime No Hassle Warranty and Customer service. Big Book Catalog, Issue:68, Page:173 Mini-Catalogs, Issue:15, Page:003 Sinclair, Issue:5B, Page:257

    HOT!
  • TRIGGER-HAPPY KIT WILD WEST GUNS More Detail

    TRIGGER-HAPPY KIT WILD WEST GUNS

    $119.99$119.99

    Gives A Light, Clean Break, Without The "Flop" Precision, EDM trigger and hand polished sear provide a crisp, clean 2 to 3 pound trigger pull. Unique, two-piece design eliminates annoying flop of the Marlin factory trigger. Produced to minimum tolerances, gives a safe, light trigger that helps improve accuracy for hunters; helps give Cowboy shooters that winning edge. Drop-in fit; installation requires complete action disassembly. Will only replace Marlin Centerfire 2 piece triggers, does not fit early Marlins with a 1 piece trigger. Big Book Catalog, Issue:68, Page:174 Cowboy Action, Issue:03, Page:001 New Product Supplement, Issue:611, Page:008

    HOT!
  • AR-15/M16 GOLD TRIGGER MODULE AMERICAN TRIGGER CORPORATION More Detail

    AR-15/M16 GOLD TRIGGER MODULE AMERICAN TRIGGER CORPORATION

    $283.99$283.99

    Drop-In Fire Control System Gives A Light, Safe, Match-Grade PullSelf-contained trigger/assembly installs in minutes and delivers a light, smooth, match-grade trigger pull free of grittiness, with an ultra-crisp letoff and short reset. Simply remove factory trigger and safety selector, drop in the module, reinstall selector and pins, and you’re ready to shoot. Completely new engagement geometry produces a light 3-lb. pull and crisp release without compromising reliability or safety. The two-stage design is adjustable for sear engagement, with a first-stage takeup of approximately 6 ounces, followed by actual sear movement taking up the rest of the weight—the reverse of the military two-stage AR trigger pull profile. Instead, the shooter can build force steadily, maintaining precise control and keeping his attention on the target. After release, reset travel is only .030", less than half the .070" typical of standard match triggers, to aid in fast, accurate follow-up shots. The sear captures the hammer at the back instead of near the pivot point to help produce the light pull and maintain safety. A second, independent, intercepting sear is positioned to block the hammer if it slips off the primary sear, as when the weapon is dropped or suffers hard impact. If the intercepting sear captures the hammer, pulling the trigger will still fire the rifle, though with a heavier pull weight. In addition, the Gold system uses the rifle’s factory safety to positively capture the hammer, like an M1 Garand, and roll it back below the primary sear for an extra margin of safety. A lightweight aluminum housing contains the entire system and maintains the correct tolerances between the working parts. The receiver pins serve only to anchor the module in the receiver, with no effect on trigger function. AR-15, Issue:11, Page:027 Big Book Catalog, Issue:68, Page:026 Law Enforcement / Police Store, Issue:13, Page:008 Sinclair, Issue:5B, Page:255

    HOT!
  • TAVOR SUPER SABRA TRIGGER GEISSELE AUTOMATICS LLC More Detail

    TAVOR SUPER SABRA TRIGGER GEISSELE AUTOMATICS LLC

    $350.00$350.00

    Enhances Trigger Control For Precise Long-Range Targeting Drop-in replacement trigger gives your Tavor an upgraded, two-stage trigger pull that gives you smoother, more precise trigger control. Two-stage configuration allows the Super Sabra to be light and controllable enough for accurate distance shots, but forgiving enough for CQB. The first stage is user-adjustable, so you can tune the first/second stage weight distribution without compromising the total pull weight. First stage can be adjusted to 3.5-5.5 lbs.; second stage is fixed at 2 lbs. Total pull weight can be adjusted from 5.5 to 7.5 lbs. The Super Sabra trigger pack is contained in an aluminum housing for easy installation, while keeping the tool steel internal components held in correct alignment. Nitride process finish on internal parts gives superb abrasion resistance. Lightning Bow® replaces the factory trigger shoe works with the Super Sabra to produce a truly two-stage trigger pull with a match-grade feel. A setscrew lets you remove the slack common to the Tavor factory trigger mechanism, producing a feel very similar to that of the M4 Carbine. NOTE: This is a Generation 2 trigger pack that is fully compatible all IWI Tavor Rifles. Big Book Catalog, Issue:68, Page:171 Mini-Catalogs, Issue:13, Page:003

    HOT!
  • AR-15 AR CUSTOM TRIGGER KIT JARD More Detail

    AR-15 AR CUSTOM TRIGGER KIT JARD

    $149.99$149.99

    Four-Way Adjustment; Improves Trigger Function & AccuracySingle-stage trigger kit reduces pull weight to improve accuracy, without gunsmith fitting. 2, 3, and 4.5 lb. models provide the perfect pull weight for hunting or competition. Adjustments for sear engagement, trigger over-travel, disconnector engagement and safety lets you achieve a smooth, consistent trigger pull. Sear engagement point located behind the hammer improves leverage to reduce pull weight; low mass hammer gives faster lock time. Engagement surfaces are hardened and polished for a smooth, clean-breaking pull. Trigger requires gunsmith fitting in receivers with a sear block. AR-15, Issue:11, Page:028 Big Book Catalog, Issue:68, Page:027 Law Enforcement / Police Store, Issue:08, Page:007 New Product Supplement, Issue:566, Page:015

    HOT!
  • AR-15 HIPERTOUCH ENHANCED DUTY TRIGGER HIPERFIRE More Detail

    AR-15 HIPERTOUCH ENHANCED DUTY TRIGGER HIPERFIRE

    $89.00$89.00

    The HIPERTOUCH EDT fire-control drop-in is a high performance, high precision, service rifle upgrade that installs in AR-15 type rifles. The HIPERTOUCH name is short for HIgh PERformance TOUCH and EDT for Enhanced Duty Trigger. The EDT is user-adjustable to 4½ plus and 5½ plus lbs by simply interchanging two hammer springs. “Plus” means that even after a period of break-in and/or heavy use, the trigger weight will always stay above the two thresholds. AR-15, Issue:11, Page:029 Big Book Catalog, Issue:68, Page:028

    HOT!
  • AR-15/M16 TACTICAL TRIGGER UNIT WILSON COMBAT More Detail

    AR-15/M16 TACTICAL TRIGGER UNIT WILSON COMBAT

    $269.95 - $269.99$269.95 - $269.99

    Match-Grade Pull From A Rugged, Reliable Drop-In Module Drop-in trigger module fits any mil-spec small-pin AR-15 and delivers a light, superbly crisp trigger pull right from the box, with no adjustment or fine-tuning. Crisp, 4-lb. pull is safe enough for tactical operations and combat, yet light enough to ensure an ultra-clean break that’s closer to a bolt action than a typical tactical rifle. Exceptionally short, positive reset gets you back on target and ready to take the next shot almost instantly. Unique hammer geometry keeps weight to a minimum for ultra-fast lock time, yet provides plenty of kick to ensure reliable ignition, even on hard military primers. A secondary “rescue” sear grabs the hammer if the primary sear fails when the weapon is dropped or severely jarred—meets military specifications for drop safety. CNC-machined, hardened tool steel hammer, sear, and trigger body with precision-ground contact surfaces are built to run hard in competition or combat, all contained in the rugged machined aluminum housing. TR-TTU - Single-stage pull has zero take-up and an ultra-clean break. TR-TTU-M2 - “Semi” two-stage, match-grade trigger has an abbreviated initial stage that establishes sear engagement for safe, reliable operation in high-stress tactical environments, followed by a clean second-stage release. TR-TTU-MIL - Single-stage with ultra crisp 5 to 5 ¾ lb trigger pull. Positive reset guarantees fast follow-up shots. TR-TTU-3G- Wilson Combat engineers have enhanced the TTU-3G trigger with a smooth, rolling, creep-free 3.5-4# break that is ideal for shooting rapid double-taps on the move from your high-performance AR-15. The 3.5# - 4# pound pull breaks with the extreme smoothness of finely tuned target-pistol trigger and has tactile feedback that gives a shooter the confidence to prep the trigger face during quick target transitions. The TTU-3G also has an enhanced, lightning-fast trigger reset that will make fast follow up shots a breeze and eliminate "trigger freeze" during the heat of competition or tactical shooting. The TR-TTU-H2 Paul Howe model is a drop-in, two stage trigger with a ultra-crisp 4.5-5lb break. AR-15, Issue:11, Page:029 Big Book Catalog, Issue:68, Page:028

    HOT!
  • AR-15/M16/ 308 AR HI-SPEED TRIGGER GEISSELE AUTOMATICS LLC More Detail

    AR-15/M16/ 308 AR HI-SPEED TRIGGER GEISSELE AUTOMATICS LLC

    $279.00 - $330.00$279.00 - $330.00

    Precision-Adjustable Two-Stage Trigger With Ultra-Fast Lock Time Fully adjustable trigger gives a smooth, two-stage pull with a precise “icicle sharp” break and ultra-fast lock time to minimize accuracy loss caused by gun movement during trigger pull. Set first stage pull weight by bending the legs of the trigger spring; set second-stage weight within a pre-set range by turning its adjustment screw. Another screw on the trigger lets you adjust overtravel for clean, crisp letoff. Lightweight hammer provides a 50% reduction in lock time over factory hammer, yet uses standard weight hammer spring to ensure sufficient energy transfer for reliable primer ignition, even on AR-style .308 weapons. Trigger shoe is positioned 1/8" farther forward than factory shoe for comfortable finger position during the squeeze. All contact surfaces are wire EDM cut to exact dimensions for full, precise engagement free of unwanted play. Available to fit both large (.169") and small (.154") pin receivers; small pin models include spare hammer pin to aid in proper fit on receivers with slightly oversized holes. Service model provides nominal 4½ lb. pull weight required for NRA High Power Service Rifle competition and is also approved for CMP-sanctioned competitions. Most of the pull weight is loaded on the first stage, followed by a quick, clean second-stage break. First stage, 3.2 to 5 lb.; second stage, ½ to 1½ lb. Match model allows a very low combined pull weight for superb trigger control on highly modified raceguns used in unlimited NRA High Power Rifle competition. Helps you shave those extra hundredths of an inch from your groups for a competitive edge. First stage, 1.3 to 3 lbs.; second stage, 4 oz. to 14 oz. Designated Marksman Rifle (DMR) model combines the light first stage of the Match trigger with the heavier Service second stage to reduce risk of premature release in high stress situations. Perfect for precision tactical and competitive shooting where trigger pull is not regulated. Allows a high rate of semi-auto fire; an experienced shooter can fire 30 rounds in as little as 4½ seconds. First stage, 2.3 to 3.6 lbs.; second stage, ½ to 1½ lbs. AR-15, Issue:11, Page:028 Big Book Catalog, Issue:68, Page:027 Law Enforcement / Police Store, Issue:09, Page:011 Law Enforcement / Police Store, Issue:09, Page:012 New Product Supplement, Issue:611, Page:004 Sinclair, Issue:5B, Page:254

    HOT!
  • AR-15/M16 MOE™ TRIGGERGUARD MAGPUL More Detail

    AR-15/M16 MOE™ TRIGGERGUARD MAGPUL

    $8.50$8.50

    Provides Extra Clearance When Wearing Gloves; Drop-In Installation Enhanced triggerguard has a shallow “V” shape that provides extra clearance for a shooter wearing gloves, and eliminates the gap at the rear of the USGI triggerguard that can trap or pinch finger. Smooth, ergonomically contoured surface and rounded edges protect the trigger finger from abrasion and won’t snag on the operator’s glove to impede the speed of target engagement. Replaces factory guard in minutes and requires no permanent alterations to receiver; reinstall original guard any time. Manufactured from high-grade, reinforced polymer that’s lightweight, almost as strong as aluminum, and resistant to heat, cold and moisture. Fits mil-spec AR-15/M16 and clones, as well as many AR-style .308 models; installation instructions included. AR-15, Issue:11, Page:030 Big Book Catalog, Issue:68, Page:029 Law Enforcement / Police Store, Issue:09, Page:055 New Product Supplement, Issue:621, Page:005

    HOT!
  • SUPER SCAR TRIGGER GEISSELE AUTOMATICS LLC More Detail

    SUPER SCAR TRIGGER GEISSELE AUTOMATICS LLC

    $325.00$325.00

    The Geissele Super SCAR trigger is a semi-automatic trigger that Geissele has developed as a retrofit for the FN SCAR 16 and FN SCAR 17. The Geissele Super SCAR trigger is designed to only fit into the standard polymer trigger housing manufactured by FN. The SCAR trigger is a non-adjustable, two-stage trigger but it is not a Match trigger. The Geissele SCAR trigger is ideally suited for Close Quarters Battle (CQB) and mid-range work. Comes with Aeroshell #6 Lubricant. Big Book Catalog, Issue:68, Page:171

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!