• HEADSPACE GAUGES FORSTER More Detail

    HEADSPACE GAUGES FORSTER

    $28.99 - $35.99$28.99 - $35.99

    Absolutely Essential For Accurate, Safe, Chamber Work The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight, accurate, safe chamber. Whenever you buy a used gun, always check the headspace before firing. Forster gauges are made to SAAMI specs. 100-010-715 - This gauge is .0005 inch (5/10,000 inch) under 7.62 NATO specification for NO-GO dimensions for safety. AR-15, Issue:11, Page:087 Big Book Catalog, Issue:68, Page:088 Big Book Catalog, Issue:68, Page:495 Law Enforcement / Police Store, Issue:01, Page:015 New Product Supplement, Issue:602, Page:022

    HOT!
  • STAINLESS ULTIMATE TRIMMER SINCLAIR/L.E. WILSON More Detail

    STAINLESS ULTIMATE TRIMMER SINCLAIR/L.E. WILSON

    $189.99$189.99

    The legendary L.E. Wilson Case Trimmer has just gotten better. Exclusive to Sinclair International, the L.E. Wilson Case Trimmer is now offered in a Stainless Steel model. We’ve paired the most accurate trimmer in the world with our Sinclair Micrometer head to create the Sinclair Stainless Ultimate Trimmer. The L.E. Wilson Case Trimmer aligns and holds your cases square to the cutter during the trim process. This results in a virtually identical trim length for each case. It is accomplished with L.E. Wilson’s unique case holder system which holds the case by the body taper. The trimmer case holder, cutter housing, and micrometer adjustment unit sit in perfect alignment. No pilots or collets are utilized which could influence the trim results negatively. Now in stainless steel, the L.E. Wilson Trimmer is built to last for a lifetime of use. Our Sinclair Micrometer head allows the reloader to easily adjust trim length in increments of .001" with an adjustment length of over 2". Our micrometer reads in “actual” case length, making it the most pleasurable micro trimmer to work with. Determine your trim length, dial to the exact length on the micrometer, and you’re ready – it’s that simple. The micrometer features crisp, easy-to-read engravings and may be locked in place when set. Easily accommodates cases from 22 Hornet to 416 Rigby. When trimming cases shorter than 1.3” such as pistol cases, the use of a spacer (#749-002-094) is necessary. Completing the Sinclair Stainless Ultimate Trimmer is our Sinclair Mounting Stand with Shark Fin Clamp. This system makes easy work of installing and removing your trimmer case holder in a smooth “swing-arm” motion. The Shark Fin trimmer clamp secures the case head firmly against the micrometer adjustment head for a quick and accurate, chatter-free trim. * Trimmer Case Holders and accessories sold separately. Brownells Christmas , Issue:4X, Page:018 Big Book Catalog, Issue:68, Page:529 Mini-Catalogs, Issue:15, Page:017 Sinclair, Issue:5B, Page:010

    HOT!
  • MATCH RIFLE HEADSPACE GAUGES FORSTER More Detail

    MATCH RIFLE HEADSPACE GAUGES FORSTER

    $28.99$28.99

    In .001" Increments For Precise Measurement Of "Match Grade" Chambers Lets you know the exact headspace dimension on any rifle chambered in .308 Win., .223, or .22LR. Covers every size chamber all the way from Go to Field, in .001" increments. Perfect for match shooters, armorers, or sportsmen looking for the most accurate, and reliable way to track locking lug and chamber wear on high quality, match grade barrels. Each gauge is precision-ground to the exact tolerance listed. MIXING AND MATCHING BRANDS OF HEADSPCAE GAUGES Don't do it !! That's the short answer, here's why. It boils down to tolerance stacking. Each Headspace Gauge manufacturer works within a range specified by SAAMI. Manufacturer "A" may work at the high end of the range while Manufacturer "B's" gauges are in the middle of the tolerance range. Mixing the two could give an inaccuratereading. By sticking with one brand within a particular caliber, you will eliminate a variable. If you have a Forster, .308 GO gauge, get a Forster, .308 NO GO. Use Clymer with Clymer and Manson Precision with Manson Precision, etc. You can use any brand of headspace gauge with any other brand of chambering reamer. e.g. Forster Headspace Gauges with Clymer Reamers, Manson Precision Gauges with JGS Reamers, etc. AR-15, Issue:11, Page:087 Big Book Catalog, Issue:68, Page:088 Big Book Catalog, Issue:68, Page:495 Law Enforcement / Police Store, Issue:01, Page:015

    HOT!
  • SINCLAIR CONCENTRICITY GAUGE SINCLAIR INTERNATIONAL More Detail

    SINCLAIR CONCENTRICITY GAUGE SINCLAIR INTERNATIONAL

    $89.99 - $149.99$89.99 - $149.99

    We believe the Sinclair Concentricity Gauge is the easiest to use and most accurate gauge of its kind on the market. Precision made for a lifetime of use, the Sinclair Concentricity Gauge will accept cases up to 50 BMG. The Sinclair Concentricity Gauge is used to measure runout by rotating the case or loaded round on two sets of bearings that are captured in anodized aluminum blocks. These bearing blocks are adjustable longitudinally to allow for different case lengths or varying lengths of loaded rounds. The handloader can measure sized cases on the neck, and measure loaded rounds on the neck or out on the bullet. The bearing blocks ride in a milled slot in the gauge base plate. This milled slot keeps the blocks in alignment with each other. This arrangement provides the best support for the cartridge, enabling the user to spin the cartridge smoothly. Large thumb levers on the bearing blocks make adjustments quick and easy. The anodized base plate is extremely stable allowing the user to take accurate readings. The indicator tower is designed to permit vertical and side-to-side adjustment of the dial indicator. The mounting block for the dial indicator is designed to accommodate dial indicators with standard 0.375" mounts. This is a quality measuring tool for the serious precision reloader. Big Book Catalog, Issue:68, Page:532 Mini-Catalogs, Issue:15, Page:017 Sinclair, Issue:5B, Page:029

    HOT!
  • T-7 TURRET PRESS REDDING More Detail

    T-7 TURRET PRESS REDDING

    $18.99 - $299.99$18.99 - $299.99

    The T-7 Turret Press features a seven station turret head, cast iron construction, and powerful compound linkage. Its rear casting supports a rock solid turret for precise alignment. The T-7 incorporates a one inch diameter ram and accepts 7/8 inch to fourteen inch threaded dies, including the longer Competition dies. Additional interchangeable turret heads may be purchased. This is the only turret press we recommend buying. The Automatic Primer Feed Assembly sold separately. 1911, Issue:11, Page:067 Brownells Christmas , Issue:4X, Page:017 Big Book Catalog, Issue:68, Page:536 Mini-Catalogs, Issue:15, Page:019 Sinclair, Issue:5B, Page:059

    HOT!
  • WILSON CASE GAGE L.E. WILSON, INC. More Detail

    WILSON CASE GAGE L.E. WILSON, INC.

    $26.99 - $46.99$26.99 - $46.99

    The most important use of a cartridge case gage is for setting up 7⁄8"-14 press type full length resizing dies. A common error in reloading is to oversize your brass. Headspace of fired cases can quickly and accurately be measured using this tool and a caliper. Regular Style: This one piece gage will check overall length to indicate a need for trimming and datum to head length to assure correct headspace to prevent over sizing. Adjustable Style: For belted mags. While the belt provides support for proper headspace, the life of the case will drastically shorten unless resizing is held to a minimum at the shoulder. SPECIAL ORDER CASE GAGES ARE AVAILABLE---MEASURE CASE LENGTH ONLY Brownells Christmas , Issue:4X, Page:019 Big Book Catalog, Issue:68, Page:532 Mini-Catalogs, Issue:15, Page:019 Sinclair, Issue:5B, Page:035 Sinclair, Issue:5B, Page:079

    HOT!
  • ULTIMATE TRIMMER & PLATFORM KIT SINCLAIR/L.E. WILSON More Detail

    ULTIMATE TRIMMER & PLATFORM KIT SINCLAIR/L.E. WILSON

    $199.99$199.99

    SINCLAIR STAINLESS ULTIMATE TRIMMER - The legendary L.E. Wilson Case Trimmer has just gotten better. Exclusive to Sinclair International, the L.E. Wilson Case Trimmer is now offered in a Stainless Steel model. We’ve paired the most accurate trimmer in the world with our Sinclair Micrometer head to create the Sinclair Stainless Ultimate Trimmer. The L.E. Wilson Case Trimmer aligns and holds your cases square to the cutter during the trim process. This results in a virtually identical trim length for each case. It is accomplished with L.E. Wilson’s unique case holder system which holds the case by the body taper. The trimmer case holder, cutter housing, and micrometer adjustment unit sit in perfect alignment. No pilots or collets are utilized which could influence the trim results negatively. Now in stainless steel, the L.E. Wilson Trimmer is built to last for a lifetime of use. Our Sinclair Micrometer head allows the reloader to easily adjust trim length in increments of .001" with an adjustment length of over 2". Our micrometer reads in “actual” case length, making it the most pleasurable micro trimmer to work with. Determine your trim length, dial to the exact length on the micrometer, and you’re ready – it’s that simple. The micrometer features crisp, easy-to-read engravings and may be locked in place when set. Easily accommodates cases from 22 Hornet to 416 Rigby. When trimming cases shorter than 1.3” such as pistol cases, the use of a spacer (part number WX11) is necessary. Completing the Sinclair Stainless Ultimate Trimmer is our Sinclair Mounting Stand with Shark Fin Clamp. This system makes easy work of installing and removing your trimmer case holder in a smooth “swing-arm” motion. The Shark Fin trimmer clamp secures the case head firmly against the micrometer adjustment head for a quick and accurate, chatter-free trim. * Trimmer Case Holders and accessories sold separately. PLATFORM - The idea for this platform originated from a writer/customer of ours. The platform is a mounting board for the L.E. Wilson trimmer series that provides storage space for nine (9) case holders and a tapping block for knocking the cases out of the holder. The polyethylene platform has rubber feet, but most of us prefer it c-clamped to the bench. Brownells Christmas , Issue:4X, Page:018 Big Book Catalog, Issue:68, Page:529 Mini-Catalogs, Issue:15, Page:017 Sinclair, Issue:5B, Page:010

    HOT!
  • TYPE S MATCH BUSHING FULL DIE SETS REDDING More Detail

    TYPE S MATCH BUSHING FULL DIE SETS REDDING

    $161.99 - $239.99$161.99 - $239.99

    The Redding Type S Match Bushing Full Die Set contains a Type S Bushing Full Sizing Die and a Compeition Seating Die. The Type S Bushing Full Die allows full length resizing while maintaining exact control of the case neck. Interchangeable bushings allow you to determine your own level of sizing and neck tension. The Competition Bullet Seating Die features a micrometer calibrated in .001" increments and floating seating stem system which help eliminate concentricity problems.   Big Book Catalog, Issue:68, Page:534 Mini-Catalogs, Issue:15, Page:018 Sinclair, Issue:5B, Page:038

    HOT!
  • TYPE S BUSHING FULL DIES REDDING More Detail

    TYPE S BUSHING FULL DIES REDDING

    $59.99 - $159.99$59.99 - $159.99

    Full Length resizing while maintaining exact control of the case neck is oftern desirable in one operation. The Redding Type S Bushing Full Length Sizing Dies accomplish this task with the precision you would expect from Redding. Uses the same interchangeable bushings as those used in Redding bushing style neck sizing dies. The adjustable decapping rod allows you to adjust the bushing position, sizing only part of the neck length when desired Concentricity is enhanced by the ability of the bushing to self-center on the neck of the cartridge case All Type S dies are supplied with both the standard size button and a decapping pin retainer. By removing the bushing and all internal parts, the Type S Bushing Full Die may also be used as a body die.   Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:038 Sinclair, Issue:5B, Page:044

    HOT!
  • COMPETITION BUSHING NECK DIE SETS REDDING More Detail

    COMPETITION BUSHING NECK DIE SETS REDDING

    $239.99 - $341.99$239.99 - $341.99

    Redding Competition Bushing Neck Die Set includes a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater. Neck Sizing Die and Seater feature micrometer adjustments. Bushings and Shellholder sold separately. Competition Bushing Neck Die -  With this die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chambered, sliding sleeve as it moves upward while the resizing bushing self-centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a linear support much like that of a firing pin. Meanwhile, the micrometer adjustment of the bushing position delivers precise control to the desired amount of neck length to be sized. Body Die -designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. Competition Bullet Seater - Tighter manufacturing tolerances have been made possible due to the details of the floating seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to "float" Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:036 Sinclair, Issue:5B, Page:038

    HOT!
  • CHARGEMASTER POWDER DISPENSER / SCALE COMBO RCBS More Detail

    CHARGEMASTER POWDER DISPENSER / SCALE COMBO RCBS

    $349.99 - $389.99$349.99 - $389.99

    Throws Precise, Consistent Powder Charges; Programmable Memory Stores Your Favorite Loads Automated powder measure system combines two precision RCBS products – the Chargemaster 1500 Scale and Chargemaster Automatic Powder Dispenser – that let you meter out exact charges of smokeless powder for almost any-size cartridge. Accurately weighs and dispenses from 2 to 300 grains of any extruded (stick), ball (spherical), and flake smokeless powder. Not only accurate but fast, too, for a “trickle” dispenser: average dispensing time is about 20 seconds for a 60 grain extruded powder charge.    Electronic control lets you simply punch in the exact-size charge you need – and stores up to 30 of your favorite loads in memory for instant recall. The front-to-back layout allows easy access to the scale for right or left-handed users. The clear cover eliminates fluctuations in charge weight caused by air currents. Powder drain lets you easily empty the powder hopper.    Power to the scale is provided by a direct connection from the dispenser to the scale, so there’s is only one power cord to wrangle. If you already own a Chargemaster 1500 scale, the dispenser may be purchased separately. Do not use with black powder. 1911, Issue:11, Page:068 Brownells Christmas , Issue:3X, Page:013 Big Book Catalog, Issue:68, Page:538 Mini-Catalogs, Issue:15, Page:019 Sinclair, Issue:5B, Page:007 Sinclair, Issue:5B, Page:088

    HOT!
  • CO-AX RELOADING PRESS FORSTER More Detail

    CO-AX RELOADING PRESS FORSTER

    $299.99$299.99

    This heavy duty press has several innovative features that make it one of the best reloading presses for threaded dies on the market. The design includes: 1) Snap-in, snap-out die change making die changing a two second operation, 2) Automatic self-acting shellholder which supports the case by spring loaded jaws, 3) Positive spent primer catcher collects spent primers and carbon in a container. This press can be used with all standard 7⁄8"-14 dies (many of them with existing lock rings). Works with all Redding Competition Dies. Big Book Catalog, Issue:68, Page:535 Mini-Catalogs, Issue:15, Page:019 Sinclair, Issue:5B, Page:048 Sinclair, Issue:5B, Page:062

    HOT!
  • DELUXE 3-DIE SETS REDDING More Detail

    DELUXE 3-DIE SETS REDDING

    $74.99 - $279.99$74.99 - $279.99

    The Redding Deluxe Die Sets include the full length sizing die, standard seating die and the neck sizing die. All dies are made using the finest alloy steels obtainable and machined on Hardinge Super-Precision lathes capable of holding the tightest tolerances in the industry. Guaranteed to produce ammunition that will properly fit any standard (SAAMI) chamber. Heat treated in atmospherically controlled furnaces and hand polished for smooth, flawless functioning, these dies will maintain tolerances and last a lifetime. Inspected and ultrasonically cleaned before packaging, the come in a handy die box with a spare decapping pin, hex wrench and a place for your shellholder (sold separately). Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:040 Sinclair, Issue:5B, Page:041 Sinclair, Issue:5B, Page:045

    HOT!
  • WILSON TRIMMER CASE HOLDERS, RIFLE CARTRIDGES L.E. WILSON, INC. More Detail

    WILSON TRIMMER CASE HOLDERS, RIFLE CARTRIDGES L.E. WILSON, INC.

    $11.49 - $12.99$11.49 - $12.99

    Wilson Case Holders hold the case square to the cutter face for trimming as well as inside neck reaming, case mouth deburring, and military crimp removal. Standard Rifle Case Holders Holds the case securely on the body taper. Sinclair, Issue:5B, Page:012

    HOT!
  • 76 STYLE TITANIUM NITRIDE BUSHINGS - .306 TO .368 REDDING More Detail

    76 STYLE TITANIUM NITRIDE BUSHINGS - .306 TO .368 REDDING

    $27.29 - $27.49$27.29 - $27.49

    Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .253 to .305 Determining Redding Bushing Size The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet. If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip. Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip. Sinclair, Issue:1B, Page:043

    HOT!
  • SINCLAIR PRIMING TOOL SINCLAIR INTERNATIONAL More Detail

    SINCLAIR PRIMING TOOL SINCLAIR INTERNATIONAL

    $19.99 - $119.99$19.99 - $119.99

    The Sinclair Priming Tool is one of the finest tools we manufacture. Handloaders around the world have told us “this is the best priming tool in the world”. The Sinclair Priming Tool is manufactured from the finest materials available. The main body, head, and punch housings are all made of stainless steel, the handle is machined from aircraft grade aluminum, and the pins and pushrod are hardened. These materials insure the owner a lifetime of trouble-free use. The Sinclair Priming Tool comes complete with housings and punches for both large and small primers. The tool head utilizes Sinclair Priming Tool Shellholders and locks the case head square to the priming punch. The leverage of the tool is outstanding, yet extremely sensitive so you can feel the primer entering the primer pocket and bottoming out. Our tool is made for single feeding of primers. Our tool is expensive but made with consideration for quality and to provide the user with a well-made tool that will last a lifetime and more. There are no plastic parts to wear or break. Shellholders purchased separately. 1911, Issue:11, Page:065 Big Book Catalog, Issue:68, Page:531 Mini-Catalogs, Issue:15, Page:018 Sinclair, Issue:5B, Page:023

    HOT!
  • COMPETITION SEATER DIES REDDING More Detail

    COMPETITION SEATER DIES REDDING

    $85.99 - $164.99$85.99 - $164.99

    We feel the Redding Competition Bullet Seater is the best bullet 7/8-14 bullet seater on the market today. The machining is precise, and the sliding chamber is the smoothest we have ever experienced in a seater. This micrometer-adjustable die is calibrated in .001"" increments for precise seating depth adjustments and is infinitely adjustable (no clicks). It also has a zero set feature that allows you to zero the micrometer to your favorite seating depth. Sold separately or as part of a set. Also available for handgun and straight wall cartridges. Big Book Catalog, Issue:68, Page:534 Big Book Catalog, Issue:68, Page:535 Sinclair, Issue:5B, Page:036 Sinclair, Issue:5B, Page:038 Sinclair, Issue:5B, Page:042 Sinclair, Issue:5B, Page:043

    HOT!
  • TURBO SONIC POWER PROFESSIONAL ULTRASONIC CLEANER LYMAN More Detail

    TURBO SONIC POWER PROFESSIONAL ULTRASONIC CLEANER LYMAN

    $49.99 - $1,199.99$49.99 - $1,199.99

    Turbo Sonic Power Professional Ultrasonic Cleaner Lyman has introduced the market's largest and most powerful ultrasonic cleaning system: The Turbo Sonic Power Pro. This system's extra long, heated tank and ten powerful industrial transducers allow gunsmiths, armorers or any shooter to quickly and easily clean, lubricate and protect the widest range of metal items. Designed for high volume cleaning or for larger than normal items, the new Turbo Sonic Power Pro's 34-3/4" heated stainless steel tank can easily handle most barreled actions, upper receivers, as well as quantities of handguns. The powerful industrial transducers aggressively deep clean and degrease items, both inside and out. In fact, the Power Pro is such an effective cleaner that Lyman recommends that cleaned parts immediately be ultrasonically treated with Lyman's Turbo Sonic Gun Lube. Changing from cleaning to lubrication is easy with the built in drain system. Designed for volume professional usage, the Power Pro features an all stainless design and professional controls. For complete control of the process, the Power Pro has both a timer and an adjustable heat control. Temperatures up to 175 degrees can be selected. Turbo Sonic "Power Pro" Accessory Lube Tank Now, users of Lyman's industrial strength Power Pro ultrasonic cleaner can easily and completely lube parts without draining the cleaning solution from the unit. This rugged, stainless tank is designed to sit in the Power Pro's cleaning tank wich remains filled with cleaner. The unit's powerful ultrasonic action is transmitted through the cleaning solution into the accessory tank filled with lube. No tank draining or cleaning is required.Thoughtfully designed, the accessory tank's side support brackets and large handles make fast installation and removal easy. This new accessory tank makes the transition from cleaning to lubrication fast and trouble-free resulting in huge time savings. A perfect and necessary accessory for the Power Pro Ultrasonic Cleaner. Allows deep ultrasonic cleaning and sonic lubrication in the same unit. Allows firearms to be lubricated without draining cleaning solution. Side brackets support the accessory tank allowing it to sit in the cleaning solution, transferring the ultrasonic action to the lube. Tough, welded metal construction. Large handles make moving the tank easy. Huge time savings when cleaning multiple firearms Brownells Christmas , Issue:5X, Page:023 Sinclair, Issue:5B, Page:076

    HOT!
  • ULTRA™ MICROMETER SEATER DIES FORSTER More Detail

    ULTRA™ MICROMETER SEATER DIES FORSTER

    $72.99 - $124.69$72.99 - $124.69

    Forster Reloading Dies are of excellent quality and provide the reloader with the ability to produce concentric rounds time and time again. Each die is manufactured from the finest quality steel carefully machined to very tight tolerances. Dies are hand polished both before and after the heat-treating process to guarantee an extra fine finish. All Forster reloading dies feature their Forster Cross Bolt Die Locking Ring that tightens the two ends of the split ring instead of tightening a screw directly into the threads of the die. The Forster Ultra Seater includes all of the features of the Forster Bench Rest Seater Die above, plus an ultra accurate micrometer adjustment. This micrometer adjustment allows you to adjust bullet seating depth from .0005 inch to .001 inch increments, and makes switching bullets easy - just dial back to your previous recorded setting. Forster Ultra Seaters make fine tuning your bullets to the lands of your rifling simple. Big Book Catalog, Issue:68, Page:533 Sinclair, Issue:5B, Page:047

    HOT!
  • 76 STYLE TITANIUM NITRIDE BUSHINGS - .253 TO .305 REDDING More Detail

    76 STYLE TITANIUM NITRIDE BUSHINGS - .253 TO .305 REDDING

    $27.29 - $27.49$27.29 - $27.49

    Heat treated steel bushings as above, but with the addition of a Titanium Nitride coating to further increase the effective surface hardness and reduce sizing friction. Bushings are available throughout the range of .185" thru .368" in .001" increments. The last three digits of the part (#RD76XXX) denotes bushing size. .185 to .252 .306 to .368 Determining Redding Bushing Size The proper bushing size can be easily determined by measuring the outside neck diameter of your loaded cartridges with a precision micrometer or a dial caliper. Then, simply subtract .001" from the cartridge that had the smallest average neck diameter. This diameter bushing will generally size case necks just enough to create the proper press fit for the bullet. If you are using a Type “S” style die and not turning the outside of your case necks, we suggest using a bushing .002" smaller than your smallest average neck diameter, and using the expander ball included with your Type “S” die. This size bushing will still give you minimal sizing (maximizing the life of your brass) and the expander ball will insure that each cartridge has the same bullet grip. Redding has found that when you have cases with neck wall thicknesses on the thin side of the SAAMI tolerance, your fired case will measure considerably larger (.006" to .010" larger) than your loaded rounds. In these circumstances, Redding’s tests have shown that a bushing .001" larger (than the loaded round) may give you the desired bullet grip. Sinclair, Issue:1B, Page:043

    HOT!
  • SINCLAIR BUMP GAGE INSERT SINCLAIR INTERNATIONAL More Detail

    SINCLAIR BUMP GAGE INSERT SINCLAIR INTERNATIONAL

    $9.99 - $15.99$9.99 - $15.99

    Sinclair Bump Gage Inserts are used to measure the amount of shoulder bump when setting up full length sizing dies. Our Bump Gages install in either of our comparator bodies and are machined to fit particular shoulder angles of cartridges. Rather than measuring to the datum line, these gages indicate off of the shoulder of the case to get a better, more easily assessable measurement of how much you are actually sizing your cases. We usually recommend between .001" to .002" bump for bolt action rifles and between .003" and .005" for AR-15 type rifles. Also a useful tool for keeping your brass and loaded ammunition separated if you have multiple rifles chambered for the same cartridge and checking loaded ammunition. Big Book Catalog, Issue:68, Page:531 Big Book Catalog, Issue:68, Page:532 Sinclair, Issue:5B, Page:027 Sinclair, Issue:5B, Page:034

    HOT!
  • FULL LENGTH DIE SETS REDDING More Detail

    FULL LENGTH DIE SETS REDDING

    $46.99 - $189.99$46.99 - $189.99

    The Redding FL Die Sets include the full length (FL) sizing die and the standard seating die. When ordering please give us the Full Length Die Set number. Big Book Catalog, Issue:68, Page:534 Sinclair, Issue:5B, Page:040 Sinclair, Issue:5B, Page:041 Sinclair, Issue:5B, Page:043 Sinclair, Issue:5B, Page:045

    HOT!
  • RIMLESS RIFLE CHAMBERING REAMERS CLYMER More Detail

    RIMLESS RIFLE CHAMBERING REAMERS CLYMER

    $105.00 - $115.00$105.00 - $115.00

    Finest Workmanship & Quality; Made In USA From M-7 High Speed SteelMade by Clymer, a truly dedicated group of gun people, from best quality, M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010" smaller in diameter than the final size, do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut, a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications.Note: If you do not see the caliber you are looking for below, please feel free to contact our Special Orders Department, as many additional items are avaliable from Clymer. AR-15, Issue:11, Page:086 Big Book Catalog, Issue:68, Page:087 Big Book Catalog, Issue:68, Page:493 Mini-Catalogs, Issue:15, Page:007 New Product Supplement, Issue:562, Page:008

    HOT!
  • TYPE S MATCH BUSHING NECK DIE SETS REDDING More Detail

    TYPE S MATCH BUSHING NECK DIE SETS REDDING

    $189.99 - $281.99$189.99 - $281.99

    Type S Match Bushing Neck Die Set contains a Type S Bushing Neck Sizing Die, Body Die, and Competition Seating Die. Sinclair, Issue:5B, Page:038

    HOT!

Subscribe our newsletter

Lorem ipsum dolor sit amet, consectetur adipisicing elit. Ex, velit!